Multi-stage calibration of the simulation model of a school building through short-term monitoring

The increasing attention on the improvement of new and existing buildings' performance is emphasizing the importance of the reliability of the simulation models in predicting the complexity of the building behaviour and, consequently, in some advanced applications of building simulation, such as the optimization of the choice of different Energy Efficiency Measures (EEMs) or the adoption of model predictive control strategies. The reliability of the energy model does not depend only on the quality and details of the model itself, but also on the uncertainty related to many input values, such as the physical properties of materials and components, the information on the building management and occupation, and the boundary conditions considered for the simulation. Especially for the existing buildings, this kind of data is often missing or characterized by high uncertainty, and only very simplified behavioural models of occupancy are available. This could compromise the optimization process and undermine the potential of building simulation. In this context, the calibration of the simulation model by means of on-site monitoring is of crucial importance to increase the reliability of the predictions, and to take better decisions, even though this process can be time consuming. This work presents a multi-stage methodology to calibrate the building energy simulation by means of low-cost monitoring and short-term measurements. This approach is applied to a Primary School in the North-East of Italy, which has been monitored from December 2012 to April 2014. Four monitoring periods have been selected to calibrate different sets of variables at a time, while the validation has been carried out on two different periods. The results show that even if less than 8 weeks have been considered in the proposed calibration approach, the maximum error in the estimation of the temperature is less than ±0.5 in 77.3% of the timesteps in the validation period

The anomalous warming of summer 2003 in the surface layer of the Central Ligurian Sea (Western Mediterranean)

"Meteorological and sea temperature data from the ODAS Italia 1 buoy (Ligurian Sea, Western Mediterranean) are used to study the anomalous warming of summer 2003 at sea. The event was related to the record heat wave that interested much of Europe from June to September of that year. The data show that the anomalous warming was prevalently confined to within a few meters below the sea surface. On the contrary, the temperatures in the underlying layers were lower than usual. The limited vertical propagation of heat is ascribed to the high temperature difference that arose between the surface and the deeper layers due to protracted calm weather conditions. The degree of penetration of heat deduced from the observations is consistent with that computed on the basis of an energetic argument, wherein the wind constitutes the sole supply of kinetic energy, while the heating is viewed as the source of potential energy that must be ""subtracted"" by mixing. The results support the hypothesis that the scanty energy from the wind is mainly responsible for the development of the temperature anomaly at the sea surface.

A multi-stages approach to the calibration of a school building's simulation model

The calibration process is an important step to improve the reliability of the simulation model and to reduce the differences between simulated and measured building energy performance. This paper presents a methodology to calibrate a building simulation model by means of low-cost monitoring set-up and short term measurements. The proposed method can be defined as a multi-stage calibration. It is based on the assumption that input data affect the simulation results differently according to the considered period of the year. It seems thus possible to calibrate different sets of parameters in different reference periods, with the advantage of using shorter recording times when the calibration periods have been consistently selected

New data on Cu‑exchanged phillipsite: a multi‑methodological study

The cation exchange capacity of a natural phillipsite-rich sample from the Neapolitan Yellow Tuff, Southern Italy (treated in order to obtain a 95 wt% zeolite-rich sample composed mainly of phillipsite and minor chabazite) for Cu was evaluated using the batch exchange method. The sample had previously been exchanged into its monocationic form (Na), and then used for the equilibrium studies of the exchange reaction 2Na(+) a double dagger dagger Cu2+. Reversibility ion exchange tests were performed. The isotherm displays an evident hysteresis loop. Interestingly, the final Cu-exchanged polycrystalline material was green-bluish. Natural, Na- and Cu-exchanged forms were analyzed by X-ray powder diffraction, and the Cu-phillipsite was also investigated by transmission electron microscopy (TEM). Structure refinement of Cu-phillipsite was performed by the Rietveld method using synchrotron data, and it indicates a small, but significant, fraction of Cu sharing with Na two-three independent extra-framework sites. The TEM experiment shows sub-spherical nano-clusters of crystalline species (with average size of 5 nm) lying on the surfaces of zeolite crystals or dispersed in the amorphous fraction, with electron diffraction patterns corresponding to those of CuO (tenorite-like structure) and Cu(OH)(2) (spertiniite-like structure). X-ray and TEM investigations show that Cu is mainly concentrated in different species (crystalline or amorphous) within the sample, not only in phillipsite. The experimental findings based on X-ray and TEM investigations, along with the hysteresis loop of the ion exchange tests, are discussed and some general considerations about the mechanisms of exchange reactions involving divalent cations with high hydration energy are provided

The situational version of the brief COPE: Dimensionality and relationships with goal-related variables

This study is aimed at investigating the dimensionality of the situational version of the Brief COPE, a questionnaire that is frequently used to assess a broad range of coping responses to specific difficulties, by comparing five different factor models highlighted in previous studies. It also aimed at exploring the relationships among coping responses, personal goal commitment and progress. The study involved 606 adults (male = 289) ranging in age from 19 to 71. Using confirmatory factor analysis, we compared five models and assessed relationships of coping responses with goal commitment and progress. The results confirmed the theoretical factor structure of the situational Brief COPE. All the 14 dimensions showed acceptable reliability and relationships with goal commitment and progress, attesting the reliability and usefulness of this measure to evaluate coping responses to specific events

