3,241 research outputs found
Analytical methods for bacterial kinetics studies
Methods utilize mathematical equations and models and specialized computer techniques. Techniques apply to food production, complex chemicals production, and polluted water purification
Effects of Neutron Irradiation on Carbon Doped MgB2 Wire Segments
We have studied the evolution of superconducting and normal state properties
of neutron irradiated Mg(BC) wire segments as a function
of post exposure annealing time and temperature. The initial fluence fully
suppressed superconductivity and resulted in an anisotropic expansion of the
unit cell. Superconductivity was restored by post-exposure annealing. The upper
critical field, H(T=0), approximately scales with T starting with an
undamaged T near 37 K and H(T=0) near 32 T. Up to an annealing
temperature of 400 C the recovery of T tends to coincide with a
decrease in the normal state resistivity and a systematic recovery of the
lattice parameters. Above 400 C a decrease in order along the c- direction
coincides with an increase in resistivity, but no apparent change in the
evolution of T and H. To first order, it appears that carbon doping
and neutron damaging effect the superconducting properties of MgB
independently
Ergosterol Effect on the Desaturation of 14C-Cis-Vaccenate in Tetrahymena
Supplement of ergosterol to the growth medium of the ciliated protozoan Tetrahymena pyriformis W leads to incorporation of the foreign sterol within cell membranes and suppression of synthesis of the native sterol-like compound tetrahymanol, as well as to changes in the fatty acid compositions of several major classes of membrane lipid. Alteration of fatty acid composition is thought to represent a regulatory mechanism whereby optimum membrane fluidity is maintained when the slightly dissimilar foreign sterol is added into the phospholipid bilayer of the membranes.
The present study, using several different conditions of growth temperature, substrate concentrations and incubation time, and ergosterol concentrations and exposure time, is an attempt to provide evidence supporting a hypothetical regulatory mechanism. This mechanism proposes that there is a feedback regulation by membrane-bound sterol on an enzyme or enzymes involved in synthesis of the long chain fatty acids contained in membrane phospholipid. Such a mechanism could account for the balance between sterol and fatty acid content of membrane. The data presented here show that a statistically significant increase in desaturation of 14C-cis-vaccenate can be demonstrated in Tetrahymena cell cultures whose membranes contain the foreign sterol, when growth temperature is maintained at 20° or 29.5°.
Tetrahymena desaturated 14C-cis-vaccenate substrate in both ergosterol supplemented and normal cultures. The 14C labeled product, 6,11-18:2 was recovered and separated by silver nitrate-Unisil column chromatography
Local Isoelectronic Reactivity of Solid Surfaces
The quantity w^N(r) = ( 1/ k^2 T_el)[partial n(r, T_el) / partial
T_el]_(v(r),N) is introduced as a convenient measure of the local isoelectronic
reactivity of surfaces. It characterizes the local polarizability of the
surface and it can be calculated easily. The quantity w^N(r) supplements the
charge transfer reactivity measured e.g. by the local softness to which it is
closely related. We demonstrate the applicability and virtues of the function
w^N(r) for the example of hydrogen dissociation and adsorption on Pd(100).Comment: RevTeX, 13 pages, 3 figures, to appear in Phys. Rev. Let
Correlated defects, metal-insulator transition, and magnetic order in ferromagnetic semiconductors
The effect of disorder on transport and magnetization in ferromagnetic III-V
semiconductors, in particular (Ga,Mn)As, is studied theoretically. We show that
Coulomb-induced correlations of the defect positions are crucial for the
transport and magnetic properties of these highly compensated materials. We
employ Monte Carlo simulations to obtain the correlated defect distributions.
Exact diagonalization gives reasonable results for the spectrum of valence-band
holes and the metal-insulator transition only for correlated disorder. Finally,
we show that the mean-field magnetization also depends crucially on defect
correlations.Comment: 4 pages RevTeX4, 5 figures include
Systematic effects of carbon doping on the superconducting properties of Mg(BC)
The upper critical field, , of Mg(BC) has been
measured in order to probe the maximum magnetic field range for
superconductivity that can be attained by C doping. Carbon doped boron
filaments are prepared by CVD techniques, and then these fibers are then
exposed to Mg vapor to form the superconducting compound. The transition
temperatures are depressed about C and rises at about C. This means that 3.5% C will depress from to and
raise from to . Higher fields are probably
attainable in the region of 5% C to 7% C. These rises in are
accompanied by a rise in resistivity at from about
to about . Given that the samples are polycrystalline wire
segments, the experimentally determined curves represent the upper
manifold associated with
Force calculation and atomic-structure optimization for the full-potential linearized augmented plane-wave code WIEN
Following the approach of Yu, Singh, and Krakauer [Phys. Rev. B 43 (1991)
6411] we extended the linearized augmented plane wave code WIEN of Blaha,
Schwarz, and coworkers by the evaluation of forces. In this paper we describe
the approach, demonstrate the high accuracy of the force calculation, and use
them for an efficient geometry optimization of poly-atomic systems.Comment: submitted to Comp. Phys. Commun., 27 pages, 3 figure
Nanoscale grains, high irreversibility field, and large critical current density as a function of high energy ball milling time in C-doped magnesium diboride
Magnesium diboride (MgB2) powder was mechanically alloyed by high energy ball
milling with C to a composition of Mg(B0.95C0.05)2 and then sintered at 1000 C
in a hot isostatic press. Milling times varied from 1 minute to 3000 minutes.
Full C incorporation required only 30-60 min of milling. Grain size of sintered
samples decreased with increased milling time to less than 30 nm for 20-50 hrs
of milling. Milling had a weak detrimental effect on connectivity. Strong
irreversibility field (H*) increase (from 13.3 T to 17.2 T at 4.2 K) due to
increased milling time was observed and correlated linearly with inverse grain
size (1/d). As a result, high field Jc benefited greatly from lengthy powder
milling. Jc(8 T, 4.2 K) peaked at > 80,000 A/cm2 with 1200 min of milling
compared with only ~ 26,000 A/cm2 for 60 min of milling. This non-compositional
performance increase is attributed to grain refinement of the unsintered powder
by milling, and to the probable suppression of grain growth by milling-induced
MgO nano-dispersions.Comment: 12 pages, 11 figure
- …