2,259 research outputs found
Investigation on the sampling size optimisation in gear tooth surface measurement using a Co-ordinate Measuring Machine
Co-ordinate Measuring Machines (CMMs) are widely used in gear manufacturing industry. One of the main issues for contact inspection using a CMM is the sampling technique. In this paper the gear tooth surfaces are expressed by series of parameters and inspection error compensation and initial value optimisation method are presented. The minimum number of measurement points for 3D tooth surfaces are derived. If high precision is required, more points need to be inspected. The sampling size optimisation is obtained from the criterion equation. The surface form deviation and initial values are optimised using the minimum zone method and Genetic Algorithms. A feature based inspection system for spur/helical gears is developed and trials and simulations demonstrated the developed method is very effective and suitable
A Necessary And Sufficient Condition of Distillability with unite fidelity from Finite Copies of a Mixed State: The Most Efficient Purification Protocol
It is well known that any entangled mixed state in systems can
be purified via infinite copies of the mixed state. But can one distill a pure
maximally entangled state from finite copies of a mixed state in any bipartite
system by local operation and classical communication? This is more meaningful
in practical application. We give a necessary and sufficient condition of this
distillability. This condition can be expressed as: there exists
distillable-subspaces. According to this condition, one can judge whether a
mixed state is distillable or not easily. We also analyze some properties of
distillable-subspaces, and discuss the most efficient purification protocols.
Finally, we discuss the distillable enanglement of two-quibt system for the
case of finite copies.Comment: a revised versio
Perturbative QCD analysis of decays
We study the first observed charmless modes, the
decays, in perturbative QCD formalism. The obtained branching ratios
are larger than
from QCD factorization. The comparison of the predicted magnitudes and phases
of the different helicity amplitudes, and branching ratios with experimental
data can test the power counting rules, the evaluation of annihilation
contributions, and the mechanism of dynamical penguin enhancement in
perturbative QCD, respectively.Comment: 14 pages, 2 tables, brief disscussion on hard sacle added, version to
appear in PR
Impact of Subleading Corrections on Hadronic B Decays
We study the subleading corrections originating from the 3-parton (q\bar q g)
Fock states of final-state mesons in B decays. The corrections could give
significant contributions to decays involving an \omega or \eta^{(\prime)} in
the final states. Our results indicate the similarity of \omega K and \omega
\pi^- rates, of order 5\times 10^{-6}, consistent with the recent measurements.
We obtain a_2(B\to J/\psi K)\approx 0.27+0.05i, in good agreement with data.
Without resorting to the unknown singlet annihilation effects, 3-parton Fock
state contributions can enhance the branching ratios of K\eta' to the level
above 50\times 10^{-6}.Comment: 5 pages, 5 figures, revtex4; some typos corrected, a new figure and a
reference added, more explanations for the calculation provided, to appear in
Phys. Rev.
B_c meson rare decays in the light-cone quark model
We investigate the rare decays
and in the framework of the
light-cone quark model (LCQM). The transition form factors are calculated in
the space-like region and then analytically continued to the time-like region
via exponential parametrization. The branching ratios and longitudinal lepton
polarization asymmetries (LPAs) for the two decays are given and compared with
each other. The results are helpful to investigating the structure of
meson and to testing the unitarity of CKM quark mixing matrix. All these
results can be tested in the future experiments at the LHC.Comment: 9 pages, 11 figures, version accepted for publication in EPJ
Study of f_0(980) and f_0(1500) from B_s \to f_0(980)\pi, f_0(1500)\pi Decays
In this paper, we analyze the scalar mesons and from
the decays within Perturbative
QCD approach. From the leading order calculations, we find that (a) in the
allowed mixing angle ranges, the branching ratio of is about , which is smaller than
that of (the difference is a few times even one
order); (b) the decay is better to distinguish
between the lowest lying state or the first excited state for ,
because the branching ratios for two scenarios have about one-order difference
in most of the mixing angle ranges; and (c) the direct CP asymmetries of for two scenarios also exists great difference. In
scenario II, the variation range of the value according to the mixing angle is very small, except for
the values corresponding to the mixing angles being near or
, while the variation range of in scenario I is very large. Compared with the future data for
the decay , it is ease to determine the nature
of the scalar meson .Comment: 16 pages, 3 figures, Revte
Thermal and electrical study on ac light-emitting diode with quantum wells under various cooling rate
