1,012 research outputs found
Spinodally synthesized magnetoelectric
This is the publisher's version, also available electronically from http://scitation.aip.org/content/aip/journal/apl/91/8/10.1063/1.2767174.Lead zirconium titanate/nickel ferrite (PZT/NFO) composites have been produced by crystallizing and spinodally decomposing a gel in a magnetic field below the Curie temperature of NFO. The gel had been formed by spinning a sol onto a silicon substrate. The ensuing microstructure, characterized by atomic force microscopy, magnetic force microscopy, (Lorentz) transmission electron microscopy, and scanning electron microscopy, is nanoscopically periodic and, determined by the direction of magnetic annealing field, anisotropic. The wavelength of the PZT/NFO alternation, 25nm, agrees within a factor of 2 with the theoretically estimated value. The macroscopic ferromagnetic and magnetoelectric responses correspond qualitatively and semiquantitatively to the features of the nanostructure. The maximum of the field dependent magnetoelectric susceptibility equals 1.8V∕cmOe
Non-volatility of ferroelectric SBT thin fims, at 75ºC
[ES] El estudio de la no volatilidad de una memoria FeRAM de tantalato de bismuto y estroncio, SrBi2Ta2O9 (SBT) en condiciones
reales de uso, requiere la caracterización ferroeléctrica del material en forma de lámina delgada a temperaturas por encima
del ambiente. Para ello se han depositado láminas de SBT mediante un método sol-gel, sobre substratos de
Pt/TiO2/SiO2/Si(100), seleccionándose condensadores de área 5.10-4 cm-2. Basándonos en las medidas de la variación de la
polarización con el tiempo (retención) realizadas a temperatura ambiente y a 75ºC, analizamos la viabilidad del material
como una FeRAM en condiciones reales de uso.[EN] The study of the non-volatility of Strontium bismuth tantalate SrBi2Ta2O9 (SBT) FeRAM memory, at real operating conditions,
requires the ferroelectric characterisation of the material, as a thin film, above the room temperature.As a result, it has been
deposited SBT films by the sol-gel method, onto Pt/TiO2/SiO2/Si (100) substrates, using capacitors of 5 x 10–4 cm-2 .In this
work, we analysed the viability of this material as a FeRAM memory in real operating conditions, as a result of the variation
of the polarisation measurements with time (retention), performed at room temperature and 75ºC.Este trabajo ha sido realizado con el apoyo del proyecto de
la CICYT MAT98-1068.Peer reviewe
Feasibility of (Pb, Ca)TiO3 thin films deposited on Pt/TiO2/SiO2/Si(100) for switching applications
[ES] Se han depositado láminas delgadas de (Pb,Ca)TiO3 sobre substratos de Pt/TiO2/SiO2/Si(100) por centrifugación, partiendo
de soluciones sintetizadas por sol -gel. La concentración de las soluciones y el contenido de PbO se seleccionaron para minimizar
las tensiones de las láminas cristalizadas y obtener la adecuada estequiometria. La cristalización mediante un calentamiento
rápido (RTP), conduce a láminas con orientaciones preferentes [001]/[001], reducida capa interfacial ferroeléctrico-Pt
y composición deseada. Los parámetros ferroeléctricos obtenidos muestran una mejora de las propiedades. Estas láminas presentan
una fatiga y envejecimiento mucho más moderados que otros materiales alternativos depositados sobre substratos
iguales, lo que permite considerar al método descrito como muy valioso para conseguir materiales susceptibles de emplear en
aplicaciones de conmutación.[EN] (Pb,Ca)TiO3 ferroelectric thin films have been spin-coated on Pt/TiO2/SiO2/Si(100) substrates from sol-gel synthesized solutions.
