New dipeptides containing thiazolidine-4-carboxylic acid derivatives: Synthesis and characterization using NMR techniques and X-ray data

New dipeptides, structural analogues of known immunomodulating agents, were prepared by stereospecific condensation between 2-substituted thiazolidine-4-carboxylate esters with N-substituted L-proline or L- thiaproline. The structure of these compounds has been elucidated by combination of NMR methods and X-ray analysis. In addition, NMR measurements on dipeptides indicated the presence of S-cis and S-trans conformers around the amide bonds

Alternative low-cost adsorbent for water and wastewater decontamination derived from eggshellwaste: an overview

As the current global trend towards more stringent environmental standards, technical applicability and cost-effectiveness became key factors in the selection of adsorbents for water and wastewater treatment. Recently, various low-cost adsorbents derived from agricultural waste, industrial by-products or natural materials, have been intensively investigated. In this respect, the eggshells from egg-breaking operations constitute significant waste disposal problems for the food industry, so the development of value-added by-products from this waste is to be welcomed. The egg processing industry is very competitive, with low profit margins due to global competition and cheap imports. Additionally, the costs associated with the egg shell disposal (mainly on landfill sites) are significant, and expected to continue increasing as landfill taxes increase. The aim of the present review is to provide an overview on the development of low-cost adsorbents derived from eggshell by-products

Synthesis of an ordered mesoporous carbon with graphitic characteristics and its application for dye adsorption

An ordered mesoporous carbon (OMC) was prepared by a chemical vapor deposition technique using liquid petroleum gas (LPG) as the carbon source. During synthesis, LPG was effectively adsorbed in the ordered mesopores of SBA-15 silica and converted to a graphitic carbon at 800 °C. X-ray diffraction and nitrogen adsorption/desorption data and high-resolution transmission electron microscopy (HRTEM) of the OMC confirmed its ordered mesoporous structure. The OMC was utilized as an adsorbent in the removal of dyes from aqueous solution. A commercial powder activated carbon (AC) was also investigated to obtain comparative data. The efficiency of the OMC for dye adsorption was tested using acidic dye acid orange 8 (AO8) and basic dyes methylene blue (MB) and rhodamine B (RB). The results show that adsorption was affected by the molecular size of the dye, the textural properties of carbon adsorbent and surface-dye interactions. The adsorption capacities of the OMC for acid orange 8 (AO8), methylene blue (MB) and rhodamine B (RB) were determined to be 222, 833, and 233 mg/g, respectively. The adsorption capacities of the AC for AO8, MB, and RB were determined to be 141, 313, and 185 mg/ g, respectively. The OMC demonstrated to be an excellent adsorbent for the removal of MB from wastewater.Web of Scienc

Novel magnetite nanoparticles coated with waste sourced bio- based substances as sustainable and renewable adsorbing materials

This study examines the possibility of using bio-based product isolated from urban solid wastes as a material for environmental technological applications. To this end, Fe3O4 nanoparticles coated with different amounts of soluble bio-based products (SBO) were synthesized as low-cost nanoadsorbent for the removal of pollutants in wastewater. Particles of 10 nm diameter with Fe3O4 core and SBO shell were obtained. The concentration of SBO employed in the synthesis had no effect on the size and structure of the NPs, but ruled the pHPZC and aggregation of the nanoparticles in water. The cationic dye crystal violet (CV) was used as a model pollutant to test the adsorption capacity of the nanoparticles. The results indicated that both the medium pH and NP dosage were significant parameters to enhance the removal of CV. The results contribute to the studies which show how wastes can become a source of revenue through the industrial exploitation of their chemical value.Fil: Magnacca, Giuliana. Università di Torino; ItaliaFil: Allera, Alex. Università di Torino; ItaliaFil: Montoneri, Enzo. Università di Torino; ItaliaFil: Celi, Luisella. Università di Torino; ItaliaFil: Benito, Damián Ezequiel. Universidad Nacional de La Plata. Laboratorio de Investigación y Desarrollo de Métodos Analíticos; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; ArgentinaFil: Gagliardi, Leonardo Gabriel. Universidad Nacional de La Plata. Laboratorio de Investigación y Desarrollo de Métodos Analíticos; ArgentinaFil: Martire, Daniel Osvaldo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico la Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; ArgentinaFil: Gonzalez, Monica Cristina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico la Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; ArgentinaFil: Carlos, Luciano. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico la Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; Argentin

