44 research outputs found
Speckle statistics in adaptive optics images at visible wavelengths
Residual speckles in adaptive optics (AO) images represent a well-known
limitation on the achievement of the contrast needed for faint source
detection. Speckles in AO imagery can be the result of either residual
atmospheric aberrations, not corrected by the AO, or slowly evolving
aberrations induced by the optical system. We take advantage of the high
temporal cadence (1 ms) of the data acquired by the System for Coronagraphy
with High-order Adaptive Optics from R to K bands-VIS forerunner experiment at
the Large Binocular Telescope to characterize the AO residual speckles at
visible wavelengths. An accurate knowledge of the speckle pattern and its
dynamics is of paramount importance for the application of methods aimed at
their mitigation. By means of both an automatic identification software and
information theory, we study the main statistical properties of AO residuals
and their dynamics. We therefore provide a speckle characterization that can be
incorporated into numerical simulations to increase their realism and to
optimize the performances of both real-time and postprocessing techniques aimed
at the reduction of the speckle noise
The V-SHARK high contrast imager at LBT
In the framework of the SHARK project the visible channel is a novel instrument synergic to the NIR channel and exploiting the performances of the LBT XAO at visible wavelengths. The status of the project is presented together with the design study of this innovative instrument optimized for high contrast imaging by means of high frame rate. Its expected results will be presented comparing the simulations with the real data of the "Forerunner" experiment taken at 630nm
Calibration of the IXPE instrument
IXPE scientific payload comprises of three telescopes, each composed of a mirror and a photoelectric polarimeter based on the Gas Pixel Detector design. The three focal plane detectors, together with the unit which interfaces them to the spacecraft, are named IXPE Instrument and they will be built and calibrated in Italy; in this proceeding, we will present how IXPE Instrument will be calibrated, both on-ground and in-flight. The Instrument Calibration Equipment is being finalized at INAF-IAPS in Rome (Italy) to produce both polarized and unpolarized radiation, with a precise knowledge of direction, position, energy and polarization state of the incident beam. In flight, a set of four calibration sources based on radioactive material and mounted on a filter and calibration wheel will allow for the periodic calibration of all of the three IXPE focal plane detectors independently. A highly polarized source and an unpolarized one will be used to monitor the response to polarization; the remaining two will be used to calibrate the gain through the entire lifetime of the mission
The IXPE Instrument Calibration Equipment
The Imaging X-ray Polarimetry Explorer is a mission dedicated to the
measurement of X-ray polarization from tens of astrophysical sources belonging
to different classes. Expected to be launched at the end of 2021, the payload
comprises three mirrors and three focal plane imaging polarimeters, the latter
being designed and built in Italy. While calibration is always an essential
phase in the development of high-energy space missions, for IXPE it has been
particularly extensive both to calibrate the response to polarization, which is
peculiar to IXPE, and to achieve a statistical uncertainty below the expected
sensitivity. In this paper we present the calibration equipment that was
designed and built at INAF-IAPS in Rome, Italy, for the calibration of the
polarization-sensitive focal plane detectors on-board IXPE. Equipment includes
calibration sources, both polarized and unpolarized, stages to align and move
the beam, test detectors and their mechanical assembly. While all these
equipments were designed to fit the specific needs of the IXPE Instrument
calibration, their versatility could also be used in the future for other
projects
SHARK-NIR: from K-band to a key instrument, a status update
SHARK-NIR channel is one of the two coronagraphic instruments proposed for the Large Binocular Telescope, in the framework of the call for second generation instruments, issued in 2014. Together with the SHARK-VIS channel, it will offer a few observing modes (direct imaging, coronagraphic imaging and coronagraphic low resolution spectroscopy) covering a wide wavelength domain, going from 0.5μm to 1.7μm. Initially proposed as an instrument covering also the K-band, the current design foresees a camera working from Y to H bands, exploiting in this way the synergy with other LBT instruments such as LBTI, which is actually covering wavelengths greater than L' band, and it will be soon upgraded to work also in K band. SHARK-NIR has been undergoing the conceptual design review at