Use of electron beam lithography to selectively decompose metalorganics into patterned thin‐film superconductors

Fine line superconductors, approximately 5 μm in width and 260 nm thick, were formed from Y‐Ba‐Cu on 〈100〉SrTiO3 by the combined methods of metalorganic deposition and selective area electron beam exposure. The lines were written in metal neodecanoates using an electron beam having a spot size of 0.25 μm and an energy of 25 kV. The dosage of the exposure was 1200 μC/cm2. Unexposed areas were removed with a 30 s xylene wash. A 500 °C pyrolysis in air for 300 s followed by rapid thermal annealing in oxygen produced lines having superconducting onsets above 90 K and zero resistance at 69 K.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/70966/2/APPLAB-53-6-526-1.pd

Colossal magnetocapacitance and scale-invariant dielectric response in phase-separated manganites

Thin films of strongly-correlated electron materials (SCEM) are often grown epitaxially on planar substrates and typically have anisotropic properties that are usually not captured by edge-mounted four-terminal electrical measurements, which are primarily sensitive to in-plane conduction paths. Accordingly, the correlated interactions in the out-of-plane (perpendicular) direction cannot be measured but only inferred. We address this shortcoming and show here an experimental technique in which the SCEM under study, in our case a 600 Angstrom-thick (La1-yPry)0.67Ca0.33MnO3 (LPCMO) film, serves as the base electrode in a metal-insulator-metal (MIM) trilayer capacitor structure. This unconventional arrangement allows for simultaneous determination of colossal magnetoresistance (CMR) associated with dc transport parallel to the film substrate and colossal magnetocapacitance (CMC) associated with ac transport in the perpendicular direction. We distinguish two distinct strain-related direction-dependent insulator-metal (IM) transitions and use Cole-Cole plots to establish a heretofore unobserved collapse of the dielectric response onto a universal scale-invariant power-law dependence over a large range of frequency, temperature and magnetic field.Comment: 32 pages, 4 figures, Supplementary section included, Submitted to Nature Physic

CALIFA : a diameter-selected sample for an integral field spectroscopy galaxy survey

JMA acknowledges support from the European Research Council Starting Grant (SEDmorph; P.I. V. Wild).We describe and discuss the selection procedure and statistical properties of the galaxy sample used by the Calar Alto Legacy Integral Field Area (CALIFA) survey, a public legacy survey of 600 galaxies using integral field spectroscopy. The CALIFA "mother sample" was selected from the Sloan Digital Sky Survey (SDSS) DR7 photometric catalogue to include all galaxies with an r-band isophotal major axis between 45 '' and 79 : 2 '' and with a redshift 0 : 005 M-r > -23 : 1 and over a stellar mass range between 10(9.7) and 10(11.4) M-circle dot. In particular, within these ranges, the diameter selection does not lead to any significant bias against - or in favour of - intrinsically large or small galaxies. Only below luminosities of M-r = -19 (or stellar masses <10(9.7) M-circle dot) is there a prevalence of galaxies with larger isophotal sizes, especially of nearly edge-on late-type galaxies, but such galaxies form <10% of the full sample. We estimate volume-corrected distribution functions in luminosities and sizes and show that these are statistically fully compatible with estimates from the full SDSS when accounting for large-scale structure. For full characterization of the sample, we also present a number of value-added quantities determined for the galaxies in the CALIFA sample. These include consistent multi-band photometry based on growth curve analyses; stellar masses; distances and quantities derived from these; morphological classifications; and an overview of available multi-wavelength photometric measurements. We also explore different ways of characterizing the environments of CALIFA galaxies, finding that the sample covers environmental conditions from the field to genuine clusters. We finally consider the expected incidence of active galactic nuclei among CALIFA galaxies given the existing pre-CALIFA data, finding that the final observed CALIFA sample will contain approximately 30 Sey2 galaxies.Peer reviewe

The supportive care needs of women experiencing gynaecological cancer: a Western Australian cross-sectional study

