39 research outputs found

    Preoperative digital three-dimensional planning for rhinoplasty

    Get PDF
    BACKGROUND: This report describes preoperative digital planning for rhinoplasty using a new three-dimensional (3D) radiologic viewer that allows both patients and surgeons to visualize on a common monitor the 3D real aspect of the nose in its inner and outer sides. METHODS: In the period 2002 to 2008, 210 patients underwent rhinoplasty procedures in the authors' clinic. The patients were randomly divided into three groups according to the type of preoperative planning used: photos only, a simulated result by Adobe Photoshop, or the 3D radiologic viewer. The parameters evaluated included the number of patients that underwent surgery after the first consultation, the number of patients who asked for a reintervention, patient satisfaction (according to a test given to the patients 12 months postoperatively), the surgical time required for a functional intervention, and the improvement in nasal function by postoperative rhinomanometry and subjective evaluation. RESULTS: Computer-aided technologies led to a higher number of patients deciding to undergo a rhinoplasty. Simulation of the postoperative results was not as useful in the postoperative period due to the higher number of reintervention requests. CONCLUSION: The patients undergoing rhinoplasties preferred new technologies in the preoperative period. The advantages of using the 3D radiologic viewer included improved preoperative planning, reduction in intraoperative stress, a higher number of patients undergoing surgery, reduction in postoperative surgical corrections, reduction in surgical time for the functional intervention, a higher rate of improvement in nasal function, a higher percentage of postoperative satisfaction, and reduced costs

    Major Allergen Content in Allergen Immunotherapy Products: The Limited Value of Numbers

    Full text link
    The prevalence of allergic disorders has increased drastically over the last 50 years to the extent that they can be considered epidemic. At present, allergen-specific immunotherapy (AIT) is the only therapy that targets the underlying cause of allergic disorders, and evidence of its superiority is based on data accumulated from clinical trials and observational studies demonstrating efficacy and safety. However, several aspects remain unresolved, such as harmonization and standardization of manufacturing and quantification procedures across manufacturers, homogeneous reporting of strength, and the establishment of international reference standards for many allergens. This article discusses issues related to the measurement of major allergen content in AIT extracts, raising the question of whether comparison of products from different manufacturers is an appropriate basis for selecting a specific AIT product. Allergen standardization in immunotherapy products is critical for ensuring quality and, thereby, safety and efficacy. However, lack of harmonization in manufacturing processes, allergen quantification (methodologies and references), national regulatory differences, clinical practice, and labeling shows that the comparison of AIT products based solely on major allergen amounts is not rational and, in fact, impossible. Moreover, when rating the information given for a specific product, it is necessary to take into account further inherent characteristics of products and their application in clinical practice, such as the state of extract modification, addition of adjuvant or adjuvant system, route of administration (sublingual/ subcutaneous), and cumulative dose as per posology (including the volume per administration). Finally, only convincing clinical data can serve as the basis for product-specific evaluation and cross-product comparability of individual products

    Anticoagulant selection in relation to the SAMe-TT2R2 score in patients with atrial fibrillation. the GLORIA-AF registry

    Get PDF
    Aim: The SAMe-TT2R2 score helps identify patients with atrial fibrillation (AF) likely to have poor anticoagulation control during anticoagulation with vitamin K antagonists (VKA) and those with scores >2 might be better managed with a target-specific oral anticoagulant (NOAC). We hypothesized that in clinical practice, VKAs may be prescribed less frequently to patients with AF and SAMe-TT2R2 scores >2 than to patients with lower scores. Methods and results: We analyzed the Phase III dataset of the Global Registry on Long-Term Oral Antithrombotic Treatment in Patients with Atrial Fibrillation (GLORIA-AF), a large, global, prospective global registry of patients with newly diagnosed AF and ≥1 stroke risk factor. We compared baseline clinical characteristics and antithrombotic prescriptions to determine the probability of the VKA prescription among anticoagulated patients with the baseline SAMe-TT2R2 score >2 and ≤ 2. Among 17,465 anticoagulated patients with AF, 4,828 (27.6%) patients were prescribed VKA and 12,637 (72.4%) patients an NOAC: 11,884 (68.0%) patients had SAMe-TT2R2 scores 0-2 and 5,581 (32.0%) patients had scores >2. The proportion of patients prescribed VKA was 28.0% among patients with SAMe-TT2R2 scores >2 and 27.5% in those with scores ≤2. Conclusions: The lack of a clear association between the SAMe-TT2R2 score and anticoagulant selection may be attributed to the relative efficacy and safety profiles between NOACs and VKAs as well as to the absence of trial evidence that an SAMe-TT2R2-guided strategy for the selection of the type of anticoagulation in NVAF patients has an impact on clinical outcomes of efficacy and safety. The latter hypothesis is currently being tested in a randomized controlled trial. Clinical trial registration: URL: https://www.clinicaltrials.gov//Unique identifier: NCT01937377, NCT01468701, and NCT01671007

    Comparative effectiveness and safety of non-vitamin K antagonists for atrial fibrillation in clinical practice: GLORIA-AF Registry