Selecting the solution concentrations and the excess of PbO content, stoichiometric composicion with reduced strains are
obtained. Crystallization process by rapid thermal treatment (RTP) promote preferred orientations [001]/[100] resulting a thiner
ferroelectric-platinum interface layer, which causes the improvement of fatigue and retain behaviour, despite the use of
platinum electrodes. These experimental finds let to cosider the described methode of processing very convenient to prepare
thin films of this composition to use on switching applications such as non volatil RAM memories.Peer reviewe
Superintegrability and higher order polynomial algebras II
In an earlier article, we presented a method to obtain integrals of motion
and polynomial algebras for a class of two-dimensional superintegrable systems
from creation and annihilation operators. We discuss the general case and
present its polynomial algebra. We will show how this polynomial algebra can be
directly realized as a deformed oscillator algebra. This particular algebraic
structure allows to find the unitary representations and the corresponding
energy spectrum. We apply this construction to a family of caged anisotropic
oscillators. The method can be used to generate new superintegrable systems
with higher order integrals. We obtain new superintegrable systems involving
the fourth Painleve transcendent and present their integrals of motion and
polynomial algebras.Comment: 11 page
LAF1, a MYB transcription activator for phytochrome A signaling
The photoreceptor phytochrome (phy) A has a well-defined role in regulating gene expression in response to specific light signals. Here, we describe a new Arabidopsis mutant, laf1 (long after far-red light 1) that has an elongated hypocotyl specifically under far-red light. Gene expression studies showed that laf1 has reduced responsiveness to continuous far-red light but retains wild-type responses to other light wavelengths. As far-red light is only perceived by phyA, our results suggest that LAF1 is specifically involved in phyA signal transduction. Further analyses revealed that laf1 is affected in a subset of phyA-dependent responses and the phenotype is more severe at low far-red fluence rates. LAF1 encodes a nuclear protein with strong homology with the R2R3-MYB family of DNA-binding proteins. Experiments using yeast cells identified a transactivation domain in the C-terminal portion of the protein. LAF1 is constitutively targeted to the nucleus by signals in its N-terminal portion, and the full-length protein accumulates in distinct nuclear speckles. This accumulation in speckles is abolished by a point mutation in a lysine residue (K258R), which might serve as a modification site by a small ubiquitin-like protein (SUMO)
Influencia de las propiedades de la fábrica de la catedral de León en su comportamiento estructural
Mechanical and physical properties of the masonry have a considerable bearing on the structural behaviour. Ancient buildings, like Leon’s cathedral, show uncertainty about real condition of the material and even structural compounds. These uncertainties make it difficult to assessment the bearing capacity of the structure and the affect of the restorations. This paper shows a study to select the most influential material’s parameters on the structural behaviour. The study is based on a sensitiveness analysis.The study starts with a structural analysis to select the most responsible areas of the transversal structural section. Then, the structural calculation is done by modifying the value of the material’s parameters in the expected scatter band. The statistical study provides the most influential parameters on the structural masonry behaviour. Finally the conclusions are proponed.Las propiedades de un material como la fábrica influyen de forma determinante en el comportamiento de la estructura. En una estructura histórica, como la catedral de León, se añade la incertidumbre del estado real del material y la composición de sus elementos estructurales. Estos aspectos dificultan la evaluación de la capacidad resistente de la estructura y la incidencia de actuaciones de reparación o remodelación. Este trabajo presenta el estudio realizado para seleccionar, mediante un análisis de sensibilidad del comportamiento de la estructura, cuáles son las variables del material que más afectan al comportamiento estructural de la catedral.El estudio se inicia con el análisis estructural de la sección tipo para identificar las zonas de mayor responsabilidad. A continuación se hace el estudio estructural con la combinación de todas las variables, especialmente las dependientes de los materiales, modificando su valor. Mediante un tratamiento estadístico de los resultados, se determina qué parámetros de los adoptados afectan más al comportamiento de la estructura de fábrica y se establecen las conclusiones
