A general inspection and opportunistic replacement policy for one-component systems of variable quality

We model the influence of opportunities in a hybrid inspection and replacement policy. The base policy has two phases: an initial inspection phase in which the system is replaced if found defective; and a later wear-out phase that terminates with replacement and during which there is no inspection. The efficacy of inspection is modelled using the delay time concept. Onto this base model, we introduce events that arise at random and offer opportunities for cost-efficient replacement, and we investigate the efficacy of additional opportunistic replacements within the policy. Furthermore, replacements are considered to be heterogeneous and of variable quality. This is a natural policy for heterogeneous systems. Our analysis suggests that a policy extension that allows opportunities to be utilised offers benefit, in terms of cost-efficiency. This benefit is significant compared to those offered by age-based inspection or preventive replacement. In addition, opportunistic replacement may simplify maintenance planning

A study of postponed replacement in a delay time model

We develop a delay time model for a one component system with postponed replacement to analyze situations in which maintenance might not be executed immediately upon discovery of a defect in the system. Reasons for postponement are numerous: to avoid production disruption or unnecessary or ineffective replacement; to prepare for replacement; to extend component life; to wait for an opportunity. This paper explores conditions that make postponement cost-effective. We are interested in modelling the reality in which a maintainer either prioritizes functional continuity or is not confident of the inspection test indicating a defective state. In some cases more frequent inspection and a longer time limit for postponement are recommended to take advantage of maintenance opportunities, characterized by their low cost, arising after a positive inspection. However, when the cost of failure increases, a significant reduction in the time limit of postponement interval is observed. The examples reveal that both the time to defect arrival and delay time have a significant effect upon the cost-effectiveness of maintenance at the limit of postponement. Also, more simply, we find that opportunities must occur frequently enough and inspection should be a high quality procedure to risk postponement

Imperfect inspection of a system with unrevealed failure and an unrevealed defective state

This paper proposes a model of inspection of a protection system in which the inspection outcome provides imperfect information of the state of the system. The system itself is required to operate on demand typically in emergency situations. The purpose of inspection is to determine the functional state of the system and consequently whether the system requires replacement. The system state is modeled using the delay time concept in which the failed state is preceded by a defective state. Imperfect inspection is quantified by a set of probabilities that relate the system state to the outcome of the inspection. The paper studies the effect of these probabilities on the efficacy of inspection. The analysis indicates that preventive replacement mitigates low quality inspection and that inspection is cost-effective provided the imperfect-inspection probabilities are not too large. Some derivative policies in which replacement is “postponed” following a positive inspection are also studied. An isolation valve in a utility network motivates the modeling

Conditional inspection and maintenance of a system with two interacting components

In this paper we consider the inspection and maintenance of a two-component system with stochastic dependence. A failure of component 1 may induce the defective state in component 2 which in turn leads to its failure. A failure of component 1 and a defect in component 2 are detected by inspection. Our model considers a conditional inspection policy: when component 1 is found to have failed, inspection of component 2 is triggered. This opportunistic inspection policy is a natural one to use given this stochastic dependence between the components. The long-run cost per unit time (cost-rate) of the conditional inspection policy is determined generally. A real system that cuts rebar mesh motivates the model development. The numerical examples reveal that when the ratio of the cost of corrective system replacement, that is on failure, to the cost of preventive system replacement is large there exists a finite optimum policy in most cases. Moreover, for the studied system wherein inspections of component 2 are expensive relative to those of component 1, having a reliable indicator of the defective state in component 2 is a good strategy to avoid costly failures of component 2, particularly when its time to failure is short

Modelling inspection and replacement quality for a protection system

An inspection and replacement policy for a protection system is described by a mathematical model that incorporates multiple aspects of maintenance quality. A three-state component failure model is assumed, with a defective state preceding failure. The quality of maintenance intervention is modelled by supposing that inspections may misclassify defects (false positives and false negatives) and further that an inspection may induce a defect. The quality of replacement is modelled by supposing that a component arises from a heterogeneous population, composed of weak and strong items and with the mixing parameter determining quality. Isolation valves used in water distribution systems motivate the model development, and a case study is considered in this context. We evaluate the impact of these aspects of the quality of maintenance upon cost and production losses. Defect induction is found to be a key determinant of the cost-optimal policy. The proposed model allows us to verify conditions that justify investment in higher quality maintenance, and thus to provide guidance for prioritization of this investment