Background: Women diagnosed with gynaecological cancer experience supportive care needs that require care provision to reduce the impact on their lives. International evidence suggests supportive care needs of women with gynaecological cancer are not being met and provision of holistic care is a priority area for action. Knowledge on gynaecological cancer supportive care needs is limited, specifically comparison of needs and cancer gynaecological subtype. Our aim was to identify supportive care needs of Western Australian women experiencing gynaecological cancer, their satisfaction with help and explore associations between participant’s demographic characteristics and identified needs. Methods: A cross-sectional design incorporating a modified version of the Supportive Care Needs Survey - short form (SCNS-SF34) assessed 37 supportive care needs under five domains in conjunction with demographic data. Three hundred and forty three women with gynaecological cancer attending a tertiary public referral hospital completed the survey over 12 months. Statistical analysis was performed using the R environment for statistical computing. A linear regression model was fitted with factor scores for each domain and demographic characteristics as explanatory variables. Results: Three hundred and three women (83%) identified at least one moderate or high level supportive care need. The five highest ranked needs were, ‘being informed about your test results as soon as feasible’ (54.8%), ‘fears about cancer spreading’ (53.7%), ‘being treated like a person not just another case’ (51.9%), ‘being informed about cancer which is under control or diminishing (that is, remission)’ (50.7%), and ‘being adequately informed about the benefits and side-effects of treatments before you choose to have them’ (49.9%). Eight of the top ten needs were from the ‘health system and information’ domain. Associations between supportive care items and demographic variables revealed ‘cancer type’, and ‘time since completion of treatment’ had no impact on level of perceived need for any domain. Conclusions: Western Australian women with gynaecological cancer identified a high level of supportive care needs. The implementation of a supportive care screening tool is recommended to ensure needs are identified and care is patient-centred. Early identification and management of needs may help to reduce the burden on health system resources for managing ongoing needs

Performance of the Superconducting Corrector Magnet Circuits during the Commissioning of the LHC

The LHC is a complex machine requiring more than 7400 superconducting corrector magnets distributed along a circumference of 26.7 km. These magnets are powered in 1446 different electrical circuits at currents ranging from 60 A up to 600 A. Among the corrector circuits the 600 A corrector magnets form the most diverse and differentiated group. All together, about 60000 high current connections had to be made. A fault in a circuit or one of the superconducting connections would have severe consequences for the accelerator operation. All magnets are wound from various types of Nb-Ti superconducting strands, and many contain parallel protection resistors to by-pass the current still flowing in the other magnets of the same circuit when they quench. In this paper the performance of these magnet circuits is presented, focussing on the quench behaviour of the magnets. Quench detection and the performance of the electrical interconnects will be dealt with. The results as measured on the entire circuits are compared to the test results obtained at the reception of the individual magnets

Murine 3T3-L1 Adipocyte Cell Differentiation Model: Validated Reference Genes for qPCR Gene Expression Analysis

BACKGROUND: Analysis of gene expression at the mRNA level, using real-time quantitative reverse transcription polymerase chain reaction (qRT-PCR), mandatorily requires reference genes (RGs) as internal controls. However, increasing evidences have shown that RG expression may vary considerably under experimental conditions. We sought for an appropriate panel of RGs to be used in the 3T3-L1 cell line model during their terminal differentiation into adipocytes. To this end, the expression levels of a panel of seven widely used RG mRNAs were measured by qRT-PCR. The 7 RGs evaluated were ß-actin (ACTB), glyceraldehyde-3-phosphate dehydrogenase (GAPDH), hypoxanthine phosphoribosyl-transferase I (HPRT), ATP synthase H+ transporting mitochondrial F1 complex beta subunit (ATP-5b), tyrosine 3-monooxygenase/tryptophan 5- monooxygenase activation protein, zeta polypeptide (Ywhaz), Non-POU-domain containing octamer binding protein (NoNo), and large ribosomal protein L13a (RPL). METHODOLOGY/PRINCIPAL FINDINGS: Using three Excel applications, GeNorm, NormFinder and BestKeeper, we observed that the number and the stability of potential RGs vary significantly during differentiation of 3T3-L1 cells into adipocytes. mRNA expression analyses using qRT-PCR revealed that during the entire differentiation program, only NoNo expression is relatively stable. Moreover, the RG sets that were acceptably stable were different depending on the phase of the overall differentiation process (i.e. mitotic clonal expansion versus the terminal differentiation phase). RPL, ACTB, and Ywhaz, are suitable for terminal differentiation, whereas ATP-5b and HPRT, are suitable during mitotic clonal expansion. CONCLUSION: Our results demonstrate that special attention must be given to the choice of suitable RGs during the various well defined phases of adipogenesis to ensure accurate data analysis and that the use of several RGs is absolutely required. Consequently, our data show for the first time, that during mitotic clonal expansion, the most suitable RGs are ATP-5b, NoNo and HPRT, while during terminal differentiation the most suitable RGs are, NoNo, RPL, ACTB and Ywhaz

