714 research outputs found
A Preliminary Comparison of the Mechanical Properties of Chemically Cured and Ultrasonically Cured Glass Ionomer Cements, using Nano-Indentation Techniques
There is a requirement for a dental cement with properties comparable or superior to conventional glass ionomer cements (GICs) but with the command set properties of the resin modified GICs. The objective of this work was to show that the application of ultrasound to conventional Fuji IX commercial glass ionomer cement imparts a command set, whilst improving the short-term surface mechanical properties. Nano-indentation techniques were employed to highlight the improvements in hardness and creep resistance imparted to the cement through the application of ultrasound. The instant set imparted by the application of ultrasound provides improved surface hardness and creep, particularly within the first 24h after setting. The surface hardness of the chemically cured Fuji IX (176MPa) increased by an order of magnitude when set ultrasonically (2620MPa), whilst creep reduced to a negligible amount. Rapid setting allows for shorter chair time and an improved clinical technique, making restorations more convenient for both the patient and clinician. Copyright © 2001 Elsevier Science Ltd
Interactions between magnetohydrodynamic shear instabilities and convective flows in the solar interior
Motivated by the interface model for the solar dynamo, this paper explores
the complex magnetohydrodynamic interactions between convective flows and
shear-driven instabilities. Initially, we consider the dynamics of a forced
shear flow across a convectively-stable polytropic layer, in the presence of a
vertical magnetic field. When the imposed magnetic field is weak, the dynamics
are dominated by a shear flow (Kelvin-Helmholtz type) instability. For stronger
fields, a magnetic buoyancy instability is preferred. If this stably stratified
shear layer lies below a convectively unstable region, these two regions can
interact. Once again, when the imposed field is very weak, the dynamical
effects of the magnetic field are negligible and the interactions between the
shear layer and the convective layer are relatively minor. However, if the
magnetic field is strong enough to favour magnetic buoyancy instabilities in
the shear layer, extended magnetic flux concentrations form and rise into the
convective layer. These magnetic structures have a highly disruptive effect
upon the convective motions in the upper layer.Comment: 11 pages, 10 figures, accepted for publication in MNRA
Convective intensification of magnetic fields in the quiet Sun
Kilogauss-strength magnetic fields are often observed in intergranular lanes at the photosphere in the quiet Sun. Such fields are stronger than the equipartition field B_e, corresponding to a magnetic energy density that matches the kinetic energy density of photospheric convection, and comparable with the field B_p that exerts a magnetic pressure equal to the ambient gas pressure. We present an idealised numerical model of three-dimensional compressible magnetoconvection at the photosphere, for a range of values of the magnetic Reynolds number. In the absence of a magnetic field, the convection is highly supercritical and is characterised by a pattern of vigorous, time-dependent, “granular” motions. When a weak magnetic field is imposed upon the convection, magnetic flux is swept into the convective downflows where it forms localised concentrations. Unless this process is significantly inhibited by magnetic diffusion, the resulting fields are often much greater than B_e, and the high magnetic pressure in these flux elements leads to their being partially evacuated. Some of these flux elements contain ultra-intense magnetic fields that are significantly greater than B_p. Such fields are contained by a combination of the thermal pressure of the gas and the dynamic pressure of the convective motion, and they are constantly evolving. These ultra-intense fields develop owing to nonlinear interactions between magnetic fields and convection; they cannot be explained in terms of “convective collapse” within a thin flux tube that remains in overall pressure equilibrium with its surroundings
On Predicting the Solar Cycle using Mean-Field Models
We discuss the difficulties of predicting the solar cycle using mean-field
models. Here we argue that these difficulties arise owing to the significant
modulation of the solar activity cycle, and that this modulation arises owing
to either stochastic or deterministic processes. We analyse the implications
for predictability in both of these situations by considering two separate
solar dynamo models. The first model represents a stochastically-perturbed flux
transport dynamo. Here even very weak stochastic perturbations can give rise to
significant modulation in the activity cycle. This modulation leads to a loss
of predictability. In the second model, we neglect stochastic effects and
assume that generation of magnetic field in the Sun can be described by a fully
deterministic nonlinear mean-field model -- this is a best case scenario for
prediction. We designate the output from this deterministic model (with
parameters chosen to produce chaotically modulated cycles) as a target
timeseries that subsequent deterministic mean-field models are required to
predict. Long-term prediction is impossible even if a model that is correct in
all details is utilised in the prediction. Furthermore, we show that even
short-term prediction is impossible if there is a small discrepancy in the
input parameters from the fiducial model. This is the case even if the
predicting model has been tuned to reproduce the output of previous cycles.
