131 research outputs found
Wind Turbines with Permanent Magnet Synchronous Generator and Full-Power Converters: Modelling, Control and Simulation
Optimal Design of a Wide Area Measurement System Using Hybrid Wireless Sensors and Phasor Measurement Units
Allocation of fast-acting energy storage systems in transmission grids with high renewable generation
The major challenge in coordinating between fast-acting energy storage systems (FA-ESSs) and renewable energy sources (RESs) in the existing transmission grid is to determine the location and capacity of the FA-ESS in the power systems. The optimal allocation of FA-ESS with conventional hourly discrete time method (DTM) can result in the increased operation cost, non-optimal placements and larger storage capacity and therefore, having an opposite effect on the operation. Accordingly, in this paper, a continuous-time method (CTM) is proposed to coordinate FA-ESS and RESs to cover fast fluctuations of renewable generations (RGs). Besides, based on the CTM, an adaptive interval-based robust optimization framework, to deal with uncertainty of the RGs, has been proposed. The proposed optimal allocation of FA-ESS with CTM provides the best sitting and sizing for the installation of the FA-ESSs and the best possible continuous-time scheduling plan for FA-ESSs. Also, in other to have better implementations of their ramping capability to track the continuous-time changes and deviations of the RGs rather than hourly DTM. The proposed model has been implemented and evaluated on the IEEE Reliability Test System (IEEE-RTS).fi=vertaisarvioitu|en=peerReviewed
Adaptive Optimal Control of Faulty Nonlinear DC Microgrids with Constant Power Loads: Dual-Extended Kalman Filter Approach
This article investigates the problem of estimating actuator fault and states and controlling the bus voltage in direct current microgrids (DC MGs) with linear and nonlinear constant power loads (CPLs). It is considered that the DC MG states are not fully measurable and the utilized sensors are not ideal and noisy. Additionally, the actuator fault occurs and it is modeled as an additive term in the power system dynamics. These issues, including nonlinearities, un-measurable states, noisy measures, and actuator fault indispensably degrade the operation of the DC MG. To solve this issue, initially, a dual-extended Kalman filter (dual-EKF) is suggested for the fault and state estimation. It decomposes the process of estimating the state and actuator fault to reduce the online computational burden. For the control purpose, a linear parameter varying (LPV) model predictive control (MPC) is suggested to regulate the current and voltage of the DC MG. It benefits the nonlinear system modeling of LPV representation and constrained-based design procedure of the MPC to result in an accurate and low online computational burden dealing with system constraints. By deploying the overall robust adaptive dual-EKF estimation-based LPV-MPC, there is no need to have any prior knowledge of all system states and actuator faults in prior. The theoretical analysis and controller design are validated by numerical simulations on a typical islanded DC MG and comparisons are done with state-of-the-art estimation and control strategies.©2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.fi=vertaisarvioitu|en=peerReviewed
A Dynamic Collusion Analysis Framework Considering Generation and Transmission Systems Maintenance Constraints
Capacity withholding of generation companies is an important issue in market monitoring procedures. The capacity withholding can be intensified in the transmission and generation constrained system. The strategic maintenance of market participants can impose multiple constraints on the system and changes the wholesale electricity market prices. The strategic maintenance of transmission and generation facilities is known as dynamic capacity withholding (DCW) and all of the market-monitoring units need algorithms to detect and reduce DCW. In this paper, a new dynamic capacity withholding index is presented. The method is analyzed on the IEEE 30, 57-bus test system. The numerical results show the effectiveness of the proposed index.©2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.fi=vertaisarvioitu|en=peerReviewed
Optimal sizing and siting of smart microgrid components under high renewables penetration considering demand response
The purpose of this article is to determine the size and place of different components in microgrids (MGs) including renewable energy resources (RERs). Various factors like reliability, the uncertainty of wind speed, solar irradiance, load, and load growth are considered. The Ekbatan residential complex is studied as the pilot case study placed in Tehran, Iran. Ekbatan complex has three separate sets of buildings called phase 1, 2, and 3 considered as smart MGs. The multi‐objective optimisation problem is solved considering RERs uncertainties, improving reliability and power quality and minimizing power loss by particle swarm optimisation algorithm. Different constraints in terms of voltage, frequency, resources, and energy storage systems (ESSs) capacity are taken into consideration. The effect of load growth, photovoltaic (PV) and ESSs placement, changing the capital cost of RERs, and demand response of controllable loads are studied on optimal sizing and siting. The proposed method is tested on a wind turbine/PV/fuel cell (FC)/hydrogen tank MGs system and the optimal sizing and siting of mentioned sources could decelerate the rate of increase in the total cost of MG considering the load growth.©2019 IET. This paper is a postprint of a paper submitted to and accepted for publication in IET Renewable Power Generation and is subject to Institution of Engineering and Technology Copyright. The copy of record is available at the IET Digital Library.fi=vertaisarvioitu|en=peerReviewed
