Efficient preparation of TMSCCl2Br and its use in dichlorocyclopropanation of electron deficient alkenes

The reaction of excess TMSCl and LiCCl2Br at low temperature is a technically simple high yield route to TMSCCl2Br. The latter is a stable source of the dichlorobromomethide carbanion, which undergoes 1,4-addition with cyclic nitroalkenes and (E)-fumarates leading to dichlorocyclopropanes after bromide explusion. For nitrostyrenes the reaction arrests at the 1,4-addition product. Low temperature NMR studies and DFT calculations suggest the formation of an ‘ate’ species [(nitronate)SiFMe3]- which, upon boil off of TMSF at 10 - 20 °C, yields the cyclopropane. DFT calculations also support the experimental differences between fluoride and acetate as promotors

Anionic sigmatropic-electrocyclic-Chugaev cascades: accessing 12-aryl-5-(methylthiocarbonylthio)tetracenes and a related anthra[2,3-b]thiophene

1,4-Diols resulting from the double addition of ArCCLi (Ar = Ph, substituted phenyl, 2-thienyl) to ortho-C6H4(CHO)2 undergo cascades to tetracenes on simple admixture of LiHDMS, CS2 and MeI. Acene formation proceeds by [3,3]-sigmatropic rearrangement of xanthate anions followed by 6π electrocyclisations. The reactions are terminated by E2 or anionic Chugaev-type eliminations. Structural packing motifs and electronic properties are reported for the tetracenes

Development of dual anti-biofilm and anti-bacterial medical devices

The rising occurrence of antimicrobial resistance demands new strategies for delivering antibiotics to ensure their effective use. In this study, a multi-functional strategy to address medical device associated infections is explored whereby an anti-attachment and an antibacterial mechanism have been combined. Silicone catheters impregnated with multiple antibiotics are coated with polyacrylate coatings previously shown to reduce bacterial attachment and biofilm formation. Antibiotics are delivered through the applied coating and the delivery rate depends on the coating thickness and the calculated log P. Coated devices achieve a zone of inhibition and TK100 to Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus similar to those of uncoated devices, whilst maintaining anti-attachment properties. No adverse immunological responses of the coatings were observed. The multi-functional nature of the device developed in the study represents an important approach to combatting medical device associated infections

Lifestyle Risk Factors and Cardiovascular Disease in Cubans and Cuban Americans

Cardiovascular disease is the leading cause of mortality in Cuba. Lifestyle risk factors for coronary heart disease (CHD) in Cubans have not been compared to risk factors in Cuban Americans. Articles spanning the last 20 years were reviewed. The data on Cuban Americans are largely based on the Hispanic Health and Nutrition Examination Survey (HHANES), 1982–1984, while more recent data on epidemiological trends in Cuba are available. The prevalence of obesity and type 2 diabetes mellitus remains greater in Cuban Americans than in Cubans. However, dietary preferences, low physical activity, and tobacco use are contributing to the rising rates of obesity, type 2 diabetes mellitus, and CHD in Cuba, putting Cubans at increased cardiovascular risk. Comprehensive national strategies for cardiovascular prevention that address these modifiable lifestyle risk factors are necessary to address the increasing threat to public health in Cuba

Synthesis of methacrylate-terminated block copolymers with reduced transesterification by controlled ring-opening polymerization

This work presents a robust method to achieve the synthesis of low molecular weight polyesters 26 via ring-opening polymerization (ROP) initiated by 2-hydroxyethyl-methacrylate (HEMA) 27 when using triazabicyclodecene (TBD) as catalyst. The effect that the HEMA:TBD ratio has 28 upon the final reaction rate and final polymer molecular architecture is discussed. The optimum 29 HEMA:TBD ratio and reaction conditions required to minimize competing transesterification 30 reactions were determined, in order to synthesize successfully the target ROP macromonomer 31 species containing only a single 2-methacryloyloxyethyl end-group. Additionally, to confirm 32 the terminal end-group fidelity of the product macromonomers and confirm TBD utility for 33 block copolymer manufacture, a small series of di-block polyesters were synthesized using 34 TBD and shown to exhibit good control over the final polymer structure whilst negating the 35 side transesterification reactions, irrespective of the monomers used

Polymer microparticles with defined surface chemistry and topography mediate the formation of stem cell aggregates and cardiomyocyte function

