2,133 research outputs found
Recommended from our members
Effects of cyclic adenosine 3,5-monophosphate on photoreceptor disc shedding and retinomotor movement. Inhibition of rod shedding and stimulation of cone elongation.
As a test of the hypothesis that cyclic nucleotides play a role in the regulation of retinomotor movements and disc shedding in the photoreceptor-pigment epithelial complex, we have used an in vitro eyecup preparation that sustains both disc shedding and cone retinomotor movements, Eyecups were prepared in white light from animals in which both shedding and cone movement had been blocked by 4 d of constant-light treatment. In eyecups incubated for 3 h in light, disc shedding was negligible and cones remained in the light-adapted (contracted) position. In eyecups incubated in darkness, however, a massive shedding response (dominated by rod photoreceptors) was induced, and at the same time cone photoreceptors elongated to their dark-adapted position. In eyecups incubated in light dbcAMP promoted cone elongation and thus mimicked darkness; the dbcAMP effect was potentiated by the phosphodiesterase inhibitors papaverine and 3-isobutylmethylxanthine. In eyecups incubated in darkness, on the other hand, both phosphodiesterase inhibitors and dbcAMP reduced the phagosome content of the pigment epithelium. The effects of dbcAMP on the cone elongation and rod shedding appear to be specific in that dbcGMP, adenosine, and adenosine 5-monophosphate had no significant effect. Our results suggest that cAMP plays a role in the regulation of both retinomotor movements and disc shedding
Computer analysis of aircraft and shuttle antennas
Progress on predicting the patterns of high-frequency antennas on aircraft and shuttles is reported. Patterns are presented for an axial slot antenna on a circular cylinder partially coated with a dielectric layer. Results are shown for Omega signal disturbance by a conducting vertical pole
Preliminary investigation on temperature, chemistry and isotopes of mine water pumped in Bytom geological basin (USCB,Southern Poland) as a potential geothermal energy source
Mine water from both operating and abandoned mines can be used for individual space heating projects, district heating/cooling systems or for preheating air for mine ventilation. Examples of such applications are already known from Canada, US, Netherlands, UK, and Spain. The Upper Silesian Coal Basin (USCB) in Poland, where 34 of 65 hard coal mines have been abandoned since 1989, represents a potentially large opportunity for mine water heating schemes. This paper describes the mines from Bytom (northern USCB) as a potential location for ground source heat extraction projects. Hydrogeological and hydrogeochemical studies of pumped waters have been carried out in order to better understand the potential of the Bytom heat resource. The monitoring program is still ongoing, but initial results compare favorably with existing mine water geothermal source systems where water temperatures are comparable or lower than those found at Bytom. Initial hydrochemical and isotope data demonstrate stability in water composition at most of the monitoring points. These data elucidate the hydrogeological cycle during active dewatering and provide a baseline for understanding the geothermal behavior of the system, which is crucial for optimizing heat extraction. Preliminary results also reveal very stable mine water temperatures in the pumped, and hydrologically connected, Szombierki system and suggest remarkable stability in the characteristics of the main hydrothermal reservoirs
Development of lightweight fire retardant, low-smoke, high-strength, thermally stable aircraft floor paneling
Fire resistance mechanical property tests were conducted on sandwich configurations composed of resin-fiberglass laminates bonded with adhesives to Nomex honeycomb core. The test results were compared to proposed and current requirements for aircraft floor panel applications to demonstrate that the fire safety of the airplane could be improved without sacrificing mechanical performance of the aircraft floor panels
DDS-Suite - A Dynamic Data Acquisition, Processing, and Analysis System for Wind Tunnel Testing
Wind Tunnels have optimized their steady-state data systems for acquisition and analysis and even implemented large dynamic-data acquisition systems, however development of near real-time processing and analysis tools for dynamic-data have lagged. DDS-Suite is a set of tools used to acquire, process, and analyze large amounts of dynamic data. Each phase of the testing process: acquisition, processing, and analysis are handled by separate components so that bottlenecks in one phase of the process do not affect the other, leading to a robust system. DDS-Suite is capable of acquiring 672 channels of dynamic data at rate of 275 MB / s. More than 300 channels of the system use 24-bit analog-to-digital cards and are capable of producing data with less than 0.01 of phase difference at 1 kHz. System architecture, design philosophy, and examples of use during NASA Constellation and Fundamental Aerodynamic tests are discussed
Design of blended rolled edges for compact range main reflectors
A procedure to design blended rolled edge terminations for arbitrary rim shape compact range main reflectors is presented. The reflector may be center-fed or offset-fed. The design procedure leads to a reflector which has a continuous and smooth surface. This procedure also ensures small diffracted fields from the junction between the paraboloid and the blended rolled edge while satisfying certain constraints regarding the maximum height of the reflector and minimum operating frequency of the system. The prescribed procedure is used to design several reflectors and the performance of these reflectors is presented
Roll plane analysis of on-aircraft antennas
Roll plane radiation patterns of on-aircraft antennas are analyzed using high frequency solutions. Aircraft-antenna pattern performance in which the aircraft is modelled in its most basic form is presented. The fuselage is assumed to be a perfectly conducting elliptic cylinder with the antennas mounted near the top or bottom. The wings are simulated by arbitrarily many sided flat plates and the engines by circular cylinders. The patterns in each case are verified by measured results taken on simple models as well as scale models of actual aircraft
Dynamics of the nighttime thermosphere at Arecibo
Incoherent scatter radar observations of the nighttime F layer at Arecibo, Puerto Rico, are used to determine the O+ diffusion velocity at different altitudes. Further analysis allows evaluation of the neutral wind and the ion-drag force in the direction of the magnetic meridian. The local acceleration of the meridional neutral wind is also determined. The possibility of evaluating the viscous force using incoherent scatter radar data was also investigated. Preliminary results indicate that, at certain times and at altitudes above about 350 km, viscous drag may be a significant term in the neutral equation of motion. Combining these results allows height profiles of the meridional pressure gradient to be deduced. The pressure gradients thus derived is compared with that determined from measurements of the horizontal temperature gradient and that given by the MSIS model atmosphere
AMELIA CESTOL Test: Acoustic Characteristics of Circulation Control Wing with Leading-and Trailing-Edge Slot Blowing
Aeroacoustic measurements of the 11 % scale full-span AMELIA CESTOL model with leading- and trailing-edge slot blowing circulation control (CCW) wing were obtained during a recent test in the Arnold Engineering Development Center 40- by 80-Ft. Wind Tunnel at NASA Ames Research Center, Sound levels and spectra were acquired with seven in-flow microphones and a 48-element phased microphone array for a variety of vehicle configurations, CCW slot flow rates, and forward speeds, Corrections to the measurements and processing are in progress, however the data from selected configurations presented in this report confirm good measurement quality and dynamic range over the test conditions, Array beamform maps at 40 kts tunnel speed show that the trailing edge flap source is dominant for most frequencies at flap angles of 0deg and 60deg, The overall sound level for the 60deg flap was similar to the 0deg flap for most slot blowing rates forward of 90deg incidence, but was louder by up to 6 dB for downstream angles, At 100 kts, the in-flow microphone levels were louder than the sensor self-noise for the higher blowing rates, while passive and active background noise suppression methods for the microphone array revealed source levels as much as 20 dB lower than observed with the in-flow microphones
- …