Upper layer current variability in the Central Ligurian Sea

Abstract. Long-time series of surface currents and meteorological parameters were analysed to estimate the variability of the upper layer circulation and the response to the local winds. Current meter data were collected by an upward-looking RDI Sentinel 300 kHz ADCP deployed in the Central Ligurian Sea (43°47.77' N; 9°02.85' E) near the meteo-oceanographic buoy ODAS Italia 1 for more than eight months, from 13th of September 2003 to 24th of May 2004. The ADCP sampled the upper 50 m of water column at 8 m vertical resolution and 1 h time interval; surface marine and atmospheric hourly averaged data were provided by the buoy. Currents in the sampled layer were mainly barotropic, directed North-West in accordance with the general circulation of the area, and had a mean velocity of about 18 cm/s and hourly mean peaks up to 80 cm/s. Most of the observed variability in the upper thermocline was determined by inertial currents and mesoscale activity due to the presence of the Ligurian Front. Local wind had a minor role in the near-surface circulation but induced internal waves propagating downward in the water column

Use of Sawing Waste from Zeolitic Tuffs in the Manufacture of Ceramics

This paper investigates the thermal transformation of powders of volcanic tuffs that are used as building stones and aims at thermally transforming them into ceramics. The following positive indications concerning this thermal transformation were found: (1) the structural evolution which brings products similar to traditional ceramics, (2) the good ability to give rise to dense and compact final products, and (3) the good mechanical properties and the lovely appearance of the final products. Nevertheless, the high values of linear shrinkages recorded in this work seem to strongly hinder the thermal transformation of this powder-like waste into ceramics. However, mixing this by-product with other powder-like waste exhibiting higher-dimensional stability, such as those deriving from sawing of granites, appears proper

Insight into phenotypic and genotypic differences between vaginal lactobacillus crispatus bc5 and lactobacillus gasseri bc12 to unravel nutritional and stress factors influencing their metabolic activity

The vaginal microbiota, normally characterized by lactobacilli presence, is crucial for vaginal health. Members belonging to L. crispatus and L. gasseri species exert crucial protective functions against pathogens, although a total comprehension of factors that influence their dominance in healthy women is still lacking. Here we investigated the complete genome sequence and comprehensive phenotypic profile of L. crispatus strain BC5 and L. gasseri strain BC12, two vaginal strains featured by anti-bacterial and anti-viral activities. Phenotype microarray (PM) results revealed an improved capacity of BC5 to utilize different carbon sources as compared to BC12, although some specific carbon sources that can be associated to the human diet were only metabolized by BC12, i.e. uridine, amygdalin, tagatose. Additionally, the two strains were mostly distinct in the capacity to utilize the nitrogen sources under analysis. On the other hand, BC12 showed tolerance/resistance towards twice the number of stressors (i.e. antibiotics, toxic metals etc.) with respect to BC5. The divergent phenotypes observed in PM were supported by the identification in either BC5 or BC12 of specific genetic determinants that were found to be part of the core genome of each species. The PM results in combination with comparative genome data provide insights into the possible environmental factors and genetic traits supporting the predominance of either L. crispatus BC5 or L. gasseri BC12 in the vaginal niche, giving also indications for metabolic predictions at the species level

A comparison of acute phase proteins and traditional risk factors as markers of combined plaque and intima-media thickness and plaque density in carotid and femoral arteries

AbstractObjectives: to test the hypothesis that some acute phase proteins may be better independent predictors of objective measures of arterial wall impairment than traditional risk factors. Design: cross-sectional study. Materials and Methods: C-reactive protein (CRP), fibrinogen, C3 complement and traditional risk factors were measured in 288 men aged 55-64 years, randomly chosen from the local registry lists. By ultrasound assessment of the bifurcations of carotid and femoral arteries, maximum combined plaque/intima-media thickness (CPIMTmax) and mean plaque density (MPD, in a grey scale from 0 to 255) were also measured. Results: in multivariate analysis only traditional risk factors remained associated with the overall CPIMTmax: smoking (r = 0.35, p < 0.0001), cholesterol (r = 0.23, p = 0.0001), age (r = 0.22, p = 0.0002), glucose (r = 0.18, p = 0.002) and systolic blood pressure (r = 0.13, p = 0.02). However, with regard to carotid disease only, fibrinogen was the strongest covariate of CPIMT (r = 0.18, p = 0.002). The overall MPD was independently associated with CRP (r = 0.25, p = 0.0008), physical activity (r = 0.19, p = 0.009), triglycerides (r = −0.18, p = 0.02) and body mass index (r = 0.15, p = 0.04). CRP was mainly associated with femoral MPD, while triglycerides were the major (inverse) covariate of carotid MPD. Conclusions: traditional risk factors are the main determinants of CPIMTmax, although fibrinogen seems to play a role in carotids. CRP was associated with high density femoral plaques. Finally, no acute phase protein was independently associated with low density, potentially vulnerable, plaques.Eur J Vasc Endovasc Surg 26, 81-87 (2003

Autoimmune encephalitis and CSF anti-glur3 antibodies in an MS patient after alemtuzumab treatment

A 45-year-old Italian woman, affected by relapsing-remitting multiple sclerosis (RR-MS) starting from 2011, started treatment with alemtuzumab in July 2016. Nine months after the second infusion, she had an immune thrombocytopenic purpura (ITP) with complete recovery after steroid treatment. Three months after the ITP, the patient presented with transient aphasia, cognitive deficits, and focal epilepsy. Serial brain magnetic resonance imaging showed a pattern compatible with encephalitis. Autoantibodies to glutamate receptor 3 peptide A and B were detected in cerebrospinal fluid and serum, in the absence of any other diagnostic cues. After three courses of intravenous immunoglobulin (0.4 mg/kg/day for 5 days, 1 month apart), followed by boosters (0.4 mg/kg/day) every 4-6 weeks, her neurological status improved and is currently comparable with that preceding the encephalitis. Autoimmune complications of the central nervous system during alemtuzumab therapy are relatively rare: only one previous case of autoimmune encephalitis following alemtuzumab treatment has been reported to date