Development of secretome‑based strategies to improve cell culture protocols in tissue engineering

This study was supported by the Spanish Plan Nacional de Investigación Científica, Desarrollo e Innovación Tec- nológica (I + D + I) of the Spanish Ministry of Science and Innovation (Instituto de Salud Carlos III), grants FIS PI18/0331, FIS PI21/0980, FIS PI18/0332, FIS PI20/0317, ICI19/00024 and ICI21/00010, and by grants PE-0395- 2019 and PI-0442-2019 from the Consejería de Salud y Familias, Junta de Andalucía, Spain. Additional support was provided through grant B-CTS-450-UGR20 (proyectos de I + D + i en el marco del Programa Operativo FEDER Andalucía 2014–2020, University of Granada and Consejería de Transformación Económica, Industria, Conocimiento y Universidades), and cofinancing was provided from the European Regional Development Fund (ERDF) through the “Una manera de hacer Europa” program.The online version contains supplementary material available at https://doi. org/10. 1038/s41598-022-14115-yAdvances in skin tissue engineering have promoted the development of artificial skin substitutes to treat large burns and other major skin loss conditions. However, one of the main drawbacks to bioengineered skin is the need to obtain a large amount of viable epithelial cells in short periods of time, making the skin biofabrication process challenging and slow. Enhancing skin epithelial cell cultures by using mesenchymal stem cells secretome can favor the scalability of manufacturing processes for bioengineered skin. The effects of three different types of secretome derived from human mesenchymal stem cells, e.g. hADSC‑s (adipose cells), hDPSC‑s (dental pulp) and hWJSC‑s (umbilical cord), were evaluated on cultured skin epithelial cells during 24, 48, 72 and 120 h to determine the potential of this product to enhance cell proliferation and improve biofabrication strategies for tissue engineering. Then, secretomes were applied in vivo in preliminary analyses carried out on Wistar rats. Results showed that the use of secretomes derived from mesenchymal stem cells enhanced currently available cell culture protocols. Secretome was associated with increased viability, proliferation and migration of human skin epithelial cells, with hDPSC‑s and hWJSC‑s yielding greater inductive effects than hADSC‑s. Animals treated with hWJSC‑s and especially, hDPSC‑s tended to show enhanced wound healing in vivo with no detectable side effects. Mesenchymal stem cells derived secretomes could be considered as a promising approach to cell‑free therapy able to improve skin wound healing and regeneration.Spanish Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica (I + D + I) of the Spanish Ministry of Science and Innovation (Instituto de Salud Carlos III) FIS PI18/0331, FIS PI21/0980, FIS PI18/0332, FIS PI20/0317, ICI19/00024, ICI21/00010Junta de Andalucia PE-0395-2019, PI-0442-2019Proyectos de I + D + i en el marco del Programa Operativo FEDER Andalucia , University of Granada and Consejeria de Transformacion Economica, Industria, Conocimiento y Universidades B-CTS-450-UGR20European Commissio

Identification of the affective-motivational components for learning science in pharmacy students

En el artículo se identifican los componentes afectivo–motivacionales para el aprendizaje de la ciencia en estudiantes de farmacia al condicionar la incidencia de los distintos componentes el proceso de aprendizaje. Se realiza el estudio mediante un cuestionario específico observándose variaciones en la autodeterminación, la autoeficacia, la motivación intrínseca y la motivación a corto y largo plazo con diferencias entre ambos géneros.In the article the affective-motivational components for science learning in pharmacy students are identified because the learning process is conditioned by these components. The study was carried out using a specific questionnaire. The results showed variations in self-determination, self-efficacy, intrinsic motivation, and short and long-term motivation, with differences between both genders

