Fabrication and Characterization of Electrospun Semiconductor Nanoparticle—Polyelectrolyte Ultra-Fine Fiber Composites for Sensing Applications

Fluorescent composite fibrous assembles of nanoparticle-polyelectrolyte fibers are useful multifunctional materials, utilized in filtration, sensing and tissue engineering applications, with the added benefits of improved mechanical, electrical or structural characteristics over the individual components. Composite fibrous mats were prepared by electrospinning aqueous solutions of 6 wt% poly(acrylic acid) (PAA) loaded with 0.15 and 0.20% v/v, carboxyl functionalized CdSe/ZnS nanoparticles (SNPs). The resulting fluorescent composite fibrous mats exhibits recoverable quenching when exposed to high humidity. The sensor response is sensitive to water concentration and is attributed to the change in the local charges around the SNPs due to deprotonation of the carboxylic acids on the SNPs and the surrounding polymer matrix

Metabolic and Hormonal Changes After Laparoscopic Roux-en-Y Gastric Bypass and Sleeve Gastrectomy: a Randomized, Prospective Trial

BACKGROUND: The mechanisms of amelioration of glycemic control early after laparoscopic Roux-en-Y gastric bypass (LRYGB) or laparoscopic sleeve gastrectomy (LSG) are not fully understood. METHODS: In this prospective, randomized 1-year trial, outcomes of LRYGB and LSG patients were compared, focusing on possibly responsible mechanisms. Twelve patients were randomized to LRYGB and 11 to LSG. These non-diabetic patients were investigated before and 1 week, 3 months, and 12 months after surgery. A standard test meal was given after an overnight fast, and blood samples were collected before, during, and after food intake for hormone profiles (cholecystokinin (CCK), ghrelin, glucagon-like peptide 1 (GLP-1), peptide YY (PYY)). RESULTS: In both groups, body weight and BMI decreased markedly and comparably leading to an identical improvement of abnormal glycemic control (HOMA index). Post-surgery, patients had markedly increased postprandial plasma GLP-1 and PYY levels (p > 0.05) with ensuing improvement in glucose homeostasis. At 12 months, LRYGB ghrelin levels approached preoperative values. The postprandial, physiologic fluctuation returned, however, while LSG ghrelin levels were still markedly attenuated. One year postoperatively, CCK concentrations after test meals increased less in the LRYGB group than they did in the LSG group, with the latter showing significantly higher maximal CCK concentrations (p > 0.012 vs. LRYGB). CONCLUSIONS: Bypassing the foregut is not the only mechanism responsible for improved glucose homeostasis. The balance between foregut (ghrelin, CCK) and hindgut (GLP-1, PYY) hormones is a key to understanding the underlying mechanisms

A rapid screening tool for psychological distress in children 3--6years old: results of a validation study.

International audienceABSTRACT: BACKGROUND: The mental health needs of young children in humanitarian contexts often remain unaddressed. The lack of a validated, rapid and simple tool for screening combined with few mental health professionals able to accurately diagnose and provide appropriate care mean that young children remain without care. Here, we present the results of the principle cross-cultural validation of the "Psychological Screening for Young Children aged 3 to 6" (PSYCAa3-6). The PSYCa 3--6 is a simple scale for children 3 to 6 years old administered by non-specialists, to screen young children in crises and thereby refer them to care if needed. METHODS: This study was conducted in Maradi, Niger. The scale was translated into Hausa, using corroboration of independent translations. A cross-cultural validation was implemented using quantitative and qualitative methods. A random sample of 580 mothers or caregivers of children 3 to 6 years old were included. The tool was psychometrically examined and diagnostic properties were assessed comparing the PSYCa 3--6 against a clinical interview as the gold standard. RESULTS: The PSYCa 3--6 Hausa version demonstrated good concurrent validity, as scores correlated with the gold standard and the Clinical Global Impression Severity Scale (CGI-S) [rho = 0.41, p-value = 0.00]. A reduction procedure was used to reduce the scale from 40 to 22 items. The test-retest reliability of the PSYCa 3--6 was found to be high (ICC 0.81, CI95% [0.68; 0.89]). In our sample, although not the purpose of this study, approximately 54 of 580 children required subsequent follow-up with a psychologist. CONCLUSIONS: To our knowledge, this is the first validation of a screening scale for children 3 to 6 years old with a cross-cultural validation component, for use in humanitarian contexts. The Hausa version of the PSYCa 3--6 is a reliable and a valuable screening tool for psychological distress. Further studies to replicate our findings and additional validations of the PSYCa 3--6 in other populations may help improve the delivery of mental health care to children

Cross-linking chitosan nanofibers

In the present study, we have electrospun various grades of chitosan and cross-linked them using a novel method involving glutaraldehyde (GA) vapor, utilizing a Schiff base imine functionality. Chemical, structural, and mechanical analyses have been conducted by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Kawabata microtensile testing, respectively. Additionally, the solubilities of the as-spun and cross-linked chitosan mats have been evaluated;solubility was greatly improved after cross-linking. SEM images displayed evidence that unfiltered low, medium, and high molecular weight chitosans, as well as practical-grade chitosan, can be electrospun into nanofibrous mats. The as-spun medium molecular weight chitosan nanofibers have a Young\u27s modulus of 154.9 ± 40.0 MPa and display a pseudo-yield point that arose due to the transition from the pulling of a fibrous mat with high cohesive strength to the sliding and elongation of fibers. As-spun mats were highly soluble in acidic and aqueous solutions. After cross-linking, the medium molecular weight fibers increased in diameter by an average of 161 nm, have a decreased Young\u27s modulus of 150.8 ± 43.6 MPa, and were insoluble in basic, acidic, and aqueous solutions. Though the extent to which GA penetrates into the chitosan fibers is currently unknown, it is evident that the cross-linking resulted in increased brittleness, a color change, and the restriction of fiber sliding that resulted in the loss of a pseudo-yield point