Delay-time modelling of a critical system subject to random inspections

We model the inspection-maintenance of a critical system in which the execution of inspections is random. The models we develop are interesting because they mimic realities in which production is prioritised over maintenance, so that inspections might be impeded or they might be opportunistic. Random maintenance has been modelled by others but there is little in the literature that relates to inspection of a critical system. We suppose that the critical system can be good, defective or failed, and that failure impacts on production, so that a failure is immediately revealed, but a defect does not. A defect, if revealed at inspection, is a trigger for replacement. We compare the cost and reliability of random inspections with scheduled periodic inspections and discuss the implications for practice. Our results indicate that inspections that are performed opportunistically rather than scheduled periodically may offer an economic advantage provided opportunities are sufficiently frequent and convenient. A hybrid inspection and replacement policy, with inspections subject to impediments, is robust to departure from its inspection schedule. Keywords: Maintenance; reliability; random inspection; production; qualit

O IMPACTO DOS FATORES INTRA E EXTRAESCOLARES PARA O FRACASSO ESCOLAR: DESMISTIFICANDO AS VISÕES PSICOLOGIZANTES

Existem muitas discussões sobre fatores relacionados ao fracasso escolar, inúmeras vezes relaciona-se aspectos sociais erroneamente como elementos determinantes do processo de aprendizagem. O presente artigo objetiva elencar os fatores extraescolares e intraescolares que interferem diretamente no fracasso escolar, bem como analisar historicamente a perpetuação desses fatores relevantes que associam a esta ideia como algo que impossibilita a capacidade do indivíduo de aprender, contribuindo para o sofrimento psicossocial do sujeito. O processo escolar é algo que não pode ser engessado, nesse cenário de diversidades, a instituição pode e deve criar situações que promovam mudanças. A Psicologia surge então, não para estruturar e construir novos conceitos sobre o fracasso escolar, mas com desafio de intervir nesta situação, sendo ela um dos instrumentos que apresenta novas possibilidades de atuação, a fim de reverter esse quadro e favorecer essa reestruturação. Para se obter as informações, foi realizada uma revisão bibliográfica em diversas plataformas como, Scielo, Pepsic, dados do INEP, teses de mestrado, bem como também a biblioteca do campus do Centro Universitário Tiradentes – UNIT, com intuito da disseminação de conhecimentos, para que se retire a concepção de fracasso escolar como problema individual, bem como a importância de intervenções preventivas

Nut production in Bertholletia excelsa across a logged forest mosaic: implications for multiple forest use

Although many examples of multiple-use forest management may be found in tropical smallholder systems, few studies provide empirical support for the integration of selective timber harvesting with non-timber forest product (NTFP) extraction. Brazil nut (Bertholletia excelsa, Lecythidaceae) is one of the world’s most economically-important NTFP species extracted almost entirely from natural forests across the Amazon Basin. An obligate out-crosser, Brazil nut flowers are pollinated by large-bodied bees, a process resulting in a hard round fruit that takes up to 14 months to mature. As many smallholders turn to the financial security provided by timber, Brazil nut fruits are increasingly being harvested in logged forests. We tested the influence of tree and stand-level covariates (distance to nearest cut stump and local logging intensity) on total nut production at the individual tree level in five recently logged Brazil nut concessions covering about 4000 ha of forest in Madre de Dios, Peru. Our field team accompanied Brazil nut harvesters during the traditional harvest period (January-April 2012 and January-April 2013) in order to collect data on fruit production. Three hundred and ninety-nine (approximately 80%) of the 499 trees included in this study were at least 100 m from the nearest cut stump, suggesting that concessionaires avoid logging near adult Brazil nut trees. Yet even for those trees on the edge of logging gaps, distance to nearest cut stump and local logging intensity did not have a statistically significant influence on Brazil nut production at the applied logging intensities (typically 1–2 timber trees removed per ha). In one concession where at least 4 trees ha-1 were removed, however, the logging intensity covariate resulted in a marginally significant (0.09) P value, highlighting a potential risk for a drop in nut production at higher intensities. While we do not suggest that logging activities should be completely avoided in Brazil nut rich forests, when a buffer zone cannot be observed, low logging intensities should be implemented. The sustainability of this integrated management system will ultimately depend on a complex series of socioeconomic and ecological interactions. Yet we submit that our study provides an important initial step in understanding the compatibility of timber harvesting with a high value NTFP, potentially allowing for diversification of forest use strategies in Amazonian Perù