CHR11, a chromatin-remodeling factor essential for nuclear proliferation during female gametogenesis in Arabidopsis thaliana
Chromatin-remodeling factors regulate the establishment of transcriptional programs during plant development. Although 42 genes encoding members of the SWI2/SNF2 family have been identified in Arabidopsis thaliana, < 10 have been assigned a precise function on the basis of a mutant phenotype, and none have been shown to play a specific role during the gametophytic phase of the plant life cycle. A. thaliana chromatin-remodeling protein 11 (CHR11) encodes an imitation of switch (ISWI)-like chromatin-remodeling protein abundantly expressed during female gametogenesis and embryogenesis in Arabidopsis. To determine the function of CHR11 in wild-type plants, we introduced a hairpin construct leading to the production of double-stranded RNA, which specifically degraded the endogenous CHR11 mRNA by RNA interference (RNAi). Transcription of the RNAi-inducing hairpin RNA was driven by either a constitutive cauliflower mosaic virus 35S promoter (CaMV35S) acting at most stages of the sporophytic phase or a newly identified specific promoter acting at the onset of the female gametophytic phase (pFM1). All adult trans-formants that constitutively lacked sporophytic CHR11 activity showed reduced plant height and small cotyledonary embryos with limited cell expansion. In contrast, RNAi lines in which CHR11 was specifically silenced at the onset of female gametogenesis (megagametogenesis) had normal height and embryo size but had defective female gametophytes arrested before the completion of the mitotic haploid nuclear divisions. These results show that CHR11 is essential for haploid nuclear proliferation during megagametogenesis and cell expansion during the sporophytic phase, demonstrating the functional versatility of SW12/SNF2 chromatin-remodeling factors during both generations of the plant life cycle
Yttria-stabilized zirconia/SrTiO_(3) oxide heteroepitaxial interface with symmetry discontinuity
We show that yttria-stabilized zirconia (YSZ) films deposited on structurally dissimilar SrTiO_(3)(110) substrates exhibit two-dimensional layer-by-layer growth. We observed that, up to a thickness of about 15 nm, the square (001) basal plane of the cubic YSZ grows epitaxially on the rectangular (110) crystallographic plane of SrTiO3 substrates, with [110]YSZ(001)//[001]SrTiO_(3)(110) epitaxial relationship. Thus, the heterointerface presents symmetry discontinuity between the YSZ(001) film and the lower surface symmetry SrTiO_(3)(110) substrate. Beyond this specific case, we envisage similar approaches to develop other innovative oxide interfaces showing similar crystal symmetry discontinuities
Evaluación Estructural Mediante Ultrasonidos del Efecto del Espesor de la Junta de Mortero en Muros de Fábrica de Ladrillo Cerámino Sometidos a Esfuerzo de Compresión hasta su Rotura.
En este trabajo se analiza la influencia del espesor de la junta de mortero en el comportamiento estructural de probetas de fábrica de ladrillo cerámico bajo esfuerzos de compresión uniaxial. El ensayo de compresión reproduce la forma habitual de trabajo de estas estructuras. Se han ensayado nueve muros y nueve pilares, combinando tres espesores de junta de mortero, sometidos a carga de compresión hasta rotura. Con el fin de evaluar el progresivo agrietamiento del material durante el proceso de carga, se han realizado medidas con ultrasonidos. Además se han realizado medidas con extensómetros y esclerómetro para contrastar la validez de las medidas de ultrasonidos. Los resultados obtenidos muestran que existe una correlación entre los valores de la fuerza de compresión que soportan las probetas y el tamaño del espesor de la junta: a menor espesor de junta mayor carga de rotura. Del estudio también se desprende que esta relación es más clara en los muros que en los pilares, ya que la esbeltez de los muros es mayor y aparecen efectos de pandeo. La medida con ultrasonidos muestra una buena correlación con las medidas extenso métricas y permite una eficaz detección del agrietamiento interior del material durante el proceso de rotura
Tropical Grass Growth Functions Modeling by Using Nonlinear Mixed Models
Nonlinear Growth curves are used for modeling plant physiological variables. These models are preferable because the polynomial coefficients of the equations have a biological significance. The response variables of the curves occurs commonly with repeated measurements over time and measurements are on different environments. The traditional statistical analysis does not include a repeated measures approach, which can lead to improper estimation of the error terms. It is important to study the growth of tropical grass (Da Silva and Carvalho 2005)
- …