Separation of the optical and mass features of particle components in different aerosol mixtures by using POLIPHON retrievals in synergy with continuous polarized Micro-Pulse Lidar (P-MPL) measurements

The application of the POLIPHON (POlarization-LIdar PHOtometer Networking) method is presented for the first time in synergy with continuous 24/7 polarized Micro-Pulse Lidar (P-MPL) measurements to derive the vertical separation of two or three particle components in different aerosol mixtures, and the retrieval of their particular optical properties. The procedure of extinction-to-mass conversion, together with an analysis of the mass extinction efficiency (MEE) parameter, is described, and the relative mass contribution of each aerosol component is also derived in a further step. The general POLIPHON algorithm is based on the specific particle linear depolarization ratio given for different types of aerosols and can be run in either 1-step (POL-1) or 2 steps (POL-2) versions with dependence on either the 2- or 3-component separation. In order to illustrate this procedure, aerosol mixing cases observed over Barcelona (NE Spain) are selected: a dust event on 5 July 2016, smoke plumes detected on 23 May 2016 and a pollination episode observed on 23 March 2016. In particular, the 3-component separation is just applied for the dust case: a combined POL-1 with POL-2 procedure (POL-1/2) is used, and additionally the fine-dust contribution to the total fine mode (fine dust plus non-dust aerosols) is estimated. The high dust impact before 12:00UTC yields a mean mass loading of 0.6±0.1gm-2 due to the prevalence of Saharan coarse-dust particles. After that time, the mean mass loading is reduced by two-thirds, showing a rather weak dust incidence. In the smoke case, the arrival of fine biomass-burning particles is detected at altitudes as high as 7km. The smoke particles, probably mixed with less depolarizing non-smoke aerosols, are observed in air masses, having their origin from either North American fires or the Arctic area, as reported by HYSPLIT back-trajectory analysis. The particle linear depolarization ratio for smoke shows values in the 0.10–0.15 range and even higher at given times, and the daily mean smoke mass loading is 0.017±0.008gm-2, around 3% of that found for the dust event. Pollen particles are detected up to 1.5km in height from 10:00UTC during an intense pollination event with a particle linear depolarization ratio ranging between 0.10 and 0.15. The maximal mass loading of Platanus pollen particles is 0.011±0.003gm-2, representing around 2% of the dust loading during the higher dust incidence. Regarding the MEE derived for each aerosol component, their values are in agreement with others referenced in the literature for the specific aerosol types examined in this work: 0.5±0.1 and 1.7±0.2m2g-1 are found for coarse and fine dust particles, 4.5±1.4m2g-1 is derived for smoke and 2.4±0.5m2g-1 for non-smoke aerosols with Arctic origin, and a MEE of 2.4±0.8m2g-1 is obtained for pollen particles, though it can reach higher or lower values depending on predominantly smaller or larger pollen grain sizes. Results reveal the high potential of the P-MPL system, a simple polarization-sensitive elastic backscatter lidar working in a 24/7 operation mode, to retrieve the relative optical and mass contributions of each aerosol component throughout the day, reflecting the daily variability of their properties. In fact, this procedure can be simply implemented in other P-MPLs that also operate within the worldwide Micro-Pulse Lidar Network (MPLNET), thus extending the aerosol discrimination at a global scale. Moreover, the method has the advantage of also being relatively easily applicable to space-borne lidars with an equivalent configuration such as the ongoing Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) on board NASA CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) and the forthcoming Atmospheric Lidar (ATLID) on board the ESA EarthCARE mission.Peer ReviewedPostprint (published version

Real-time backstepping control for fuel cell vehicle using supercapacitors

A key issue of real-time applications is ensuring the operation by taking into account the stability constraints. For multisource vehicles, stability is impacted by the multisource interactions. Backstepping control ensures stable control for most classes of nonlinear systems. Nevertheless, no backstepping control in real time has been yet proposed for multisource vehicles. The objective of this paper is to apply the backstepping control to a multisource vehicle with fuel cell and supercapacitors for real-time implementation. A distribution criterion is used to allocate energy between sources. Experimental results demonstrate that the developed backstepping control can be implemented in real-time conditions. The supercapacitors can thus help the fuel cell to meet the requirements of the load with a guarantee of system stability. © 1967-2012 IEEE

Quantum hypercomputation based on the dynamical algebra su(1,1)

An adaptation of Kieu's hypercomputational quantum algorithm (KHQA) is presented. The method that was used was to replace the Weyl-Heisenberg algebra by other dynamical algebra of low dimension that admits infinite-dimensional irreducible representations with naturally defined generalized coherent states. We have selected the Lie algebra $\mathfrak{su}(1,1)$, due to that this algebra posses the necessary characteristics for to realize the hypercomputation and also due to that such algebra has been identified as the dynamical algebra associated to many relatively simple quantum systems. In addition to an algebraic adaptation of KHQA over the algebra $\mathfrak{su}(1,1)$, we presented an adaptations of KHQA over some concrete physical referents: the infinite square well, the infinite cylindrical well, the perturbed infinite cylindrical well, the P{\"o}sch-Teller potentials, the Holstein-Primakoff system, and the Laguerre oscillator. We conclude that it is possible to have many physical systems within condensed matter and quantum optics on which it is possible to consider an implementation of KHQA.Comment: 25 pages, 1 figure, conclusions rewritten, typing and language errors corrected and latex format changed minor changes elsewhere and

