10 research outputs found
Seismic retrofitting of RC frames with RC infilling
The effectiveness of seismic retrofitting of multi-storey multi-bay RC-frame buildings, by converting selected bays into new walls through infilling with RC, was studied experimentally at the ELSA facility at JRC, Ispra, and the results are reported here. The full-scale model tested with the pseudo-dynamic method consisted of two parallel frames, linked through 0.15m slabs, having three bays each (8.5m long), with the central bay (2.5m) infilled with RC wall, and being four storeys tall (12m). The frames were designed and detailed for gravity loads only and are typical of similar frames built in Cyprus in the 1970's. Different connection details and reinforcement percentages for the two infilled frames were used in order to study the effects of these parameters. The results of the pseudo-dynamic and cyclic testing performed are presented and conclusions are drawn
Evaluation of seismic demand for substandard reinforced concrete structures
Background: Reinforced Concrete (RC) buildings with no seismic design exhibit degrading behaviour under severe seismic loading due to non-ductile brittle failure modes. The seismic performance of such substandard structures can be predicted using existing capacity demand diagram methods through the idealization of the non-linear capacity curve of the degrading system, and its comparison with a reduced earthquake demand spectrum. Objective: Modern non-linear static methods for derivation of capacity curves incorporate idealization assumptions that are too simplistic and do not apply for sub-standard buildings. The conventional idealisation procedures cannot maintain the true strength degradation behaviour of such structures in the post-peak part, and thus may lead to significant errors in seismic performance prediction especially in the cases of brittle failure modes dominating the response. Method: In order to increase the accuracy of the prediction, an alternative idealisation procedure using equivalent elastic perfectly plastic systems is proposed herein that can be used in conjunction with any capacity demand diagram method. Results: Moreover, the performance of this improved equivalent linearization procedure in predicting the response of an RC frame is assessed herein. Conclusion: This improved idealization procedure has been proven to reduce the error in the seismic performance prediction as compared to seismic shaking table test results [1] and will be further investigated probabilistically herein
Recommended from our members
Nonlinear dynamic analysis of masonry buildings and definition of seismic damage states
A large part of the building stock in seismic-prone areas worldwide are masonry structures that have been designed without seismic design considerations. Proper seismic assessment of such structures is quite a challenge, particularly so if their response well into the inelastic range, up to local or global failure, has to be predicted, as typically required in fragility analysis. A critical issue in this respect is the absence of rigid diaphragm action (due to the presence of relatively flexible floors), which renders particularly cumbersome the application of popular and convenient nonlinear analysis methods like the static pushover analysis. These issues are addressed in this paper that focusses on a masonry building representative of Southern European practice, which is analysed in both its pristine condition and after applying retrofitting schemes typical of those implemented in pre-earthquake strengthening programmes. Nonlinear behaviour is evaluated using dynamic response-history analysis, which is found to be more effective and even easier to apply in this type of building wherein critical modes are of a local nature, due to the absence of diaphragm action. Fragility curves are then derived for both the initial and the strengthened building, exploring alternative definitions of seismic damage states, including some proposals originating from recent international research programmes
Mathematical micromodeling of infilled frames:state of the art
The in-plane contribution of infill walls on the structural response of infilled frame structures is an important problem and many research initiatives, via experimental and numerical methods, have been conducted in order to investigate it thoroughly. As a result, the need to consider these research findings on the structural performance has been acknowledged in the latest generation of structural design codes. However, due to the uncertainties concerning the behavior of masonry at the material and structural level, these elements are usually ignored during practical structural analysis and design. They are overtly considered only when there is suspicion that their influence is detrimental to the overall structural response or to the behavior of individual load bearing elements or when it is necessary to justify an improvement in the overall load-carrying capacity or structural performance in general. In this paper, a thorough overview of the different micromodels proposed for the analysis of infilled frames is presented, and the advantages and disadvantages of each micromodel are pointed out (this paper follows our recent review paper on the state-of-the-art of the mathematical macromodeling of infilled frames, thus completing the overview of both macro- and micro- models in the field). Practical recommendations for the implementation of the different models are also presented