Production of a spin-polarized, metastable He(23 S) beam for studies in atomic and surface physics

Baum G, Raith W, Steidl H. Production of a spin-polarized, metastable He(23 S) beam for studies in atomic and surface physics. Z.Phys. D. 1988;10(2-3):171-178.This beam was developed as a target for a crossed-beam electron-atom scattering experiment on the interaction of a polarized spin-1/2 electron with a polarized spin-1 atom. In the future this beam will be used in "Spin-Polarized Metastable Atom Deexcitation Spectroscopy" (SPMDS) for studying ferromagnetic surfaces without and with adsorbate layers. We use a discharge source for producing a beam of metastable helium atoms, a permanent sextupole magnet with a central stop at its exit for selecting He(2^3 S) atoms in the Zeeman substate ms=+1, a zero-field spin flipper for reversing the atomic beam polarization with respect to a magnetic guiding field, and a Stern-Gerlach magnet for analyzing the atomic polarization. At a distance of 90 cm beyond the exit of the sextupole, in the "interaction region" of an experiment, the polarized beam has a circular cross section of about 6 mm FWHM and a particle density of 1·10^7 atoms/cm^3. The reversible spin polarization was determined asP=0.90±0.02. A possible contamination of the beam with metastable singlet atoms is included within this value; the ground-state He atoms are not considered to be part of the polarized beam. An observed contamination with long-lived Rydberg atoms can easily be destroyed by applying a high electric field

Overview of JET results

Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower \u3c1 17 and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower \u3c1 17 and \u3bd 17 and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with 3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95 values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2MWm 122) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling

Study of fast-ion transport induced by fishbones on JET

The impact of fishbone oscillations onto a confined fast-ion population is simulated for a JET plasma and benchmarked against experiment quantitatively with the help of neutron rate measurements. The transient drops in volume integrated neutron emission are found to be mainly caused by the spatial redistribution of the (neutral beam injected) fast-ion population confined in the plasma rather than by fast-ion loss. The simulations yield a quadratic dependence of the neutron drop on the fishbone amplitude. It is found that the simulations are able to correctly reproduce the magnitude of the experimentally observed drop in volume integrated neutron emission to within a factor 2. Furthermore, frequency chirping is found to be important. Omitting the fishbone frequency chirp in the simulations reduces the magnitude of the neutron rate drop (and hence fast-ion redistribution) to about half its original value

Non-resonant magnetic braking on JET and TEXTOR

The non-resonant magnetic braking effect induced by a non-axisymmetric magnetic perturbation is investigated on JET and TEXTOR. The collisionality dependence of the torque induced by the n = 1, where n is the toroidal mode number, magnetic perturbation generated by the error field correction coils on JET is observed. The observed torque is located mainly in the plasma core (normalized radius