Mise en place d’une méthodologie d’identification et d’analyse des stérols oxygénés présents dans les kystes radiculo-dentaires

Our work has two main aims: to identify oxygenated sterols that accompany cholesterol in dental cyst and to develop effective methods for «profile» analyses of these sterols. Attention as focused on a family of products derived from cholesterol, characterized by the presence of one or more oxygenated functions.More than fifty of these oxysterols are known and find most of time in differents parts of the body. In the procedure, lipids are isolated from dental cyst, the fraction is trimethylsilylated and analysed by capillary gas chromatography. Sterols are identified by comparison with reference compounds. However, two sterols of particular interest, viz cholesterol α and β epoxides, are so easily produced from cholesterol (even when rigorous precautions are taken) that indirect methods of analysis are strongly advisable. An adequate degree of quantification is possible for sterols such as 26-Hydroxycholesterol (26OHCL), which do not arise significantly as artefacts. Even to verify the fraction which seems to be 26OHCL we used thin layer chromatography coupled with mass spectrometer.La présence de cristaux de cholestérol dans la majorité des kystes radiculo-dentaires (KRD) permet de penser qu’ils s’accompagnent d’oxystérols (OS). Ces substances agissent sur de nombreux mécanismes biologiques tels: la régulation physiologique du cholestérol, la multiplication cellulaire ou le métabolisme de l’acide arachidonique. Notre travail a pour but de mettre au point une technique de mise en évidence et de dosage des OS au sein des KRD. Les techniques utilisées sont des techniques de chromatographie en phase vapeur et de spectrométrie de masse. Cinq oxystérols sont isolés: 7OXO, 7βOH, 26OHCL, triol et époxydes α et β. L’activité biologique de certains de ces oxystérols semble favoriser le développement des kystes radiculo-dentaires, alors que d’autres semblent limiter leur extension

Producing cereal seeds for organic agriculture

This tool is a data sheet that can be used by French farmers who produce or want to produce cereal seeds in organic conditions. It provides advice starting from the contract signing to the seed drying, going through the specificities of the crop, the sowing, specific pests and their management, and the harvest

Treatment of asymptomatic carotid artery disease: Similar early outcomes after carotid stenting for high-risk patients and endarterectomy for standard-risk patients

BackgroundThe role of carotid angioplasty and stenting (CAS) in the treatment of asymptomatic patients with carotid disease remains controversial. The purpose of this report is to compare outcomes in asymptomatic patients treated with CAS and carotid endarterectomy (CEA). This was the initial experience performing CAS for most of the surgeons. For comparison, we also report our outcomes in standard-risk patients treated concurrently with CEA during the same period of time.MethodsA retrospective, nonrandomized review of asymptomatic patients undergoing CEA or CAS at Washington University Medical Center in St. Louis was done. Patients with >70% asymptomatic carotid stenosis treated between September 2003 and April 2005 were identified. CEA was the first therapeutic consideration in all patients. CAS was reserved for high-risk patients. Thirty-day outcomes of stroke or death were recorded. During this time interval, 248 patients were treated including with 93 CAS and with 145 CEA. Symptomatic or clinically detected adverse outcomes such as myocardial infarction (MI), arrhythmia, renal failure, or pulmonary complications were noted but were not the primary end points of this review. This study addresses only the periprocedural outcomes of CEA and CAS in asymptomatic patients. No data >30-day follow-up are included.ResultsDuring this period, 93 CAS and 145 CEA procedures were done in asymptomatic patients. Patient characteristics in both groups were similar. Carotid protection devices were used in 91.4% of CAS patients. The results in the CAS group showed one death (1.1%) and one stroke (1.1%). In the CEA group, three strokes occurred (2.1%, P = 0.9999), one associated with death (0.7%, P = 0.9999). The CAS group had 1.34 ± 0.83 risk factors vs 0.39 ± 0.58 in the CEA group (P < .0001). Median CAS and CEA length of stay was 1 day.ConclusionsCAS for asymptomatic carotid stenosis demonstrated equivalent outcomes compared with CEA, despite CAS being reserved for use in a disadvantaged subset of high-risk patients owing to anatomic risk factors or medical comorbidities. These results suggest CAS should be considered a reasonable treatment option in the high-risk but asymptomatic patient. Enthusiasm for CAS should be tempered by the recognition that long-term outcomes in CAS-treated asymptomatic patients remain unknown

Last Interglacial Arctic sea ice as simulated by the latest generation of climate models

The 16 models that simulated the Last Interglacial climate as part of the CMIP6/PMIP4 exercise consistently produce a smaller Arctic summer sea-ice area compared to the pre-industrial period, but their reduction ranges widely (28–96% of the pre-industrial area). Causes for these differences need further investigation