Boosting Productivity of Laser Powder Bed Fusion for AlSi10Mg

The Laser Powder Bed Fusion (L-PBF) process is recognized for high-end industrial applications due to its ability to produce parts with high geometric complexity. If lightweighting is one of the main strengths of L-PBF, a weakness is still the trade-off between high mechanical properties and competitive productivity. This objective can be targeted through a fine tuning of the process parameters within the manufacturing window. The paper pursues the combined optimization of part quality and process productivity for AlSi10Mg by going beyond the commonly used approach based solely on volumetric energy density. The effects of hatch distance and scan speed on the two targets were analyzed in detail. The best results were achieved by the adoption of a high scan speed and a low hatch distance, with notably different outcomes for nearly the same energy density

Effect of powder recycling in laser-based powder bed fusion of Ti-6Al-4V

Additive manufacturing (AM) has shown promise to process parts for end-use applications, however stringent requirements must be fulfilled in terms of reliability and predictability. The expensiveness of raw materials for AM, especially for metal-based Powder Bed Fusion (PBF), brings about the need for a careful recycling of powder, but the effect of powder reuse on both processing conditions and final part performance is still the focus of intensive research in the open literature. Although ASTM F2924-14 specifies the virgin-to-used powder ratio to be introduced to manufacture titanium-6aluminum-4vanadium (Ti-6Al-4V) components by PBF, a deeper understanding of the effect of powder recycling on the mechanical properties of finished parts is expected to foster a more efficient and safe reuse. The present contribution is therefore addressed to investigate the consequence of Ti- 6Al-4V powder recycling on the flowability, particle size distribution and morphology of the feedstock material as well as on the density and tensile performance of built parts. In order to quantify the recyclability of powders, a new "average usage time" (AUT) parameter is defined to account for both the real usage time of the powder and the virgin-to-used powder mixing ratio. The new parameter, whose applicability can be readily extended to any kind of feedstock powder, offers a significant contribution to achieve a more consistent and economical recycling of raw materials for PBF processing

Patrimoine de marque : le passé au service du management de la marque

Researchers and practitioners talk about brand heritage even though its meaning and its difference from related concepts are not entirely clear. Through a review of the multidisciplinary literature, this article distinguishes brand heritage from the concepts of inheritance, retro, nostalgia, and authenticity. This article defines brand heritage as a dynamic construct based on an inherited or borrowed past, with a view to supporting brand identity and being transmitted. A total of 11 research propositions are presented within an inclusive framework that paves the way for future research and contributes to research on brand management and the role of consumers in creating value

Enhancing cognitive training effects in Alzheimer's disease: rTMS as an add-on treatment

The treatment of Alzheimer's disease (AD) in the field of non-pharmacological interventions is a challenging issue, given the limited benefits of the available drugs. Cognitive training (CT) represents a commonly recommended strategy in AD. Recently, repetitive transcranial magnetic stimulation (rTMS) has gained increasing attention as a promising therapeutic tool for the treatment of AD, given its ability of enhancing neuroplasticity. In the present randomized, double-blind, sham-controlled study, we aimed at investigating the add-on effect of a high frequency rTMS protocol applied over the left dorsolateral prefrontal cortex (DLPFC) combined with a face-name associative memory CT in the continuum of AD pathology. Fifty patients from a very early to a moderate phase of dementia were randomly assigned to one of two groups: CT plus real rTMS or CT plus placebo rTMS. The results showed that the improvement in the trained associative memory induced with rTMS was superior to that obtained with CT alone. Interestingly, the extent of the additional improvement was affected by disease severity and levels of education, with less impaired and more educated patients showing a greater benefit. When testing for generalization to non-trained cognitive functions, results indicated that patients in CT-real group showed also a greater improvement in visuospatial reasoning than those in the CT-sham group. Interestingly, this improvement persisted over 12 weeks after treatment beginning. The present study provides important hints on the promising therapeutic use of rTMS in AD