the end of 2015 and it has been approved to proceed to the final design phase, receiving the green light for successive construction and installation at LBT. The current design is significantly more flexible than the previous one, having an additional intermediate pupil plane that will allow the usage of coronagraphic techniques very efficient in term of contrast and vicinity to the star, increasing the instrument coronagraphic performance. The latter is necessary to properly exploit the search of giant exo-planets, which is the main science case and the driver for the technical choices of SHARK-NIR. We also emphasize that the LBT AO SOUL upgrade will further improve the AO performance, making possible to extend the exo-planet search to target fainter than normally achieved by other 8-m class telescopes, and opening in this way to other very interesting scientific scenarios, such as the characterization of AGN and Quasars (normally too faint to be observed) and increasing considerably the sample of disks and jets to be studied. Finally, we emphasize that SHARK-NIR will offer XAO direct imaging capability on a FoV of about 15"x15", and a simple coronagraphic spectroscopic mode offering spectral resolution ranging from few hundreds to few thousands. This article presents the current instrument design, together with the milestones for its installation at LBT. <P /
Laser Guide Stars for Optical Free-Space Communications
The German Aerospace Center (DLR) and the European Southern Observatory (ESO) performed a measurement campaign together in April and July 2016 at Teide-Observatory (Tenerife), with the support of the European Space Agency (ESA), to investigate the use of laser guide stars (LGS) in ground to space optical communications.
Atmospheric turbulence causes strong signal fluctuations in the uplink, due to scintillation and beam wander. In space communications, the use of the downlink channel as reference for pointing and for pre-distortion adaptive optics is limited by the size of the isokinetic and isoplanatic angle in relation to the required point-ahead angle. Pointing and phase errors due to the decorrelation between downward and upward beam due to the point-ahead angle may have a severe impact on the required transmit power and the stability of the communications link.
LGSs provide a self-tailored reference to any optical ground-to-space link, independently of turbulence conditions and required point-ahead angle. In photon-starved links, typically in deep-space scenarios, LGSs allow dedicating all downlink received signal to communications purposes, increasing the available link margin.
The scope of the joint DLR-ESO measurement campaign was, first, to measure the absolute value of the beam wander (uplink-tilt) using a LGS, taking a natural star as a reference, and, second, to characterize the decrease of correlation between uplink-tilt and downlink-tilt with respect to the angular separation between both sources. This paper describes the experiments performed during the measurement campaigns, providing an overview of the measured data and the first outcomes of the data post-processing
Recommended from our members
Laser Pointing Camera: a valuable tool for the LGS-AO operations
Every observatory using LGS-AO routinely has the experience of the long time needed to bring and acquire the laser guide star in the wavefront sensor field of view. This is mostly due to the difficulty of creating LGS pointing models, because of the opto-mechanical flexures and hysteresis in the launch and receiver telescope structures.The launch telescopes are normally sitting on the mechanical structure of the larger receiver telescope. The LGS acquisition time is even longer in case of multiple LGS systems. In this framework the optimization of the LGS systems absolute pointing accuracy is relevant to boost the time efficiency of both science and technical observations.In this paper we describe the design and functionalities of the Laser Pointing Camera (LPC)3, developed at OAR for the 4LGSF of the ESO Adaptive Optics Facility. The LPC allows to have a fast pointing of the multiple LGS on the AO WFS during the initial acquisition phase of the telescope preset, thus reducing considerably the overheads currently experienced in most LGS-AO systems in operation.By recognizing via astrometric software the field stars as well as the multiple LGS, LPC is insensitive to flexures of the laser launch telescope or of the receiver telescope opto-mechanics. Moreover, LPC gives regularly the photometry and fwhm of the LGS, as well as the scattering of the uplink beams at the height of 10-15km, thus monitoring the presence and evolution of cirrus clouds. We present the first Commissioning results of the Laser Pointing Camera, obtained at the ESO VLT during the 4LGSF first Laser Guide Star Unit Commissioning, and will discuss its possible extension for the ELT operations