Special Issue on “Advances in Microfluidics Technology for Diagnostics and Detection”

In recent years microfluidics and lab-on-a-chip havecome to the forefront in diagnostics and detection [...

Biosensing on the centrifugal microfluidic lab-on-a-Disc platform

Lab-on-a-Disc (LoaD) biosensors are increasingly a promising solution for many biosensing applications. In the search for a perfect match between point-of-care (PoC) microfluidic devices and biosensors, the LoaD platform has the potential to be reliable, sensitive, low-cost, and easy-to-use. The present global pandemic draws attention to the importance of rapid sample-to-answer PoC devices for minimising manual intervention and sample manipulation, thus increasing the safety of the health professional while minimising the chances of sample contamination. A biosensor is defined by its ability to measure an analyte by converting a biological binding event to tangible analytical data. With evolving manufacturing processes for both LoaDs and biosensors, it is becoming more feasible to embed biosensors within the platform and/or to pair the microfluidic cartridges with low-cost detection systems. This review considers the basics of the centrifugal microfluidics and describes recent developments in common biosensing methods and novel technologies for fluidic control and automation. Finally, an overview of current devices on the market is provided. This review will guide scientists who want to initiate research in LoaD PoC devices as well as providing valuable reference material to researchers active in the field

On the occurrence of Mesophyllum expansum (Philippi) Cabioch et Mendoza (Melobesioideae, Corallinales, Rhodophyta) in the Mediterranean, the Canary Isles and the Azores.

Copyright © 2010 by Walter de Gruyter.We reviewed literature records, examined herbarium specimens and studied new collections referred to as Mesophyllum lichenoides from the Mediterranean and the North Atlantic, and report for the first time the presence of Mesophyllum expansum in the Canaries and the Azores. Both gametophytes and tetrasporophytes of M. expansum occur in the Canaries, while we found only tetrasporophytes (and sterile thalli) of the species in all other regions. We further consider the presence of M. lichenoides further south than Atlantic France in need of confirmation. A comparative study between these two species points to the number of rosette cells as the most reliable and easily diagnosed character, M. expansum most often having 911 and M. lichenoides 68 cells

Ultra-Thin Films of Reduced Graphene Oxide (RGO) Nanoplatelets Functionalized with Different Organic Materials

This work aims the functionalization of reduced graphene oxide nanoplatelets with chitosan (G-chitosan) and also with poly(styrenesulfonic acid) (GPSS), thus forming stable, dispersed aqueous solutions. G-chitosan and GPSS solutions allowed the layer-by-layer (LbL) film formation with glucose oxidase (GOx), establishing multilayered nanostructures with elevated control in thickness and morphology. The graphene nanoplatelets were characterized by UV-vis and FTIR spectroscopies, resulting in good adherence and linear deposition of the graphene nanoplatelets with GOx in the LbL structures.Cyclic voltammetry shows an enlargement in the current intensity with increasing number of deposited LbL layers, possibly owing to the formation of conducting paths by the graphene nanoplatelets in the tailored multilayer nanomaterial forme

Hybrid layer-by-layer (LbL) films of polyaniline, graphene oxide and zinc oxide to detect ammonia

CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPCOORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESReliable gas sensors operating at room temperature are in demand for monitoring the environment for hazardous pollutants, such as ammonia (NH3) gas that may become toxic to humans and animals above a threshold concentration. In this paper we report on the combination of three materials, namely polyaniline (PANI), graphene oxide (GO) and zinc oxide (ZnO), to produce hybrid layer-by-layer (LbL) films used for sensing NH3 with impedance spectroscopy measurements. The deposition of tetralayered PANI/GO/PANI/ZnO LbL films was confirmed with UV-vis. absorption and Raman spectroscopies, while atomic force microscopy (AFM) served to investigate film morphology. Exposure of these LbL films to NH3 caused film roughness to vary, in an effect that depended on the number of tetralayers. Because of synergy in the materials properties, the films with 3 tetralayers were found to be the most adequate for detecting NH3 in the range from 25 ppm to 500 ppm with a response time of 30 s. These figures of merit are adequate for monitoring working environments regarding gas exposure, and highlight the usefulness of the control of film architecture provided by the LbL technique. (C) 2016 Elsevier B.V. All rights reserved.Reliable gas sensors operating at room temperature are in demand for monitoring the environment for hazardous pollutants, such as ammonia (NH3) gas that may become toxic to humans and animals above a threshold concentration. In this paper we report on the combination of three materials, namely polyaniline (PANI), graphene oxide (GO) and zinc oxide (ZnO), to produce hybrid layer-by-layer (LbL) films used for sensing NH3 with impedance spectroscopy measurements. The deposition of tetralayered PANI/GO/PANI/ZnO LbL films was confirmed with UV-vis. absorption and Raman spectroscopies, while atomic force microscopy (AFM) served to investigate film morphology. Exposure of these LbL films to NH3 caused film roughness to vary, in an effect that depended on the number of tetralayers. Because of synergy in the materials properties, the films with 3 tetralayers were found to be the most adequate for detecting NH3 in the range from 25 ppm to 500 ppm with a response time of 30 s. These figures of merit are adequate for monitoring working environments regarding gas exposure, and highlight the usefulness of the control of film architecture provided by the LbL technique.238795801CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPCOORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESCONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPCOORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPES141894/2013-0502391/2014-62012/15543-72012/23880-32013/14262-72014/16789-5The authors thank the financial support from CNPq (141894/2013-0, 502391/2014-6), FAPESP (Grant numbers: 2012/23880-3, 2012/15543-7, 2013/14262-7, 2014/16789-5), CAPES, MCTI-SisNano and EMBRAPA from Brazil. The authors also thank Angelo L. Gobbi and Maria H. O. Piazzetta for their technical assistance in the microfabrication laboratory (LMF/LNNano-LNLS)

Data Set for Wirelessly powered and remotely controlled valve-array for highly multiplexed analytical assay automation on a centrifugal microfluidic platform

Data supporting the paper Sara&iacute; M. Torres Delgadoa, David J. Kinahan, Lourdes Albina Nirupa Julius, Adam Mallette, David S&aacute;enz Ardila, Rohit Mishra, Celina M. Miyazaki, Jan G. Korvink, Jens Ducr&eacute;e, Dario Mager 2018 Wirelessly powered and remotely controlled valve-array for highly multiplexed analytical assay automation on a centrifugal microfluidic platform Biosensors and Bioelectronics https://doi.org/10.1016/j.bios.2018.03.012</span

Experimental and computational investigation of reduced graphene oxide nanoplatelets stabilized in poly(styrene sulfonate) sodium salt

FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOThe production of large-area interfaces and the use of scalable methods to build up designed nanostructures generating advanced functional properties are of high interest for many materials science applications. Nevertheless, large-area coverage remains a major problem even for pristine graphene, and here we present a hybrid, composite graphene-like material soluble in water that can be exploited in many areas such as energy storage, electrodes fabrication, selective membranes and biosensing. Graphene oxide (GO) was produced by the traditional Hummers' method being further reduced in the presence of poly(styrene sulfonate) sodium salt (PSS), thus creating stable reduced graphene oxide (rGO) nanoplatelets wrapped by PSS (GPSS). Molecular dynamics simulations were carried out to further clarify the interactions between PSS molecules and rGO nanoplatelets, with calculations supported by Fourier transform infrared spectroscopy analysis. The intermolecular forces between rGO nanoplatelets and PSS lead to the formation of a hybrid material (GPSS) stabilized by van der Waals forces, allowing the fabrication of high-quality layer-by-layer (LbL) films with poly(allylamine hydrochloride) (PAH). Raman and electrical characterizations corroborated the successful modifications in the electronic structures from GO to GPSS after the chemical treatment, resulting in (PAH/GPSS) LbL films four orders of magnitude more conductive than (PAH/GO).53141004910058FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO2010/13033-62012/01484-92014/11410-82014/24547-12015/14703-92016/00023-