Overview of JET results for optimising ITER operation

The JET 2019–2020 scientific and technological programme exploited the results of years of concerted scientific and engineering work, including the ITER-like wall (ILW: Be wall and W divertor) installed in 2010, improved diagnostic capabilities now fully available, a major neutral beam injection upgrade providing record power in 2019–2020, and tested the technical and procedural preparation for safe operation with tritium. Research along three complementary axes yielded a wealth of new results. Firstly, the JET plasma programme delivered scenarios suitable for high fusion power and alpha particle (α) physics in the coming D–T campaign (DTE2), with record sustained neutron rates, as well as plasmas for clarifying the impact of isotope mass on plasma core, edge and plasma-wall interactions, and for ITER pre-fusion power operation. The efficacy of the newly installed shattered pellet injector for mitigating disruption forces and runaway electrons was demonstrated. Secondly, research on the consequences of long-term exposure to JET-ILW plasma was completed, with emphasis on wall damage and fuel retention, and with analyses of wall materials and dust particles that will help validate assumptions and codes for design and operation of ITER and DEMO. Thirdly, the nuclear technology programme aiming to deliver maximum technological return from operations in D, T and D–T benefited from the highest D–D neutron yield in years, securing results for validating radiation transport and activation codes, and nuclear data for ITER

Synthesis and behavior of click cross-linked alginate hydrogels

Various bismaleimides and trismaleimides of varying molar masses, chemical architectures and functionalities were explored as cross-linkers for furan-modified alginate chains via Diels-Alder click reactions. An environmentally friendly approach is described for the preparation of hydrogels based on naturally occurring biomacromolecules, without catalysts. The behavior of the resulting polysaccharides-based hydrogels was analyzed in terms of swelling, rheological properties and drug-release efficiency, in connection with potential biomedical applications. The use of the different cross-linkers allows tuning the mechanical properties as well as the pulsatile swelling behavior of the hydrogels. When using trifunctional cross-linkers stiffer hydrogels were formed with high storage modulus whereas the chain length and the composition of the cross-linker clearly influence the swelling of the hydrogel network. In connection with drug delivery applications, release of vanillin as a traceable aromatic biobased model drug was also monitored as a function of hydrogel composition. To the best of our knowledge, for the first-time furan-modified alginates were reacted and studied with polyethylene glycol-based bis or trismaleimides with different molar masses and architectures, resulting in advanced hydrogels with different behavior

Carbonaceous filler type and content dependence of the physical-chemical and electromechanical properties of thermoplastic elastomer polymer composites

Graphene, carbon nanotubes (CNT), and carbon nanofibers (CNF) are the most studied nanocarbonaceous fillers for polymer-based composite fabrication due to their excellent overall properties. The combination of thermoplastic elastomers with excellent mechanical properties (e.g., styrene-b-(ethylene-co-butylene)-b-styrene (SEBS)) and conductive nanofillers such as those mentioned previously opens the way to the preparation of multifunctional materials for large-strain (up to 10% or even above) sensor applications. This work reports on the influence of different nanofillers (CNT, CNF, and graphene) on the properties of a SEBS matrix. It is shown that the overall properties of the composites depend on filler type and content, with special influence on the electrical properties. CNT/SEBS composites presented a percolation threshold near 1 wt.% filler content, whereas CNF and graphene-based composites showed a percolation threshold above 5 wt.%. Maximum strain remained similar for most filler types and contents, except for the largest filler contents (1 wt.% or more) in graphene (G)/SEBS composites, showing a reduction from 600% for SEBS to 150% for 5G/SEBS. Electromechanical properties of CNT/SEBS composite for strains up to 10% showed a gauge factor (GF) varying from 2 to 2.5 for different applied strains. The electrical conductivity of the G and CNF composites at up to 5 wt.% filler content was not suitable for the development of piezoresistive sensing materials. We performed thermal ageing at 120 °C for 1, 24, and 72 h for SEBS and its composites with 5 wt.% nanofiller content in order to evaluate the stability of the material properties for high-temperature applications. The mechanical, thermal, and chemical properties of SEBS and the composites were identical to those of pristine composites, but the electrical conductivity decreased by near one order of magnitude and the GF decreased to values between 0.5 and 1 in aged CNT/SEBS composites. Thus, the materials can still be used as large-deformation sensors, but the reduction of both electrical and electromechanical response has to be considered.ThisworkwassupportedbythePortugueseFoundationforScienceandTechnology(FCT)intheframework of the StrategicFunding UID/FIS/04650/2013 and UID/CTM/50025/2013. Financial support was also provided by ERDF funds through the Portuguese Operational Programme for Competitiveness and Internationalization-COMPETE 2020, and national funds through FCT, under projects PTDC/EEI-SII/5582/2014 and PTDC/CTM-ENE/5387/2014. PC thanks to FCT by financial support for the SFRH/BPD/110914/2015 grant. Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support) and from the Basque Government Industry Department under the ELKARTEK (ACTIMAT project) and HAZITEK programare also acknowledged.info:eu-repo/semantics/publishedVersio

