Magnetostriction of single crystal and polycrystalline Tb0.60Dy0.40 at cryogenic temperatures

At cryogenic temperatures, single crystals of TbDy alloys exhibit giant magnetostrictions of nearly 9000 ppm, making these materials promising for engineering service in cryogenic actuators, valves, and positioners. The preparation of single crystals is difficult and costly. Preliminary results on the magnetostriction of textured polycrystalline materials are presented here. For instance, polycrystalline Tb0.60Dy0.40, plane-rolled (one direction of applied stress) to induce crystallographic texture, has shown magnetostrictions at 77 K of 3000 ppm for an applied field of 4.5 kOe and an applied load of 23 MPa, or 48% that of a single crystal under similar conditions. Comparisons are presented between the magnetostrictive response of plane- and form-rolled (two orthogonal directions of applied stress) polycrystalline Tb0.60Dy0.40 at 10 and 77 K. It is reported that at 10 K plane-rolled Tb0.60Dy0.40 exhibits 1600 ppm magnetostriction at an applied field of 4.4 kOe with a minimal applied load of 0.28 MPa. An observed restoration of the initial unstrained state may be a useful feature of polycrystalline materials for engineering service. Finally it is reported that thermal expansion measurements provide a measure of crystallographic texture for comparison with the magnetostriction

Science requirements and the design of cabled ocean observatories

The ocean sciences are beginning a new phase in which scientists will enter the ocean environment and adaptively observe the Earth-Ocean system through remote control of sensors and sensor platforms. This new ocean science paradigm will be implemented using innovative facilities called ocean observatories which provide unprecedented levels of power and communication to access and manipulate real-time sensor networks deployed within many different environments in the ocean basins. Most of the principal design drivers for ocean observatories differ from those for commercial submarine telecommunications systems. First, ocean observatories require data to be input and output at one or more seafloor nodes rather than at a few land terminuses. Second, ocean observatories must distribute a lot of power to the seafloor at variable and fluctuating rates. Third, the seafloor infrastructure for an ocean observatory inherently requires that the wet plant be expandable and reconfigurable. Finally, because the wet communications and power infrastructure is comparatively complex, ocean observatory infrastructure must be designed for low life cycle cost rather than zero maintenance. The origin of these differences may be understood by taking a systems engineering approach to ocean observatory design through examining the requirements derived from science and then going through the process of iterative refinement to yield conceptual and physical designs. This is illustrated using the NEPTUNE regional cabled observatory power and data communications sub-systems

FIREBALL: Instrument pointing and aspect reconstruction

The Faint Intergalactic Redshifted Emission Balloon (FIREBALL) had its first scientific flight in June 2009. The instrument is a 1 meter class balloon-borne telescope equipped with a vacuum-ultraviolet integral field spectrograph intended to detect emission from the inter-galactic medium at redshifts 0.3 < z < 1.0. The scientific goals and the challenging environment place strict constraints on the pointing and tracking systems of the gondola. In this manuscript we briefly review our pointing requirements, discuss the methods and solutions used to meet those requirements, and present the aspect reconstruction results from the first successful scientific flight

Finite time and asymptotic behaviour of the maximal excursion of a random walk

We evaluate the limit distribution of the maximal excursion of a random walk in any dimension for homogeneous environments and for self-similar supports under the assumption of spherical symmetry. This distribution is obtained in closed form and is an approximation of the exact distribution comparable to that obtained by real space renormalization methods. Then we focus on the early time behaviour of this quantity. The instantaneous diffusion exponent $\nu_n$ exhibits a systematic overshooting of the long time exponent. Exact results are obtained in one dimension up to third order in $n^{-1/2}$. In two dimensions, on a regular lattice and on the Sierpi\'nski gasket we find numerically that the analytic scaling $\nu_n \simeq \nu+A n^{-\nu}$ holds.Comment: 9 pages, 4 figures, accepted J. Phys.

Robust magnetotelluric inversion

Author Posting. © The Author(s), 2014. This article is posted here by permission of The Royal Astronomical Society for personal use, not for redistribution. The definitive version was published in Geophysical Journal International 196 (2014): 1365-1374, doi:10.1093/gji/ggt484.A robust magnetotelluric (MT) inversion algorithm has been developed on the basis of quantile-quantile (q-q) plotting with confidence band and statistical modelling of inversion residuals for the MT response function (apparent resistivity and phase). Once outliers in the inversion residuals are detected in the q-q plot with the confidence band and the statistical modelling with the Akaike information criterion, they are excluded from the inversion data set and a subsequent inversion is implemented with the culled data set. The exclusion of outliers and the subsequent inversion is repeated until the q-q plot is substantially linear within the confidence band, outliers predicted by the statistical modelling are unchanged from the prior inversion, and the misfit statistic is unchanged at a target level. The robust inversion algorithm was applied to synthetic data generated from a simple 2-D model and observational data from a 2-D transect in southern Africa. Outliers in the synthetic data, which come from extreme values added to the synthetic responses, produced spurious features in inversion models, but were detected by the robust algorithm and excluded to retrieve the true model. An application of the robust inversion algorithm to the field data demonstrates that the method is useful for data clean-up of outliers, which could include model as well as data inconsistency (for example, inability to fit a 2-D model to a 3-D data set), during inversion and for objectively obtaining a robust and optimal model. The present statistical method is available irrespective of the dimensionality of target structures (hence 2-D and 3-D structures) and of isotropy or anisotropy, and can operate as an external process to any inversion algorithm without modifications to the inversion program.TM was supported by the scientific program of TAIGA (trans-crustal advection and in-situ reaction of global sub-seafloor aquifer) sponsored by the MEXT of Japan, and is supported by the NIPR project KP-7. ADC is supported by US National Science Foundation (NSF) grant EAR1015185

