Unusual ending of the second dorsal metacarpal artery as proper palmar digital arteries

Background: The proper palmar digital arteries arise infrequently from dorsal metacarpal arteries. This work reports the second dorsal metacarpal artery unusual ending and a vascular variation related to the superficial palmar arch. Materials and methods: Fresh human upper limbs routine dissection, from a male cadaver, injected with coloured elastomeric material, immersed in 10% formalin. Results: The second dorsal metacarpal artery presented terminal branches, the index finger medial proper digital palmar artery and the middle finger lateral proper digital palmar artery. At the division point of both terminal branches, the second dorsal metacarpal artery anastomoses with a thin forth common digital palmar artery. Conclusions: The value of this knowledge about the infrequent vascular dispo­sition lies in vascularised flaps design using the second dorsal metacarpal artery. (Folia Morphol 2018; 77, 2: 393–396

Anomalies, Anomalous U(1)'s and generalized Chern-Simons terms

A detailed analysis of anomalous U(1)'s and their effective couplings is performed both in field theory and string theory. It is motivated by the possible relevance of such couplings in particle physics, as well as a potential signal distinguishing string theory from other UV options. The most general anomaly related effective action is analyzed and parameterized. It contains Stuckelberg, axionic and Chern-Simons-like couplings. It is shown that such couplings are generically non-trivial in orientifold string vacua and are not in general fixed by anomalies. A similar analysis in quantum field theories provides similar couplings. The trilinear gauge boson couplings are also calculated and their phenomenological relevance is advocated. We do not find qualitative differences between string and field theory in this sector.Comment: 52 pages, 2 eps figures, LaTeX, feynmf & youngtab packages (v2 - Minor corrections, references added

Polarized DIS in N=4 SYM: Where is spin at strong coupling?

Using the AdS/CFT correspondence, we calculate the polarized structure functions in strongly coupled N=4 supersymmetric Yang-Mills theory deformed in the infrared. We find that the flavor singlet contribution to the g_1 structure function is vanishingly small, while the flavor non-singlet contribution shows the Regge behavior at small-x with an intercept slightly less than 1. We explicitly check that the latter satisfies the moment sum rule. We discuss the `spin crisis' problem and suggest that at strong coupling the spin of a hadron entirely comes from the orbital angular momentum.Comment: 24 page

Black-hole quasinormal modes and scalar glueballs in a finite-temperature AdS/QCD model

We use the holographic AdS/QCD soft-wall model to investigate the spectrum of scalar glueballs in a finite temperature plasma. In this model, glueballs are described by a massless scalar field in an AdS_5 black hole with a dilaton soft-wall background. Using AdS/CFT prescriptions, we compute the boundary retarded Green's function. The corresponding thermal spectral function shows quasiparticle peaks at low temperatures. We also compute the quasinormal modes of the scalar field in the soft-wall black hole geometry. The temperature and momentum dependences of these modes are analyzed. The positions and widths of the peaks of the spectral function are related to the frequencies of the quasinormal modes. Our numerical results are found employing the power series method and the computation of Breit-Wigner resonances.Comment: Revision: Results unchanged. More discussions on the model and on the results. References added. 28 pages, 7 figures, 5 table

NUTRITIONAL, HYGIENIC, HEALTH AND ORGANOLEPTIC CHARACTERIZATION OF MEAT OF BOVINE BREED PIEMONTESE

The autochthonous "Piemontese" bovine breed is primarily raised for meat due to the high quality of production. The aim of this study was to investigate the microbiological, nutritional and chemical aspects of samples meat from cattle breeding "Piemontese"

The Self Model and the Conception of Biological Identity in Immunology

The self/non-self model, first proposed by F.M. Burnet, has dominated immunology for sixty years now. According to this model, any foreign element will trigger an immune reaction in an organism, whereas endogenous elements will not, in normal circumstances, induce an immune reaction. In this paper we show that the self/non-self model is no longer an appropriate explanation of experimental data in immunology, and that this inadequacy may be rooted in an excessively strong metaphysical conception of biological identity. We suggest that another hypothesis, one based on the notion of continuity, gives a better account of immune phenomena. Finally, we underscore the mapping between this metaphysical deflation from self to continuity in immunology and the philosophical debate between substantialism and empiricism about identity

Analysis of the influence of the different times of polymerization by incandescent light in composite resins by evaluation of its abrasive wear