Two-dimensional multi-component photometric decomposition of CALIFA galaxies

We present a two-dimensional multi-component photometric decomposition of 404 galaxies from the Calar Alto Legacy Integral Field Area Data Release 3 (CALIFA-DR3). They represent all possible galaxies with no clear signs of interaction and not strongly inclined in the final CALIFA data release. Galaxies are modelled in the g, r, and i Sloan Digital Sky Survey (SDSS) images including, when appropriate, a nuclear point source, bulge, bar, and an exponential or broken disc component. We use a human-supervised approach to determine the optimal number of structures to be included in the fit. The dataset, including the photometric parameters of the CALIFA sample, is released together with statistical errors and a visual analysis of the quality of each fit. The analysis of the photometric components reveals a clear segregation of the structural composition of galaxies with stellar mass. At high masses (log(M⋆/M⊙) > 11), the galaxy population is dominated by galaxies modelled with a single Sérsic or a bulge+disc with a bulge-to-total (B/T) luminosity ratio B/T > 0.2. At intermediate masses (9.5 < log(M⋆/M⊙) < 11), galaxies described with bulge+disc but B/T < 0.2 are preponderant, whereas, at the low mass end (log(M⋆/M⊙)< 9.5), the prevailing population is constituted by galaxies modelled with either pure discs or nuclear point sources+discs (i.e., no discernible bulge). We obtain that 57% of the volume corrected sample of disc galaxies in the CALIFA sample host a bar. This bar fraction shows a significant drop with increasing galaxy mass in the range 9.5 < log(M⋆/M⊙) < 11.5. The analyses of the extended multi-component radial profile result in a volume-corrected distribution of 62%, 28%, and 10% for the so-called Type I (pure exponential), Type II (down-bending), and Type III (up-bending) disc profiles, respectively. These fractions are in discordance with previous findings. We argue that the different methodologies used to detect the breaks are the main cause for these differences.PostprintPeer reviewe

Performance of the Main Dipole Magnet Circuits of the LHC during Commissioning

During hardware commissioning of the Large Hadron Collider (LHC), 8 main dipole circuits are tested at 1.9 K and up to their nominal current. Each dipole circuit contains 154 magnets of 15 m length, and has a total stored energy of up to 1.3 GJ. All magnets are wound from Nb-Ti superconducting Rutherford cables, and contain heaters to quickly force the transition to the normal conducting state in case of a quench, and hence reduce the hot spot temperature. In this paper the performance of the first three of these circuits is presented, focussing on quench detection, heater performance, operation of the cold bypass diodes, and magnet-to-magnet quench propagation. The results as measured on the entire circuits will be compared to the test results obtained during the reception tests of the individual magnets

Impact of Reference Gene Selection for Target Gene Normalization on Experimental Outcome Using Real-Time qRT-PCR in Adipocytes

Background: With the current rise in obesity-related morbidities, real-time quantitative reverse transcription polymerase chain reaction (qRT-PCR) has become a widely used method for assessment of genes expressed and regulated by adipocytes. In order to measure accurate changes in relative gene expression and monitor intersample variability, normalization to endogenous control genes that do not change in relative expression is commonly used with qRT-PCR determinations. However, historical evidence has clearly demonstrated that the expression profiles of traditional control genes (e.g., b-actin, GAPDH, a-tubulin) are differentially regulated across multiple tissue types and experimental conditions. Methodology/Principal Findings: Therefore, we validated six commonly used endogenous control genes under diverse experimental conditions of inflammatory stress, oxidative stress, synchronous cell cycle progression and cellular differentiation in 3T3-L1 adipocytes using TaqMan qRT-PCR. Under each study condition, we further evaluated the impact of reference gene selection on experimental outcome using examples of target genes relevant to adipocyte function and differentiation. We demonstrate that multiple reference genes are regulated in a condition-specific manner that is not suitable for use in target gene normalization. Conclusion/Significance: Data are presented demonstrating that inappropriate reference gene selection can have profound influence on study conclusions ranging from divergent statistical outcome to inaccurate data interpretation of significan

Absence of Morphotropic Phase Boundary Effects in BiFeO3-PbTiO3 Thin Films Grown via a Chemical Multilayer Deposition Method

Here, we report the unusual behaviour shown by the (BiFeO3)1-x-(PbTiO3)x (BF-xPT) films prepared using a multilayer deposition approach by chemical solution deposition method. Thin film samples of various compositions were prepared by depositing several bilayers of BF and PT precursors by varying the BF or PT layer thicknesses. X-ray diffraction showed that final samples of all compositions show mixing of the two compounds resulting in a single phase mixture, also confirmed by transmission electron microscopy. In contrast to bulk equilibrium compositions, our samples show a monoclinic (MA type) structure suggesting disappearance of morphotropic phase boundary (MPB) about x = 0.30 as observed in the bulk. This is accompanied by the lack of any enhancement of remnant polarization at MPB as shown by the ferroelectric measurements. Magnetic measurements show that the magnetization of the samples increases with increasing BF content. Significant magnetization of the samples indicates melting of spin spirals in the BF-xPT arising from random distribution of iron atoms across the film. Absence of Fe2+ ions in the films was corroborated by X-ray photoelectron spectroscopy measurements. The results illustrate that used thin film processing methodology significantly changes the structural evolution in contrast to predictions from the equilibrium phase diagram as well as modify the functional characteristics of BP-xPT system dramatically.Comment: 15 pages, 6 figure