Ionic-liquid-based printable materials for thermochromic and thermoresistive applications

Smart materials exhibiting thermochromic and themoresistive properties based on the electroactive polymer poly(vinylidene fluoride) (PVDF) and the ionic liquid (IL) bis(1-butyl-3-methylimidazolium) tetrachloronickelate ([Bmim](2)[NiCl4]) have been developed with different contents of [Bmim](2)[NiCl4] (10, 20, and 40 wt %) within the polymer matrix. The morphology of the composites is studied, and the thermochromic and thermoresistive properties are evaluated. Independently of the IL content, the PVDF/[Bmim](2)[NiCl4] composites present a porous morphology and thermochromic response, revealed by the color change of the composites from transparent to dark blue, attributed to the tetrahedral complex NiCl42- formed after a dehydration process. Further, the electrical conductivity increases with increasing IL content and decreases with increasing temperature. It is also shown that the incorporation of the IL into the PVDF matrix leads to an increase in the electroactive beta phase and a decrease in the degree of crystallinity and thermal stability with increasing [Bmim](2)[NiCl4] content. The printability and applicability of the developed materials as sensors are also demonstrated.The authors acknowledge the FCT-Fundacao para a Ciencia e Tecnologia-for financial support under the framework of the Strategic Funding UID/FIS/04650/2013, the Associated Laboratory Research Unit for Green Chemistry, Technologies and Clean Processes, LAQV (financed by national funds from FCT/MEC, UID/QUI/50006/2013, and ERDF under the PT2020, POCI-01-0145-FEDER-007265), and project PTDC/EEI-SII/5582/2014 by FEDER funds through the COMPETE 2020-Programa Operational Competitividade e Internacionalizacao (POCI) with the reference project POCI-01-0145-FEDER-006941. Funds provided by FCT in the framework of EuroNanoMed 2016 call, Project LungChek ENMed/0049/2016, are also gratefully acknowledged. D.M.C., N.P., and J.M.S.S.E. also acknowledge the grant/contract SFRH/BPD/121526/2016, SFRH/BD/131729/2017, and IF/00355/2012, respectively. The authors acknowledge funding by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-3-R (AEI/FEDER, UE) and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZITEK, and PIBA (PIBA-2018-06) programs, respectively

Ionic liquid-polymer composites: a new platform for multifunctional applications

Ionic liquids (ILs) have emerged as a novel class of chemical compounds for the development of advanced (multi)functional materials with outstanding potential in applications of several areas due to the ILs unique properties and functionalities. The combination of ILs with polymers, in a composite, allows developing smart materials, which synergistically combine the features of specific polymers and ILs. Moreover, ILs can be extensively modified by the incorporation of functional groups with specific properties into the cation, anion or both. Thus, it is possible to tune the IL, the polymer, or both to obtain a broad spectrum of multifunctional composites and address the specific requirements of many applications. This work focusses on advanced materials and strategies concerning ILs and polymers for the development of smart IL/polymer-based materials for applications including responsive and sensitive sensors, actuators, environment, batteries, fuel cells, biomedical applications, among others.The authors thank the FCT (Fundação para a Ciência e Tecnologia) for financial support under the framework of the Strategic Funding UID/FIS/04650/2019 and projects PTDC/BTMMAT/28237/2017, PTDC/EMD-EMD/28159/2017 and PTDC/FIS-MAC/28157/2017. Funds provided by FCT in the framework of EuroNanoMed 2016 call, Project LungChek ENMed/0049/2016 are also gratefully acknowledged. D.M.C, L.C.F and C.M.C also thanks to the FCT for the grants SFRH/BPD/121526/2016, SFRH/BD/145345/2019 and SFRH/BPD/112547/2015, respectively. PMM thanks to the ENMed_CQ_CF_04_2018 grant. Finally, the authors acknowledge funding by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-3-R (AEI/FEDER, UE) and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZITEK and PIBA (PIBA-2018-06) programs, respectively