The E3 ubiquitin ligase IDOL regulates synaptic ApoER2 levels and is important for plasticity and learning.

Neuronal ApoE receptors are linked to learning and memory, but the pathways governing their abundance, and the mechanisms by which they affect the function of neural circuits are incompletely understood. Here we demonstrate that the E3 ubiquitin ligase IDOL determines synaptic ApoER2 protein levels in response to neuronal activation and regulates dendritic spine morphogenesis and plasticity. IDOL-dependent changes in ApoER2 abundance modulate dendritic filopodia initiation and synapse maturation. Loss of IDOL in neurons results in constitutive overexpression of ApoER2 and is associated with impaired activity-dependent structural remodeling of spines and defective LTP in primary neuron cultures and hippocampal slices. IDOL-deficient mice show profound impairment in experience-dependent reorganization of synaptic circuits in the barrel cortex, as well as diminished spatial and associative learning. These results identify control of lipoprotein receptor abundance by IDOL as a post-transcriptional mechanism underlying the structural and functional plasticity of synapses and neural circuits

Knowledge, practice, and barriers toward cervical cancer screening in Elmina, Southern Ghana

Aims: The aims of this study were: 1) to assess the level of knowledge of women about Pap smear tests, 2) to determine the practices of women regarding Pap smear tests, and 3) to determine the barriers to Pap smear tests in Elmina, Ghana. Methods: A cross-sectional study was conducted with 392 randomly selected sexually active females aged 10–74 years using structured interview questions. The Institutional Review Board of the University of Cape Coast gave ethical approval for the study and informed consent was obtained from participants. Data were analyzed with SPSS software (v19.0) using frequencies, chi-square test, and exploratory factor analysis. Results: The results revealed that 68.4% had never heard about cervical cancer, 93.6% had no knowledge on the risk factors, nine (2.3%) reported multiple sexual partners and being sexually active as risk factors, and 92% did not know about the prevention and treatment of cervical cancer. The majority (97.7%) had never heard of the Pap smear test. Only three (0.8%) women out of 392 had had a Pap smear test. Reasons for seeking a Pap smear test included referral, fear of cervical cancer, and radio campaigns. A significant association was found between institutional and personal barriers and having a Pap smear test. Conclusion: Comprehensive education on cervical cancer screening and removal of access barriers are critical in reducing risk associated with the disease and promoting women\u27s health

Shear rate threshold for the boundary slip in dense polymer films

The shear rate dependence of the slip length in thin polymer films confined between atomically flat surfaces is investigated by molecular dynamics simulations. The polymer melt is described by the bead-spring model of linear flexible chains. We found that at low shear rates the velocity profiles acquire a pronounced curvature near the wall and the absolute value of the negative slip length is approximately equal to thickness of the viscous interfacial layer. At higher shear rates, the velocity profiles become linear and the slip length increases rapidly as a function of shear rate. The gradual transition from no-slip to steady-state slip flow is associated with faster relaxation of the polymer chains near the wall evaluated from decay of the time autocorrelation function of the first normal mode. We also show that at high melt densities the friction coefficient at the interface between the polymer melt and the solid wall follows power law decay as a function of the slip velocity. At large slip velocities the friction coefficient is determined by the product of the surface induced peak in the structure factor, temperature and the contact density of the first fluid layer near the solid wall.Comment: 37 pages, 16 figure

Theoretical Study of Friction: A Case of One-Dimensional Clean Surfaces

A new method has been proposed to evaluate the frictional force in the stationary state. This method is applied to the 1-dimensional model of clean surfaces. The kinetic frictional force is seen to depend on velocity in general, but the dependence becomes weaker as the maximum static frictional force increases and in the limiting case the kinetic friction gets only weakly dependent on velocity as described by one of the laws of friction. It is also shown that there is a phase transition between state with vanishing maximum static frictional force and that with finite one. The role of randomness at the interface and the relation to the impurity pinning of the sliding Charge-Density-Wave are discussed. to appear in Phys.Rev.B. abstract only. Full text is available upon request. E-mail: [email protected]: 2 pages, Plain TEX, OUCMT-94-

Friction and wear of human hair fibres

An experimental study of the tribological properties of hair fibres is reported, and the effect of surface treatment on the evolution of friction and wear during sliding. Specifically, orthogonally crossed fibre/fibre contacts under a compressive normal load over a series of 10,000 cycle studies are investigated. Reciprocating sliding at a velocity of 0.4 mm/s−1, over a track length of 0.8 mm, was performed at 18oC and 40-50% relative humidity. Hair fibres retaining their natural sebum were studied, as well as those stripped of their sebum via hexane cleaning, and hair fibres conditioned using a commercially available product. Surface topography modifications resulting from wear were imaged using scanning electron microscopy and quantified using white light interferometry. Hair fibres that presented sebum or conditioned product at the fibre/fibre junction exhibited initial coefficients of friction at least 25% lower than those that were cleaned with hexane. Coefficients of friction were observed to depend on the directionality of sliding for hexane cleaned hair fibres after sufficient wear cycles that cuticle lifting was present, typically on the order 1,000 cycles. Cuticle flattening was observed for fibre/fibre junctions exposed to 10 mN compressive normal loads, whereas loads of 100 mN introduced substantial cuticle wear and fibre damage