Localization of thermal packets and metastable states in Sinai model

We consider the Sinai model describing a particle diffusing in a 1D random force field. As shown by Golosov, this model exhibits a strong localization phenomenon for the thermal packet: the disorder average of the thermal distribution of the relative distance y=x-m(t), with respect to the (disorder-dependent) most probable position m(t), converges in the limit of infinite time towards a distribution P(y). In this paper, we revisit this question of the localization of the thermal packet. We first generalize the result of Golosov by computing explicitly the joint asymptotic distribution of relative position y=x(t)-m(t) and relative energy u=U(x(t))-U(m(t)) for the thermal packet. Next, we compute in the infinite-time limit the localization parameters Y_k, representing the disorder-averaged probabilities that k particles of the thermal packet are at the same place, and the correlation function C(l) representing the disorder-averaged probability that two particles of the thermal packet are at a distance l from each other. We moreover prove that our results for Y_k and C(l) exactly coincide with the thermodynamic limit of the analog quantities computed for independent particles at equilibrium in a finite sample of length L. Finally, we discuss the properties of the finite-time metastable states that are responsible for the localization phenomenon and compare with the general theory of metastable states in glassy systems, in particular as a test of the Edwards conjecture.Comment: 17 page

Favorable Climate Change Response Explains Non-Native Species' Success in Thoreau's Woods

Invasive species have tremendous detrimental ecological and economic impacts. Climate change may exacerbate species invasions across communities if non-native species are better able to respond to climate changes than native species. Recent evidence indicates that species that respond to climate change by adjusting their phenology (i.e., the timing of seasonal activities, such as flowering) have historically increased in abundance. The extent to which non-native species success is similarly linked to a favorable climate change response, however, remains untested. We analyzed a dataset initiated by the conservationist Henry David Thoreau that documents the long-term phenological response of native and non-native plant species over the last 150 years from Concord, Massachusetts (USA). Our results demonstrate that non-native species, and invasive species in particular, have been far better able to respond to recent climate change by adjusting their flowering time. This demonstrates that climate change has likely played, and may continue to play, an important role in facilitating non-native species naturalization and invasion at the community level

Deficiências de macronutrientes na sota (Glycine max L., Merril, var. IAC-2)

Sintomas de deficiência de macronutrientes foram induzidos na soja, var. IAC-2. Foi verificado o efeito da omissão de N, R, K, Ca, Mg e S no crescimento, produção e composição mineral das folhas.Soybean plants, var. IAC-2 were grown in nutrient solution in presence and absence of macronutrients whose symptoms of deficiency were induced. The main conclusions are as follws : 1) The symptoms of deficiency herein obtained follow the general pattern as found in other plants; 2) growth and yield were drastically reduced by absence of N and Ca from the substrate; 3) omission of on element caused a decrease in its content in the leaves down to deficiency levels, except in the case of S

Height-diameter allometry of tropical forest trees

Tropical tree height-diameter (H:D) relationships may vary by forest type and region making large-scale estimates of above-ground biomass subject to bias if they ignore these differences in stem allometry. We have therefore developed a new global tropical forest database consisting of 39 955 concurrent H and D measurements encompassing 283 sites in 22 tropical countries. Utilising this database, our objectives were: 1. to determine if H:D relationships differ by geographic region and forest type (wet to dry forests, including zones of tension where forest and savanna overlap). 2. to ascertain if the H:D relationship is modulated by climate and/or forest structural characteristics (e.g. stand-level basal area, A). 3. to develop H:D allometric equations and evaluate biases to reduce error in future local-to-global estimates of tropical forest biomass. Annual precipitation coefficient of variation (PV), dry season length (SD), and mean annual air temperature (TA) emerged as key drivers of variation in H:D relationships at the pantropical and region scales. Vegetation structure also played a role with trees in forests of a high A being, on average, taller at any given D. After the effects of environment and forest structure are taken into account, two main regional groups can be identified. Forests in Asia, Africa and the Guyana Shield all have, on average, similar H:D relationships, but with trees in the forests of much of the Amazon Basin and tropical Australia typically being shorter at any given D than their counterparts elsewhere. The region-environment-structure model with the lowest Akaike\u27s information criterion and lowest deviation estimated stand-level H across all plots to within amedian −2.7 to 0.9% of the true value. Some of the plot-to-plot variability in H:D relationships not accounted for by this model could be attributed to variations in soil physical conditions. Other things being equal, trees tend to be more slender in the absence of soil physical constraints, especially at smaller D. Pantropical and continental-level models provided less robust estimates of H, especially when the roles of climate and stand structure in modulating H:D allometry were not simultaneously taken into account