4,286 research outputs found
Optimization of ω-3 fatty acid production by microalgae: Crossover effects of CO2 and light intensity under batch and continuous cultivation modes
The microalga Pavlova lutheri is a potential source of economically valuable docosahexaenoic and eicosapentaenoic
acids. Specific chemical and physical
culture conditions may enhance their biochemical synthesis. There are studies relating the effect of CO2 on growth; however, this parameter should not be assessed independently, as its effect strongly depends on the light intensity available. In this research, the combined effects of light intensity and CO2 content on growth and fatty acid profile in
P. lutheri were ascertained, in order to optimize polyunsaturated fatty acid production. The influence of the operation mode was also tested via growing the cultures by batch and by continuous cultivation. Higher light intensities associated with lower dilution rates promoted increases in both cell population
and weight per cell. Increased levels of CO2 favored the total lipid content, but decreased the amounts of polyunsaturated fatty acids. Mass productivities of
eicosapentaenoic acid (3.61 ± 0.04 mg . L⁻¹ . d⁻¹) and docosahexaenoic acid (1.29 ± 0.01 mg . L⁻¹. d⁻¹) were obtained in cultures supplied with 0.5% (v/v) CO2, at a dilution rate of 0.297 d)1 and a light intensity of
120 µE . m-2 . s-1
Why nature has elected Michaelis-Menten kinetics for enzymes: a tentative rationale from variational calculus
The kinetic performance of enzymes, the catalysts designed by nature to accelerate the chemical reactions that support life, has traditionally been described in terms of a rate expression first derived by Michaelis and Menten in the beginning of this century. Why nature has selected such kinetic behaviour remains, however, a mystery. A tentative rationale based on Euler's equation was developed and, after having eliminated functional forms due to physico-chemical unfeasibility, a final open-form objective function (written as an infinite series and including dependencies on the substrate concentration, on the reaction rate, and on the derivative thereof with respect to concentration) is found. The integral of such an objective function is maximized by Michaelis-Menten kinetics and yields its maximum value when the upper integration limit is roughly equal to the Michaelis-Menten constant
Kinetic modeling of the autotrophic growth of pavlova lutheri: Study of the combined influence of light and temperature
The optimization and control of biochemical processes require the previous establishment of mathematical models that can describe the effect of process variables on their actual kinetics. Environmental temperature is a modulating factor to which the algal cells respond continuously by adjusting their rates of cellular reactions, their nutritional requirements, and, consequently, their biomass composition. Light intensity is an exhaustible resource, indispensable to autotrophic organisms. The effects of light intensity and temperature on growth of the microalga Pavlova lutheri, which have hardly been considered to date in a simultaneous fashion, were experimentally assessed using a factorial experimental design; in this way, the effects of each variable independently and their interactions could be quantified, using maximum biomass (Xmax) or maximum specific growth rate (μmax) as objective functions. The preliminary results produced indicated that light intensity plays a more important role on μmax than temperature; in the case of Xmax, both temperature and, to a lesser extent, light intensity do apparently play a role. The highest values of Xmax were associated with low temperatures and high light intensities; a similar behavior could be observed for μmax concerning light intensity, although the dependency on temperature did not seem to be as important. A more complex mechanistic model was then postulated, incorporating light and temperature as input variables, which was successfully fitted to the experimental data generated during batch cultivation of P. lutheri.info:eu-repo/semantics/acceptedVersio
Nitric Oxide Regulates Neurogenesis in the Hippocampus following Seizures
Hippocampal neurogenesis is changed by brain injury. When neuroinflammation accompanies injury, activation of resident microglial cells promotes the release of inflammatory cytokines and reactive oxygen/nitrogen species like nitric oxide (NO). In these conditions, NO promotes proliferation of neural stem cells (NSC) in the hippocampus. However, little is known about the role of NO in the survival and differentiation of newborn cells in the injured dentate gyrus. Here we investigated the role of NO following seizures in the regulation of proliferation, migration, differentiation, and survival of NSC in the hippocampus using the kainic acid (KA) induced seizuremouse model. We show that NO increased the proliferation of NSC and the number of neuroblasts following seizures but was detrimental to the survival of newborn neurons. NO was also required for the maintenance of long-term neuroinflammation. Taken together, our data show that NO positively contributes to the initial stages of neurogenesis following seizures but compromises survival of newborn neurons.Foundation for Science and Technology (FCT, Portugal); COMPETE; FEDER [PTDC/SAU-NEU/102612/2008, PTDC/NEU-OSD/0473/2012, PEst-C/SAU/LA0001/2013-2014, PEst-OE/EQB/LA0023/2013-2014]; FCT, Portugal [SFRH/BPD/78901/2011, SFRH/BD/77903/2011
Influence of albumin on the tribological behavior of Ag-Ti (C, N) thin films for orthopedic implants
With the increase of elderly population and the health problems arising nowadays, such as cancer, knee and hip joint prostheses are widely used worldwide. It is estimated that 20% of hip replacement surgeries simply fail after 5 years, due to wear loosening, instability and infection. In this paper it is reported the study of advanced materials with the ability to overcome some of these drawbacks. The development of ceramic coatings, based on carbonitrides of transition metals, such as TiCN, doped with silver, Ag, may represent an effective solution. Thin films of Ag-TiCN were produced by dc reactive magnetron sputtering with silver contents ranging from 4 to 8 at. %. The physical, chemical, structural, morphological/topographical, mechanical and tribological properties were evaluated. The tribological tests were performed in a unidirectional wear simulator, pin on disc, being the antagonists of a ceramic Al2O3 ball, and using simulate body fluids as lubricant. Hank’s Balanced Salt Solution (HBSS) and bovine serum albumin (BSA) in HBSS were chosen, in order to evaluate the lubrication ability of the solution containing the protein, albumin.