Surface-functionalized microparticles are relevant to fields spanning engineering and biomedicine, with uses ranging from cell culture to advanced cell delivery. Varying topographies of biomaterial surfaces are also being investigated as mediators of cell-material interactions and subsequent cell fate. To investigate competing or synergistic effects of chemistry and topography in three-dimensional (3D) cell cultures, methods are required to introduce these onto microparticles without modification of their underlying mor-phology or bulk properties. In this study, a new approach for surface functionalization of poly(lactic acid) (PLA) microparticles is reported that allows decoration of the outer shell of the polyesters with additional polymers via aqueous atom transfer radical polymerization (ATRP) routes. PLA microparticles with smooth or dimpled surfaces were functionalized with poly(poly(ethylene glycol) methacrylate) (pPEG-MA) and poly[N-(3-aminopropyl)methacrylamide] (pAPMA) brushes, chosen for their potential abilities to mediate cell adhesion. X-ray Photoelectron Spectroscopy (XPS) and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) analysis indicated homogeneous coverage of the microparticles with pol-ymer brushes while maintaining the original topographies. These materials were used to investigate the relative importance of surface chemistry and topography both on the formation of human immortalized mesenchymal stem cell (hiMSCs) particle-cell aggregates and on the enhanced contractility of cardiomyo-cytes derived from human induced pluripotent stem cells (hiPSC-CMs). The influence of surface chemis-try was found to be more important on the size of particle-cell aggregates than topographies. In addition, surface chemistries that best promoted hiMSC attachment also improved hiPSC-CM attachment and con-tractility. These studies demonstrated a new route to obtain topo-chemical combinations on polyester-based biomaterials, and provided clear evidence for the predominant effect of surface functionality over micron-scale dimpled topography in cell-microparticle interactions. These findings thus provide new guiding principles for the design of biomaterial interfaces to direct cell function

Understanding anionic Chugaev elimination in pericyclic tetracene formation

The reaction pathway for the formation of tetracenes from the diols 1,2-C6H4(CHOHC≡CAr)2 , LiHDMS, CS2 and MeI has been modelled by computational methods at the CBS-QB3 level of theory. Comparison of PhCHOC(=S)YCCPh (Y = S- or SMe) indicates a slight kinetic advantage for the anionic system towards [3,3]-sigmatropic rearrangement [Eact(calc.) 19.7 vs 21.8 kcal mol-1]. Using anthracene-based models, 10-{SC(=O)Y}-4a,10-dihydroanthracene (Y = S- or SMe), allows direct comparison of both syn and anti-manifolds in the neutral vs. anionic Chugaev elimination. Syn elimination of [HSC(=O)S]- is distinctly favoured [Eact(calc.) 11.4 kcal mol-1] vs. syn elimination of neutral methylated HSC(=O)SMe [Eact(calc.) 27.5 kcal mol-1]. The smaller barrier to syn elimination of the anionic leaving group is in accord with the low temperature conditions required for this Chugaev reaction (60 oC) and suggests a general advantage in carrying out Chugaev eliminations in anionic manifolds

Discovery of (meth)acrylate polymers that resist colonization by fungi associated with pathogenesis and biodeterioration

© 2020 The Authors. Fungi have major, negative socioeconomic impacts, but control with bioactive agents is increasingly restricted, while resistance is growing. Here, we describe an alternative fungal control strategy via materials operating passively (i.e., no killing effect). We screened hundreds of (meth)acrylate polymers in high throughput, identifying several that reduce attachment of the human pathogen Candida albicans, the crop pathogen Botrytis cinerea, and other fungi. Specific polymer functional groups were associated with weak attachment. Low fungal colonization materials were not toxic, supporting their passive, anti-attachment utility. We developed a candidate monomer formulation for inkjet-based 3D printing. Printed voice prosthesis components showed up to 100% reduction in C. albicans biofilm versus commercial materials. Furthermore, spray-coated leaf surfaces resisted fungal infection, with no plant toxicity. This is the first high-throughput study of polymer chemistries resisting fungal attachment. These materials are ready for incorporation in products to counteract fungal deterioration of goods, food security, and health

multifunctional bioinstructive 3d architectures to modulate cellular behavior

n/

Discovery of a Novel Polymer for Xeno-Free, Long-Term Culture of Human Pluripotent Stem Cell Expansion

Human pluripotent stem cells (hPSCs) can be expanded and differentiated in vitro into almost any adult tissue cell type, and thus have great potential as a source for cell therapies with biomedical application. In this study, a fully-defined polymer synthetic substrate is identified for hPSC culture in completely defined, xenogenic (xeno)-free conditions. This system can overcome the cost, scalability, and reproducibility limitations of current hPSC culture strategies, and facilitate large-scale production. A high-throughput, multi-generational polymer microarray platform approach is used to test over 600 unique polymers and rapidly assess hPSC-polymer interactions in combination with the fully defined xeno-free medium, Essential 8 (E8). This study identifies a novel nanoscale phase separated blend of poly(tricyclodecane-dimethanol diacrylate) and poly(butyl acrylate) (2:1 v/v), which supports long-term expansion of hPSCs and can be readily coated onto standard cultureware. Analysis of cell-polymer interface interactions through mass spectrometry and integrin blocking studies provides novel mechanistic insight into the role of the E8 proteins in promoting integrin-mediated hPSC attachment and maintaining hPSC signaling, including ability to undergo multi-lineage differentiation. This study therefore identifies a novel substrate for long-term serial passaging of hPSCs in serum-free, commercial chemically-defined E8, which provides a promising and economic hPSC expansion platform for clinical-scale application