Controlling internal barrier in low loss BaTiO3 supercapacitors

Supercapacitor behavior has been reported in a number of oxides including reduced BaTiO3 ferroelectric ceramics. These so-called giant properties are however not easily controlled. We show here that the continuous coating of individual BaTiO3 grains by a silica shell in combination with spark plasma sintering is a way to process bulk composites having supercapacitor features with low dielectric losses and temperature stability. The silica shell acts both as an oxidation barrier during the processing and as a dielectric barrier in the final composite

Characterization of nanodimensional Ni-Zn ferrite prepared by mechanochemical and thermal methods.

Nickel zinc ferrite nanoparticles, Ni1−xZnxFe2O4 (x = 0, 0.2, 0.5, 0.8, 1.0), with dimensions below 10 nm have been prepared by combining chemical precipitation with high-energy ball milling. For comparison, their analogues obtained by thermal synthesis have also been studied. Mössbauer spectroscopy, X-ray diffraction, and magnetic measurements are used for the characterization of the obtained materials. X-ray diffraction shows that after 3h of mechanical treatment ferrites containing zinc are formed, while 6h of treatment is needed to obtain NiFe2O4. The magnetic properties of the samples exhibit a strong dependence on the phase composition, particle size and preparation method

Monolithes de silice et de carbone à porosité hiérarchisée obtenus par frittage SPS

La silice SBA-15 et le carbone CMK-3 possèdent une grande surface spécifique et un volume important de mésopores ordonnés dans une symétrie hexagonale (groupe d’espace p6 mm). Il est nécessaire de préserver leurs caractéristiques lors de la mise en forme de ces matériaux, pour un grand nombre d’applications. Le frittage SPS (Spark Plasma Sintering) des poudres a été effectué sans charge ou avec une charge uniaxiale de 25 MPa et à des températures de 600 à 800 ◦C pour la silice et 1100 à 1300 ◦C pour le carbone, pendant 5 minutes. Les isothermes d’adsorption/désorption d’azote montrent que les monolithes obtenus conservent une surface spécifique élevée (300 à 500 m2/g) et un volume mésoporeux de l’ordre de 0,7 cm3/g. La coexistence de la mésoporosité et d’une macroporosité interconnectée de volume voisin est observée par MEB (Microscopie Électronique à Balayage) et MET (Microscopie Électronique en Transmission). En outre, l’organisation de la mésoporosité est partiellement maintenue comme le mettent en évidence la DRX (Diffraction des Rayons X) et la MET

Mössbauer and magnetic study of Co x Fe3−x O4 nanoparticles

Magnetic nanoparticles of cobalt ferrites Co x Fe3−x O4 (x = 1 or 2) have been obtained either by mechanical milling or thermal treatment of pre-prepared layered double hydroxide carbonate x-LDH–CO3. Mechanical milling of the 1-LDH–CO3 leads to the large-scale preparation of nearly spherical nanoparticles of CoFe2O4, the size of which (5 to 20 nm) is controlled by the treatment time. Core-shell structure with surface spin-canting has been considered for the nanoparticles formed to explain the observed hysteresis loop shift (from ZFC–FC) in the magnetic properties. Annealing treatment of the 2-LDH–CO3 below 673 K results in the formation of nearly spherical pure Co2FeO4 nanoparticles. At 673 K and above, the LDH decomposition leads to the formation of a mixture of both spinels phases Co2FeO4 and CoFe2O4, the amount of the latter increases with annealing temperature. Unusually high magnetic hardness characterized by a 22 kOe coercive field at 1.8 K has been observed, which reflects the high intrinsic anisotropy for Co2FeO4

High-Temperature Transport Properties of Yb4−xSmxSb3

Polycrystalline L4Sb3 (L = La, Ce, Sm, and Yb) and Yb4−x Sm x Sb3, which crystallizes in the anti-Th3P4 structure type (I-43d no. 220), were synthesized via high-temperature reaction. Structural and chemical characterization were performed by x-ray diffraction and electronic microscopy with energy-dispersive x-ray analysis. Pucks were densified by spark plasma sintering. Transport property measurements showed that these compounds are n-type with low Seebeck coefficients, except for Yb4Sb3, which shows semimetallic behavior with hole conduction above 523 K. By partially substituting Yb by a trivalent rare earth we successfully improved the thermoelectric figure of merit of Yb4Sb3 up to 0.7 at 1273 K

Microhardness and friction coefficient of multi-walled carbon nanotube-yttria-stabilized ZrO2 composites prepared by spark plasma sintering

Multi-walled carbon nanotubes (eight walls) are mixed with an yttria-stabilized ZrO2 powder. The specimens are densified by spark plasma sintering. Compared to ZrO2, there is a 3.8-fold decrease of the friction coefficient against alumina upon the increase in carbon content. Examinations of the friction tracks show that wear is very low when the carbon content is sufficient. Exfoliation of the nanotubes due to shearing stresses and incorporation of the debris into a lubricating film over the contact area is probable

Mössbauer study of nanodimensional nickel ferrite-mechanochemical synthesis and catalytic properties

Iron-nickel spinel oxide NiFe2O4 nanoparticles have been prepared by the combination of chemical precipitation and subsequent mechanical milling. For comparison, their analogue obtained by thermal synthesis is also studied. Phase composition and structural properties of iron-nickel oxides are investigated by X-ray diffraction and Mössbauer spectroscopy. Their catalytic behavior in methanol decomposition to CO and methane is tested. An influence of the preparation method on the reduction and catalytic properties of iron-nickel samples is established

Étude du frittage non-conventionnel de céramiques de type YAG:Nd en présence d’ajout de silice

L’objectif de cette étude était de cerner l’influence du procédé de frittage non conventionnel employé pour la mise en forme des pièces (frittage SPS ou post-frittage HIP) sur l’activation des processus densifiants. Il s’avère qu’un traitement SPS des poudres initiales permet d’abaisser la température de début de frittage et conduit dans certaines conditions à des pièces translucides ou transparentes. L’influence de la silice, introduit comme ajout de frittage, et du néodyme, introduit comme dopant, est également discutée dans ce travail. Le post-frittage HIP, quant à lui, permet l’élimination de la porosité résiduelle dans les échantillons, ce qui conduit à la transparence des pièces réalisées

Damped precession of the magnetization vector of superparamagnetic nanoparticles excited by femtosecond optical pulses

The ultrafast magnetization and electron dynamics of superparamagnetic cobalt nanoparticles, embedded in a dielectric matrix, have been investigated using femtosecond optical pulses. Our experimental approach allows us to bypass the superparamagnetic thermal fluctuations and to observe the trajectory of the magnetization vector which exhibits a strongly damped precession motion. The magnetization precession is damped faster in the superparamagnetic particles than in cobalt films or when the particle size decreases, suggesting that the damping is enhanced at the metal dielectric interface. Our observations question the gyroscopic nature of the magnetization pathway when superparamagnetic fluctuations take place as we discuss in the context of Brown’s model

Preparation of transparent oxyapatite ceramics by combined use of freeze-drying and spark-plasma sintering

Lanthanum silicate oxyapatites, ion-conducting materials presenting a strong aversion against densification, have been obtained in the form of dense transparent ceramics, by combining the beneficial use of freeze-drying and spark plasma sintering methods