The results revealed that the coatings with Ag content ranging from 4 to 8 at. %, were the most promising, as the tribological properties were superior to the results reported by other authors, which also developed Ag-TiCN coatings containing similar Ag contents and using similar test conditions. The presence of albumin lead to a lower wear in all the test conditions, and this enhancement was higher in the hydrophobic surfaces.This research is sponsored by FEDER funds through the program COMPETE - Programa Operacional Factores de Competitividade and by National funds through FCT - Fundacao para a Ciencia e a Tecnologia, in the framework of the Strategic Projects PEST-C/FIS/UI607/2011, and PEst-C/EME/UI0285/2011 and under the project, PTDC/CTM/102853/2008
Simultaneous effect of irradiance and temperature on biochemical composition of the microalga Pavlova lutheri
The biochemical composition of microalgae can be modulated through the environmental conditions prevailing during growth. The simultaneous effects of irradiance and
temperature on the biochemical composition of Pavlova lutheri were evaluated using an experimental star factorial design. Five levels were tested for each parameter (temperature, 10, 14, 18, 22 and 26°C; irradiance, 60, 105, 150, 195 and 240 μmol photons m−2 s−1), whereas the carbohydrate,
protein, lipid, pigments and elementary compound contents were measured as response variables. Additionally, in order
to rapidly measure parameters to define the status of the culture, the validation of the relationships between biochemical
parameters and physiological status were estimated through regression analysis. It was observed that irradiance and temperature play a major role in the determination of the biochemical composition of microalgae. Their effects are synergistic, and it can be observed that a trend in behaviour
at a certain temperature can be reversed at a different temperature; therefore, when selecting the environmental conditions to a culture they must be studied in a combined fashion. Although there are consistent relationships between pigment contents and elementary compounds in cells, its linearity is influenced by the irradiance of the culture and its
age; therefore, they can only be applied in specific circumstances. On the other side, population biomass was well estimated in terms of carotenoid content, irrespective of the environmental conditions provided and the growth phase
Microalgal reactors: a review of enclosed system designs and performances
One major challenge to industrial microalgal culturing is to devise and develop technical apparata,
cultivation procedures and algal strains susceptible of undergoing substantial increases in
efficiency of use of solar energy and carbon dioxide. Despite several research efforts developed
to date, there is no such thing as “the best reactor system”- defined, in an absolute fashion, as
the one able to achieve maximum productivity with minimum operation costs, irrespective of
the biological and chemical system at stake. In fact, choice of the most suitable system is situationdependent,
as both the species of alga available and the final purpose intended will play a role.
The need of accurate control impairs use of open-system configurations, so current investigation
has focused mostly on closed systems. In this review, several types of closed bioreactors described
in the technical literature as able to support production of microalgae are comprehensively
presented and duly discussed, using transport phenomenon and process engineering methodological
approaches. The text is subdivided into subsections on: reactor design, which includes tubular
reactors, flat plate reactors and fermenter-type reactors; and processing parameters, which include
gaseous transfer, medium mixing and light requirements
Salmonella spp. in pet reptiles in Portugal : prevalence and chlorhexidine gluconate antimicrobial efficacy
Research Areas: Infectious Diseases ; Pharmacology & PharmacyABSTRACT - A fraction of human Salmonella infections is associated with direct contact with reptiles,
yet the number of reptile-associated Salmonellosis cases are believed to be underestimated. Existing
data on Salmonella spp. transmission by reptiles in Portugal is extremely scarce. The aim of the
present work was to evaluate the prevalence of Salmonella spp. in pet reptiles (snakes, turtles, and
lizards), as well as evaluate the isolates’ antimicrobial resistance and virulence profiles, including
their ability to form biofilm in the air-liquid interface. Additionally, the antimicrobial effect of
chlorhexidine gluconate on the isolates was tested. Salmonella was isolated in 41% of the animals
sampled and isolates revealed low levels of antimicrobial resistance. Hemolytic and lypolytic
phenotypes were detected in all isolates. The majority (90.63%) of the Salmonella isolates were positive
for the formation of pellicle in the air-liquid interface. Results indicate chlorhexidine gluconate is
an effective antimicrobial agent, against the isolates in both their planktonic and biofilm forms,
demonstrating a bactericidal effect in 84.37% of the Salmonella isolates. This study highlights the
possible role of pet reptiles in the transmission of non-typhoidal Salmonella to humans, a serious and
increasingly relevant route of exposure in the Salmonella public health framework.info:eu-repo/semantics/publishedVersio
Production and characterization of a new dextrin based hydrogel
Dextrin is a polymer composed of α-(1→4) D-glucose units produced by partial hydrolysis of starch. In this work, the transesterification of the soluble polysaccharide with vinyl acrylate (VA) was carried out in anhydrous dimethylsulfoxide (DMSO). The effect of the water activity and of the enzyme Proleather, on the reaction rates, was analysed. Different
degrees of substitution (DS) ranging from ca. 10% to 70% were obtained by controlling the molar ratio of VA to dextrin.
Gels were obtained by free radical polymerization of dextrin-VA, with different degrees of substitution and monomer concentration, in water. A comprehensive solid state-NMR analysis of the hydrogels was performed. These hydrogels are
being developed as scaffold materials for bioactive molecule and cell delivery, tissue engineering and a variety of other biomedical
applications
Evaluating mechanical properties of Paroxetine loaded filaments to enable printability by fused deposition modelling
Poster presented at the 13th PBP World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology. Rotterdam, The Netherlands, 28-31 March 2022N/
- …