    Get PDF
    Background and purpose: Prospectively collected data comparing the safety and effectiveness of individual non-vitamin K antagonists (NOACs) are lacking. Our objective was to directly compare the effectiveness and safety of NOACs in patients with newly diagnosed atrial fibrillation (AF). Methods: In GLORIA-AF, a large, prospective, global registry program, consecutive patients with newly diagnosed AF were followed for 3 years. The comparative analyses for (1) dabigatran vs rivaroxaban or apixaban and (2) rivaroxaban vs apixaban were performed on propensity score (PS)-matched patient sets. Proportional hazards regression was used to estimate hazard ratios (HRs) for outcomes of interest. Results: The GLORIA-AF Phase III registry enrolled 21,300 patients between January 2014 and December 2016. Of these, 3839 were prescribed dabigatran, 4015 rivaroxaban and 4505 apixaban, with median ages of 71.0, 71.0, and 73.0 years, respectively. In the PS-matched set, the adjusted HRs and 95% confidence intervals (CIs) for dabigatran vs rivaroxaban were, for stroke: 1.27 (0.79–2.03), major bleeding 0.59 (0.40–0.88), myocardial infarction 0.68 (0.40–1.16), and all-cause death 0.86 (0.67–1.10). For the comparison of dabigatran vs apixaban, in the PS-matched set, the adjusted HRs were, for stroke 1.16 (0.76–1.78), myocardial infarction 0.84 (0.48–1.46), major bleeding 0.98 (0.63–1.52) and all-cause death 1.01 (0.79–1.29). For the comparison of rivaroxaban vs apixaban, in the PS-matched set, the adjusted HRs were, for stroke 0.78 (0.52–1.19), myocardial infarction 0.96 (0.63–1.45), major bleeding 1.54 (1.14–2.08), and all-cause death 0.97 (0.80–1.19). Conclusions: Patients treated with dabigatran had a 41% lower risk of major bleeding compared with rivaroxaban, but similar risks of stroke, MI, and death. Relative to apixaban, patients treated with dabigatran had similar risks of stroke, major bleeding, MI, and death. Rivaroxaban relative to apixaban had increased risk for major bleeding, but similar risks for stroke, MI, and death. Registration: URL: https://www.clinicaltrials.gov. Unique identifiers: NCT01468701, NCT01671007. Date of registration: September 2013

    Social Bonding and Nurture Kinship: Compatibility between Cultural and Biological Approaches

    Full text link

    American College of Rheumatology Provisional Criteria for Clinically Relevant Improvement in Children and Adolescents With Childhood-Onset Systemic Lupus Erythematosus

    Get PDF
    10.1002/acr.23834ARTHRITIS CARE & RESEARCH715579-59

    Comparison of FCS-MPC Strategies in a Grid-Connected Single-Phase Quasi-Z Source Inverter

    Get PDF
    This paper compares two finite-control-set model predictive control (FCS-MPC) strategies in the context of a grid-connected single-phase quasi-Z source inverter (SP-qZSI). Both schemes use discrete-time models of the inductor current and capacitor voltage for the DC side, as well as the output current on the AC side. To enhance the converter’s performance, given the non-minimum phase characteristics of the DC side, a long prediction horizon is implemented for the predictive control. However, a horizon of this nature can be highly demanding in terms of processing load, rendering it inapplicable for some microcontrollers. To address this issue and mitigate the processing load, an alternative control strategy is presented that divides the total number of candidate solutions to be evaluated into smaller segments. The performance of the two control strategies is compared using total harmonic distortion (THD) and simulation times as evaluation metrics. The results indicate that the proposed strategy achieves significantly shorter simulation times than the compared control strategy when increasing the prediction horizon. Additionally, a reduction in the THD was observed in the proposed strategy, reaching an average of 2.8%, which is lower than the compared strategy that exhibited THD close to 3.5%

    Anion influence in lead removal from aqueous solution by deposition onto a vitreous carbon electrode

    No full text
    We investigated the electrolytic removal of Pb(II) from aqueous solutions containing different electrolytes (nitrate, chloride or sulfate), by electrolysis onto reticulated vitreous carbon electrode (RVC). The efficiency of the electrolytic process of lead removal was found to be a function of electrolyte composition. The chloride containing electrolyte, provided the highest efficiency of lead removal, while removing Pb(II) from the sulfate electrolytes turned out to be a very difficult and high energy consuming process. Cyclic voltammetry and the atomic force microscopy (AFM) were used to characterize lead deposits on RVC and fractured vitreous carbon (FVC) electrodes surface. Our study showed that in the chloride solution, a significantly larger amount of lead deposit was formed than in the sulfate electrolyte. Since the same phenomenon was observed with both electrode types, the FVC electrode is established as an appropriate laboratory model for studying the RVC, which is often used in industrial applications. AFM analysis revealed that lead deposits formed from different electrolyte solutions possess different surface morphologies, indicating different mechanism of formation or different kinds of interactions between the metal adlayer and the adsorbed anions. A highly dense lead deposit, spread all over the electrode surface, in the form of a 2-D film, was found when using the chloride-containing electrolyte. This was attributed to the surface annealing effect and the increased number of nucleation sites due to chloride coadsorption at the electrode surface. Deposits formed from the sulfate electrolyte consisted of numerous, isolated and rather small lead clusters, indicating that deposition from sulfate solutions was inhibited by the formation of the passivated salt adlayer over the lead clusters.<br/
    corecore