Computational Identification and Analysis of the Key Biosorbent Characteristics for the Biosorption Process of Reactive Black 5 onto Fungal Biomass

The performances of nine biosorbents derived from dead fungal biomass were investigated for their ability to remove Reactive Black 5 from aqueous solution. The biosorption data for removal of Reactive Black 5 were readily modeled using the Langmuir adsorption isotherm. Kinetic analysis based on both pseudo-second-order and Weber-Morris models indicated intraparticle diffusion was the rate limiting step for biosorption of Reactive Black 5 on to the biosorbents. Sorption capacities of the biosorbents were not correlated with the initial biosorption rates. Sensitivity analysis of the factors affecting biosorption examined by an artificial neural network model showed that pH was the most important parameter, explaining 22%, followed by nitrogen content of biosorbents (16%), initial dye concentration (15%) and carbon content of biosorbents (10%). The biosorption capacities were not proportional to surface areas of the sorbents, but were instead influenced by their chemical element composition. The main functional groups contributing to dye sorption were amine, carboxylic, and alcohol moieties. The data further suggest that differences in carbon and nitrogen contents of biosorbents may be used as a selection index for identifying effective biosorbents from dead fungal biomass

Biological decolorization of xanthene dyes by anaerobic granular biomass

Biodegradation of a xanthene dyes was investigated for the first time using anaerobic granular sludge. On a first screening, biomass was able to decolorize, at different extents, six azo dye solutions: acid orange 7, direct black 19, direct blue 71, mordant yellow 10, reactive red 2 and reactive red 120 and two xanthene dyes—Erythrosine B and Eosin Y. Biomass concentration, type of electron donor, induction of biomass with dye and mediation with activated carbon (AC) were variables studied for Erythrosine B (Ery) as model dye. Maximum color removal efficiency was achieved with 4.71 g VSS L−1, while the process rates were independent of the biomass concentration above 1.89 g VSS L−1. No considerable effects were observed when different substrates were used as electron donors (VFA, glucose or lactose). Addition of Ery in the incubation period of biomass led to a fivefold increase of the decolorization rate. The rate of Ery decolorization almost duplicated in the presence of commercial AC (0.1 g L−1 AC0). Using different modified AC samples (from the treatment of AC0), a threefold higher rate was obtained with the most basic one, \textAC\textH2ACH2, as compared with non-mediated reaction. Higher rates were obtained at pH 6.0. Chemical reduction using Na2S confirmed the recalcitrant nature of this dye. The results attest that decolorization of Ery is essentially due to enzymatic and adsorption phenomena.This work was supported by the PTDC/AMB/69335/2006 project grants (Fundacao para a Ciencia e Technologia, FCT, Portugal), BRAIN project (ID 6681, European Social Found and Romanian Government and the grant of the Romanian National Authority for Scientific Research, CNCS-UEFISCDI, project number PN-II-ID-PCE-2011-3-0559, Contract 265/2011

A review on development and application of plant-based bioflocculants and grafted bioflocculants

Flocculation is extensively employed for clarification through sedimentation. Application of eco-friendly plant-based bioflocculants in wastewater treatment has attracted significant attention lately with high removal capability in terms of solids, turbidity, color, and dye. However, moderate flocculating property and short shelf life restrict their development. To enhance the flocculating ability, natural polysaccharides derived from plants are chemically modified by inclusion of synthetic, nonbiodegradable monomers (e.g., acrylamide) onto their backbone to produce grafted bioflocculants. This review is aimed to provide an overview of the development and flocculating efficiencies of plant-based bioflocculants and grafted bioflocculants for the first time. Furthermore, the processing methods, flocculation mechanism, and the current challenges are discussed. All the reported studies about plant-derived bioflocculants are conducted under lab-scale conditions in wastewater treatment. Hence, the possibility to apply natural bioflocculants in food and beverage, mineral, paper and pulp, and oleo-chemical and biodiesel industries is discussed and evaluated