Atomic Scale Sliding and Rolling of Carbon Nanotubes

A carbon nanotube is an ideal object for understanding the atomic scale aspects of interface interaction and friction. Using molecular statics and dynamics methods different types of motion of nanotubes on a graphite surface are investigated. We found that each nanotube has unique equilibrium orientations with sharp potential energy minima. This leads to atomic scale locking of the nanotube. The effective contact area and the total interaction energy scale with the square root of the radius. Sliding and rolling of nanotubes have different characters. The potential energy barriers for sliding nanotubes are higher than that for perfect rolling. When the nanotube is pushed, we observe a combination of atomic scale spinning and sliding motion. The result is rolling with the friction force comparable to sliding.Comment: 4 pages (two column) 6 figures - one ep

Haptoglobin Polymorphism: A Novel Genetic Risk Factor for Celiac Disease Development and Its Clinical Manifestations

Background: Haptoglobin (Hp) α-chain alleles 1 and 2 account for 3 phenotypes that may influence the course of inflammatory diseases via biologically important differences in their antioxidant, scavenging, and immunomodulatory properties. Hp1-1 genotype results in the production of small dimeric, Hp2-1 linear, and Hp2-2 cyclic polymeric haptoglobin molecules. We investigated the haptoglobin polymorphism in patients with celiac disease and its possible association to the presenting symptoms. Methods: We studied 712 unrelated, biopsy-proven Hungarian celiac patients (357 children, 355 adults; severe malabsorption 32.9%, minor gastrointestinal symptoms 22.8%, iron deficiency anemia 9.4%, dermatitis herpetiformis 15.6%, silent disease 7.2%, other 12.1%) and 384 healthy subjects. We determined haptoglobin phenotypes by gel electrophoresis and assigned corresponding genotypes. Results: Hp2-1 was associated with a significant risk for celiac disease (P = 0.0006, odds ratio [OR] 1.54, 95% CI 1.20–1.98; prevalence 56.9% in patients vs 46.1% in controls). It was also overrepresented among patients with mild symptoms (69.2%) or silent disease (72.5%). Hp2-2 was less frequent in patients than in controls (P = 0.0023), but patients having this phenotype were at an increased risk for severe malabsorption (OR 2.21, 95% CI 1.60–3.07) and accounted for 45.3% of all malabsorption cases. Celiac and dermatitis herpetiformis patients showed similar haptoglobin phenotype distributions. Conclusions: The haptoglobin polymorphism is associated with susceptibility to celiac disease and its clinical presentations. The predominant genotype in the celiac population was Hp2-1, but Hp2-2 predisposed to a more severe clinical course. The phenotype-dependent effect of haptoglobin may result from the molecule’s structural and functional properties

Anomalous pinning behavior in an incommensurate two-chain model of friction

Pinning phenomena in an incommensurate two-chain model of friction are studied numerically. The pinning effect due to the breaking of analyticity exists in the present model. The pinning behavior is, however, quite different from that for the breaking of analyticity state of the Frenkel-Kontorova model. When the elasticity of chains or the strength of interchain interaction is changed, pinning force and maximum static frictional force show anomalously complicated behavior accompanied by a successive phase transition and they vanish completely under certain conditions.Comment: RevTex, 9 pages, 19 figures, to appear in Phys. Rev. B58 No.23(1998

Reef Coral Reproduction in the Eastern Pacific: Costa Rica, Panamá, and the Galápagos Islands (Ecuador). VI. Agariciidae, Pavona clavus

The reproductive ecology of the zooxanthellate reef coral Pavona clavus was investigated at several sites in Costa Rica, Panama, and the Galapagos Islands (Ecuador) over the period 1985–2009. Pavona clavus displayed stable gonochorism as only five hermaphrodites were found in 590 samples. At four of five locations, sex ratios were skewed toward female dominance; however, at Saboga Island (Panama) male colonies predominated. In Panama, sexual maturity was observed in an estimated eight year old female colony, and several colonies of 10–20 years of age demonstrated gametogenesis. Sexual activity was observed at all study sites, but gamete development occurred in only 14–31% of colonies sampled sporadically. Seasonality of gametogenic activity occurred predominantly during the warm/wet season, June to August, at mainland sites (Cano Island, Costa Rica, and Gulfs of Chiriqui and Panama, Panama). This pattern was repeated in the Galapagos Islands, but mainly from March to May when seasonally high sea temperatures and rainfall prevailed there. Histological sampling and field observations indicated that spawning was centered around the full moon, most frequently on lunar day 17, and near sunset (1,800 h). Mean fecundity (mature ova cm-2 live tissue) estimates were significantly different for two sites and ranged from ~1,780 (Saboga Island, Gulf of Panama, seasonally upwelling) to ~4,280 (Uva Is, Gulf of Chiriqui, nonupwelling). Assuming three annual spawning events colony-1 (August, September, October), extrapolation of minimum and maximum fecundities yield 5,340 and 12,840 ova cm-2 year-1. Seasonal, lunar, and diel spawning patterns in nine zooxanthellate species at Uva Island indicate asynchronous coral community spawning

Thermal effects on atomic friction

We model friction acting on the tip of an atomic force microscope as it is dragged across a surface at non-zero temperatures. We find that stick-slip motion occurs and that the average frictional force follows $|\ln v|^{2/3}$, where $v$ is the tip velocity. This compares well to recent experimental work (Gnecco et al, PRL 84, 1172), permitting the quantitative extraction of all microscopic parameters. We calculate the scaled form of the average frictional force's dependence on both temperature and tip speed as well as the form of the friction-force distribution function.Comment: Accepted for publication, Physical Review Letter