Given the inherent uncertainties in determining the transport coefficients and
nonlinear responses for mean-field models, we argue that this makes predicting
the solar cycle using the output from such models impossible.Comment: 22 Pages, 5 Figures, Preprint accepted for publication in Ap
Concentrating Membrane Proteins Using Asymmetric Traps and AC Electric Fields
Membrane proteins are key components of the plasma membrane and are responsible for control of chemical ionic gradients, metabolite and nutrient transfer, and signal transduction between the interior of cells and the external environment. Of the genes in the human genome, 30% code for membrane proteins (Krogh et al. J. Mol. Biol.2001, 305, 567). Furthermore, many FDA-approved drugs target such proteins (Overington et al. Nat. Rev. Drug Discovery2006, 5, 993). However, the structure-function relationships of these are notably sparse because of difficulties in their purification and handling outside of their membranous environment. Methods that permit the manipulation of membrane components while they are still in the membrane would find widespread application in separation, purification, and eventual structure-function determination of these species (Poo et al. Nature1977, 265, 602). Here we show that asymmetrically patterned supported lipid bilayers in combination with AC electric fields can lead to efficient manipulation of charged components. We demonstrate the concentration and trapping of such components through the use of a “nested trap” and show that this method is capable of yielding an approximately 30-fold increase in the average protein concentration. Upon removal of the field, the material remains trapped for several hours as a result of topographically restricted diffusion. Our results indicate that this method can be used for concentrating and trapping charged membrane components while they are still within their membranous environment. We anticipate that our approach could find widespread application in the manipulation and study of membrane proteins
The headgroup orientation of dimyristoylphosphatidylinositol-4-phosphate in mixed lipid bilayers: a neutron diffraction study
AbstractThe trisodium salt of dimyristoylphosphatidylinositol-4-phosphate (DMPI-4P) has been synthesised specifically deuterated at particular sites in the headgroup. These materials have been used in neutron diffraction experiments, which successfully located the position (depth) of each of these deuterated sites to within ±0.5 Å in a mixed model membrane (a 1:1 molar mixture of DMPI-4P with dimyristoyl-phosphatidylcholine, DMPC, in the Lα phase, hydrated to the level of 28 water molecules per lipid molecule). The diffracted intensities were measured at four different D2O/H2O ratios and six orders of diffraction were obtained. These data sets, in conjunction with computer modelling, have been used to determine the orientation of the inositol ring of DMPI-4P, localising each vertical H–H distance to within approximately ±0.03 Å. The orientation of the inositol ring is found to be one in which the C5 hydroxyl is extended out into the aqueous medium. This is, therefore, the most accessible site for water-borne reagents. This may be significant for the important pathway leading from PI-4P to PI-4,5P2. On the assumption that the P/ODAG bond is orientated parallel to the bilayer normal, these results are consistent with two possible conformations for the portion of the headgroup connecting the diacylglycerol to the inositol ring. Distinction between these two is difficult, but one may be favoured since the other involves close atom–atom contacts
High One-Dimensional Charge Mobility in Semiconducting Columnar Mesophases of Isocyano-Triphenylene Metal Complexes
Producción CientíficaThis paper reports the synthesis, liquid crystal behavior, and charge-transport properties in the mesophase of isocyano-triphenylene gold, copper, palladium, and platinum complexes [MX(CNR)] (CNR = 2-(6-(4-isocyanophenoxy)hexyloxy)-3,6,7,10,11-pentakisdodecyloxytriphenylene; M = Au, X = Cl, C6F5, C6F4OC10H21, CN; M = Cu, X = Cl), [(μ-4,4′-C6F4C6F4){Au(CNR)}2], [(μ-Cl2){Cu(CNR)2}2], and [MX2(CNR)2] (M = Pd, Pt; X = Cl, Br, I, and M = Pt, X = CN). The thermal and electronic properties of these materials are modulated by the metal fragment. The complexes that display columnar mesomorphism are those that support more than one triphenylene per molecule or those that produce a similar effect by dipole–dipole interactions between the metal groups. These circumstances improve the balance of favorable enthalpic interactions versus unfavorable entropic contributions into a columnar stacking. Hybrid inorganic/organic dual columnar mesophases with high SCLC hole mobility along the columnar stacking, above 1 cm2 V–1 s–1, have been found. It is worth noting that the dicyanoplatinum complex displays mesophase phosphorescence based on Pt···Pt interactions.Ministerio de Ciencia e Innovación (Proyect CTQ2014-52796-P
- …