Paper presented to the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Florida, 14-16 July 2014.The conventional Shockley equation is inappropriate to describe the relationship between the current density and the forward voltage drop across the p-n junction in LED (light-emitting diode) with multiple quantum wells. In the present study, a semi-empirical model based on the existing experimental measurements is proposed to evaluate the forwards voltage drop under given current density and temperature. The numerical model then is employed to investigate the electrical and temperature fields on ac LED with multiple quantum wells under various cooling rate. The numerical results reveal that the temperature of the LED oscillates under ac electrical potential. The temperature increases due to the heat generation arising from the electrical current across the p-n junction when the electrical potential exceeds the threshold voltage. Otherwise, there is no electrical current and thus the temperature decreases due to the effect of the cooling device. Both light-emitting power and maximum temperature increase as expected when the applied ac electrical potential increases. Fortunately, the temperature of the LED can be efficiently controlled by increasing the cooling rate. Although increasing the cooling rate would decrease the light-emitting power, the influence is not significant.cf201
A Gaussian process and image registration based stitching method for high dynamic range measurement of precision surfaces
Optical instruments are widely used for precision surface measurement. However, the dynamic range of optical instruments, in terms of measurement area and resolution, is limited by the characteristics of the imaging and the detection systems. If a large area with a high resolution is required, multiple measurements need to be conducted and the resulting datasets needs to be stitched together. Traditional stitching methods use six degrees of freedom for the registration of the overlapped regions, which can result in high computational complexity. Moreover, measurement error increases with increasing measurement data. In this paper, a stitching method, based on a Gaussian process, image registration and edge intensity data fusion, is presented. Firstly, the stitched datasets are modelled by using a Gaussian process so as to determine the mean of each stitched tile. Secondly, the datasets are projected to a base plane. In this way, the three-dimensional datasets are transformed to two-dimensional (2D) images. The images are registered by using an (x, y) translation to simplify the complexity. By using a high precision linear stage that is integral to the measurement instrument, the rotational error becomes insignificant and the cumulative rotational error can be eliminated. The translational error can be compensated by the image registration process. The z direction registration is performed by a least-squares error algorithm and the (x, y, z) translational information is determined. Finally, the overlapped regions of the measurement datasets are fused together by the edge intensity data fusion method. As a result, a large measurement area with a high resolution is obtained. A simulated and an actual measurement with a coherence scanning interferometer have been conducted to verify the proposed method. The stitching result shows that the proposed method is technically feasible for large area surface measurement
Identification of differentially expressed genes induced by Bamboo mosaic virus infection in Nicotiana benthamiana by cDNA-amplified fragment length polymorphism
Background: The genes of plants can be up- or down-regulated during viral infection to influence the replication of viruses. Identification of these differentially expressed genes could shed light on the defense systems employed by plants and the mechanisms involved in the adaption of viruses to plant cells. Differential gene expression in Nicotiana benthamiana plants in response to infection with Bamboo mosaic virus (BaMV) was revealed using cDNA-amplified fragment length polymorphism (AFLP). Results: Following inoculation with BaMV, N. benthamiana displayed differential gene expression in response to the infection. Isolation, cloning, and sequencing analysis using cDNA-AFLP furnished 90 cDNA fragments with eight pairs of selective primers. Fifteen randomly selected genes were used for a combined virus-induced gene silencing (VIGS) knockdown experiment, using BaMV infection to investigate the roles played by these genes during viral infection, specifically addressing the means by which these genes influence the accumulation of BaMV protein. Nine of the 15 genes showed either a positive or a negative influence on the accumulation of BaMV protein. Six knockdown plants showed an increase in the accumulation of BaMV, suggesting that they played a role in the resistance to viral infection, while three plants showed a reduction in coat protein, indicating a positive influence on the accumulation of BaMV in plants. An interesting observation was that eight of the nine plants showing an increase in BaMV coat protein were associated with cell rescue, defense, death, aging, signal transduction, and energy production. Conclusions: This study reports an efficient and straightforward method for the identification of host genes involved in viral infection. We succeeded in establishing a cDNA-AFLP system to help track changes in gene expression patterns in N. benthamiana plants when infected with BaMV. The combination of both DNA-AFLP and VIGS methodologies made it possible to screen a large number of genes and identify those associated with infections of plant viruses. In this report, 9 of the 15 analyzed genes exhibited either a positive or a negative influence on the accumulation of BaMV in N. benthamiana plants
- …