Storage and Transmission Capacity Requirements of a Remote Solar Power Generation System
Large solar power stations are usually located in remote areas and connect to the main grid via a long transmission line. The energy storage unit is deployed locally with the solar plant to smooth its output. Capacities of the grid-connection transmission line and the energy storage unit have a significant impact on the utilization rate of solar energy, as well as the investment cost. This article characterizes the feasible set of capacity parameters under a given solar spillage rate and a fixed investment budget. A linear programming-based projection algorithm is proposed to obtain such a feasible set, offering valuable references for system planning and policy making.©2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.fi=vertaisarvioitu|en=peerReviewed
Multicarrier Microgrid Operation Model Using Stochastic Mixed Integer Linear Programming
The microgrid operation is addressed in this article based on a multicarrier energy hub. Natural gas, electricity, heating, cooling, hydrogen, carbon dioxide, and renewable energies are considered as the energy carriers. The designed microgrid optimizes and utilizes a wide range of resources at the same time including renewables, electrical storage, hybrid storage, heating-cooling storage, electric vehicles (EVs) charging station, power to gas unit, combined cooling-heating-power, and carbon capture-storage. The purpose is to reduce the environmental pollutions and operating costs. The resilience and flexibility of the energy hub is also improved. Vehicle to grid and fully-partial charge models are incorporated for EVs to improve the system resilience and supplying the critical loads following events. Different events are modeled to evaluate the system resilience. The model is expressed as a stochastic mixed integer linear programming problem. Both active and reactive powers are modeled. The microgrid is simulated under four different cases. The results show that the multitype energy storages reduce the annual cost of energy while the integrated charging station can decrease the load shedding.©2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.fi=vertaisarvioitu|en=peerReviewed
An Optimized Uncertainty-Aware Training Framework for Neural Networks
Uncertainty quantification (UQ) for predictions generated by neural networks (NNs) is of vital importance in safety-critical applications. An ideal model is supposed to generate low uncertainty for correct predictions and high uncertainty for incorrect predictions. The main focus of state-of-the-art training algorithms is to optimize the NN parameters to improve the accuracy-related metrics. Training based on uncertainty metrics has been fully ignored or overlooked in the literature. This article introduces a novel uncertainty-aware training algorithm for classification tasks. A novel predictive uncertainty estimate-based objective function is defined and optimized using the stochastic gradient descent method. This new multiobjective loss function covers both accuracy and uncertainty accuracy (UA) simultaneously during training. The performance of the proposed training framework is compared from different aspects with other UQ techniques for different benchmarks. The obtained results demonstrate the effectiveness of the proposed framework for developing the NN models capable of generating reliable uncertainty estimates.© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.fi=vertaisarvioitu|en=peerReviewed
Risk-Averse Optimal Energy and Reserve Scheduling for Virtual Power Plants Incorporating Demand Response Programs
This paper addresses the optimal bidding strategy problem of a virtual power plant (VPP) participating in the dayahead (DA), real-time (RT) and spinning reserve (SR) markets (SRMs). The VPP comprises a number of dispatchable energy resources (DERs), renewable energy resources (RESs), energy storage systems (ESSs) and a number of customers with flexible demand. A two-stage risk-constrained stochastic problem is formulated for the VPP scheduling, where the uncertainty lies in the energy and reserve prices, RESs production, load consumption, as well as calls for reserve services. Based on this model, the VPP bidding/offering strategy in the DA market (DAM), RT market (RTM) and SRM is decided aiming to maximize the VPP profit considering both supply and demandsides (DS) capability for providing reserve services. On the other hand, customers participate in demand response (DR) programs by using load curtailment (LC) and load shifting (LS) options as well as by providing reserve service to minimize their consumption costs. The proposed model is implemented on a test VPP and the optimal decisions are investigated in detail through a numerical study. Numerical simulations demonstrate the effectiveness of the proposed scheduling strategy and its operational advantages and the computational effectiveness.© Institute of Electrical and Electronics Engineers.fi=vertaisarvioitu|en=peerReviewed
- …