One-step electrospinning of cross-linked chitosan fibers

Chitin is a nitrogen-rich polysaccharide that is abundant in crustaceans, mollusks, insects, and fungi and is the second most abundant organic material found in nature next to cellulose. Chitosan, the N-deacetylated derivative of chitin, is environmentally friendly, nontoxic, biodegradable, and antibacterial. Fibrous mats are typically used in industries for filter media, catalysis, and sensors. Decreasing fiber diameters within these mats causes many beneficial effects such as increased specific surface area to volume ratios. When the intrinsically beneficial effects of chitosan are combined with the enhanced properties of nanofibrous mats, applications arise in a wide range of fields, including medical, packaging, agricultural, and automotive. This is particularly important as innovative technologies that focus around bio-based materials are currently of high urgency, as they can decrease dependencies on fossil fuels. We have demonstrated that Schiff base cross-linked chitosan fibrous mats can be produced utilizing a one-step electrospinning process that is 25 times faster and, therefore, more economical than a previously reported two-step vapor-cross-linking method. These fibrous mats are insoluble in acidic, basic, and aqueous solutions for 72 h. Additionally, this improved production method results in a decreased average fiber diameter, which measures 128 ± 40 nm. Chemical and structural analyses were conducted utilizing Fourier transform infrared spectroscopy, solubility studies, and scanning electron microscopy

Solid state characterization of α-chitin from Vanessa cardui Linnaeus wings

Material properties of the painted lady butterfly, Vanessa cardui Linnaeus were investigated using typical material science techniques. The examined butterflies were raised and hatched from the larvae stage and their chemical and crystalline structure evaluated and compared to that of crab shell (α-chitin) and squid pens from Notodarus sloanii and Loligo pealei (β-chitin). Fourier transmission infrared spectroscopy (FTIR) and X-ray diffraction (XRD) revealed that the painted lady butterflies are composed of α-chitin. Additionally, macro- and microstructure characterization of the chitins was conducted utilizing digital photography and field emission scanning electron microscopy (FESEM). This work demonstrates that common characterization techniques combined with simple sample preparation of biological materials can yield successful material characterization, which could aide the fabrication of biomimetic materials

Crosslinking Poly(allylamine) Fibers Electrospun from Basic and Acidic Solutions

Mechanically robust, non-toxic polymer fiber mats are promising materials for a range of biomedical applications; however, further research into enhancing polymer selection is needed. In this study, poly(allylamine) (PAH), an amine-containing polyelectrolyte, was successfully electrospun from aqueous solutions into continuous, cylindrical fibers with a mean diameter of 150 ± 41 nm. A one-step crosslinking method using glutaraldehyde provides insight into the chemical and morphological changes that result from altering the molar ratio of amine to aldehyde groups, whereas a two-step crosslinking method yielded chemically and mechanically robust mats. These results indicate PAH fibrous mats synthesized from aqueous solutions could potentially be applied in biomedical applications

Carboxymethyl chitosan as a matrix material for platinum, gold, and silver nanoparticles

Carboxymethyl chitosan (CMC) was evaluated for its use in the synthesis and stabilization of catalytic nanoparticles for the first time. Many studies have reported on the ability of chitosan to bind with metal ions and support metal nanoparticles. CMC has a higher reported chelation capacity than chitosan, which has potential implications for improved catalyst formation and immobilization. Platinum, gold, and silver nanoparticles were synthesized in both chitosan and CMC. Particle size, morphology, and aggregation were examined using transmission electron microscopy (TEM). Complexation of nanoparticles was studied through Fourier transform infrared spectroscopy (FTIR). Similar nanoparticle size distributions were observed in the two polymers; however, CMC was observed to have higher rates of aggregation. This indicates that the carboxymethyl groups did not change nanoparticle formation; however, poor cross-linking and a limited anchoring ability of CMC led to the inability to immobilize the catalyst materials effectively

Chitin and chitosan: Transformations due to the electrospinning process

Electrospinning is a complex process that requires numerous interacting physical instabilities. Assuming that a chosen polymer and solvent system can be spun, the chosen polymer exists in various states, which have variable crystallinities starting with the highest degree of crystallinity (when in bulk form) and ultimately being transformed into a non-woven mat. In an effort to better understand the effects that the electrospinning process has on the biopolymers chitin [practical grade (PG)] and chitosan [PG and medium molecular weight (MMW)], including post-production neutralization and cross-linking steps, field emission scanning electron microscopy (FESEM) and solubility studies were performed. An evaluation of diffraction peaks of the bulk, solution, and fibrous forms of chitin and chitosan were evaluated by X-ray diffraction (XRD) and determined that the formation of chitosan chains is influenced by the addition of solvent and cross-linking agent. This study is of importance since the crystallinity of chitin and chitosan directly relate to the ability of the biopolymers to chelate metals, and the chemical stability of non-woven mats aid in the creation of functional filtration membranes