No mercado atual a qualidade é necessária na fabricação dos produtos. No mercado odontológico, as resinas compostas são cada vez mais utilizadas para substituir materiais tradicionais, como amalgama, nas restaurações estéticas e funcionais, apresentando boa estética e funcionalidade. A composição química destes materiais é variável e os resultados das reações químicas do processo de polimerização são bastante desconhecidos. O objetivo deste trabalho era medir a resistência do desgaste abrasivo de seis resinas compostas vendidas no mercado brasileiro polimerizadas com tempos de 10, 20 e 40 segundos. O método do disco retificado modificado para aplicações em odontologia foi usado para tornar esta proposta viável. Neste banco de ensaios um disco dinâmico, revestido por porcelana, desgasta um disco estático revestido do tipo de resina que se pretende avaliar, que foi polimerizada durante um tempo pré-estabelecido. Com a determinação do desgaste de material, num determinado tempo, determinava-se a agressividade (capacidade de um material para desgastar outro material) do disco dinâmico sobre o disco estático. Utilizando-se para isso um programa computacional (LabView). Posteriormente era feita a regressão linear dos valores obtidos e determinado o coeficiente angular, utilizado no cálculo de agressividade. Valores elevados de agressividade indicam uma maior agressão do disco dinâmico contra o disco estático. Os resultados mostraram um comportamento variável para cada material que foi polimerizado nos diferentes tempos de polimerização utilizado, mostrando que o método para fazer estudos de desgaste é prático e rápido para testar materiais novos antes da sua utilização.1317787Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Não temIn the current market an increasing quality is demanded to manufacture products. At the odontologic market the composed resins are becoming more and more used to replace old materials, like amalgamates in the aesthetic and functional restorations, since they present a better appearance and easier manuscript. The chemical composition of these materials varies and the results of the chemical reactions of polymerization processes are quite unknown. The aim of this work was to measure the resistance of the abrasive wear of six composed resins sold in Brazilian market when displayed to polymerization periods of 10, 20 and 40 seconds. The grinding disc method appropriated for odontology was used to make this process possible. For this a bank of assays in which a porcelain covered dynamic disc consumes a static disc recovered by the polymerized resin is used to demonstrate the method in a pre-established time. The abrasive wear was determined by the calculation of the aggressiveness (capacity of a material to consume another). This aggressiveness is determined by an initial graph of displacement for time, through the computational method (LabView program). After they have passed through a linear regression the results give as a possibility the angular coefficient, considered a parameter at the calculation of aggressiveness. Higher values of aggressiveness which means a higher aggression suffered by the resin disc indicate worse resistance to the abrasive consuming of this resin in relation to porcelain. The results showed a variable comportment for each material ahead the different polymerization time, which prove the importance in create a practical and fast analyses method to test new materials before their us

Performance of prototypes for the ALICE electromagnetic calorimeter

The performance of prototypes for the ALICE electromagnetic sampling calorimeter has been studied in test beam measurements at FNAL and CERN. A $4\times4$ array of final design modules showed an energy resolution of about 11% /$\sqrt{E(\mathrm{GeV})}$ $\oplus$ 1.7 % with a uniformity of the response to electrons of 1% and a good linearity in the energy range from 10 to 100 GeV. The electromagnetic shower position resolution was found to be described by 1.5 mm $\oplus$ 5.3 mm /$\sqrt{E \mathrm{(GeV)}}$. For an electron identification efficiency of 90% a hadron rejection factor of $>600$ was obtained.Comment: 10 pages, 10 figure

Prognostic impact of macrometastasis linear size in sentinel node biopsy for breast carcinoma

AIM: The aim of the present study was to evaluate the risk of axillary non-sentinel lymph-node metastases (ALN) in breast cancer patients presenting macrometastasis (Mac-m) in the sentinel lymph node (SN). MATERIALS AND METHODS: A retrospective series of 1464 breast cancers from patients who underwent ALN dissection following the diagnosis of Mac-m in the sentinel node (SN) was studied. In all the cases the MAC-m linear size was evaluated and correlated with presence or absence of non-SN ALN metastases. RESULTS: Non-SN metastases were detected in 644\1464 cases (43.98%). The risk of further axillary metastases ranged from 20.2% (37/183) in cases with Mac-m between 2 and 2.9 mm, to 65.3% (262/401) in cases with Mac-m measuring > 10 mm. The risk of non-SN ALN metastases showed a 3% increase, parallel to each mm increment in SN metastasis size. The data evaluated with the receiver operating characteristic (ROC) curve showed that the Mac-m could be subdivided according to a new cut-off of 7 mm. pT1 tumours, with Mac-m < 7 mm had a risk of non-SN ALN metastases of <30%. Furthermore 109/127 of these (85.8%) had 3 or less non-SN ALN -metastases. CONCLUSIONS: The present data give a detailed description on the risk of non-SN ALN involvement, that may be useful in the evaluation of breast cancer patients. It is suggested that a Mac-m size of <7 mm is related to a low residual axillary disease burden in breast cancer patients with small (pT1) tumours