19,780 research outputs found
Endurance test and evaluation of alkaline water electrolysis cells
Utilization in the development of multi-kW low orbit power systems is discussed. The following technological developments of alkaline water electrolysis cells for space power application were demonstrated: (1) four 92.9 cm2 single water electrolysis cells, two using LST's advanced anodes and two using LST's super anodes; (2) four single cell endurance test stands for life testing of alkaline water electrolyte cells; (3) the solid performance of the advanced electrode and 355 K; (4) the breakthrough performance of the super electrode; (5) the four single cells for over 5,000 hours each significant cell deterioration or cell failure. It is concluded that the static feed water electrolysis concept is reliable and due to the inherent simplicity of the passive water feed mechanism coupled with the use of alkaline electrolyte has greater potential for regenerative fuel cell system applications than alternative electrolyzers. A rise in cell voltage occur after 2,000-3,000 hours which was attributed to deflection of the polysulfone end plates due to creepage of the thermoplastic. More end plate support was added, and the performance of the cells was restored to the initial performance level
Improved charge injection device and a focal plane interface electronics board for stellar tracking
An improved Charge Injection Device (CID) stellar tracking sensor and an operating sensor in a control/readout electronics board were developed. The sensor consists of a shift register scanned, 256x256 CID array organized for readout of 4x4 subarrays. The 4x4 subarrays can be positioned anywhere within the 256x256 array with a 2 pixel resolution. This allows continuous tracking of a number of stars simultaneously since nine pixels (3x3) centered on any star can always be read out. Organization and operation of this sensor and the improvements in design and semiconductor processing are described. A hermetic package incorporating an internal thermoelectric cooler assembled using low temperature solders was developed. The electronics board, which contains the sensor drivers, amplifiers, sample hold circuits, multiplexer, analog to digital converter, and the sensor temperature control circuits, is also described. Packaged sensors were evaluated for readout efficiency, spectral quantum efficiency, temporal noise, fixed pattern noise, and dark current. Eight sensors along with two tracker electronics boards were completed, evaluated, and delivered
Excitations in time-dependent density-functional theory
An approximate solution to the time-dependent density functional theory
(TDDFT) response equations for finite systems is developed, yielding
corrections to the single-pole approximation. These explain why allowed
Kohn-Sham transition frequencies and oscillator strengths are usually good
approximations to the true values, and why sometimes they are not. The
approximation yields simple expressions for G\"orling-Levy perturbation theory
results, and a method for estimating expectation values of the unknown
exchange-correlation kernel.Comment: 4 pages, 1 tabl
Analysis of GOES imagery and digitized data for the SEV-UPS period, August 1979
In support of the Southeastern Virginia Urban Plume Study (SEV-UPS), GOES satellite imagery was analyzed for the month of August 1979. The analyzed GOES images provide an additional source of meteorological input useful in the evaluation of air quality data collected during the month long period of the SEV-UPS experiment. In addition to the imagery analysis, GOES digitized data were analyzed for the period of August 6 to 11, during which a regional haze pattern was detectable in the imagery. The results of the study indicate that the observed haze patterns correspond closely with areas shown in surface based measurements to have reduced visibilities and elevated pollution levels. Moreover, the results of the analysis of digitized data indicate that digital reflectance counts can be directly related to haze intensity both over land and ocean. The model results agree closely with the observed GOES digital reflectance counts, providing further indication that satellite remote sensing can be a useful tool for monitoring regional elevated pollution episodes
A Component Based Heuristic Search Method with Evolutionary Eliminations
Nurse rostering is a complex scheduling problem that affects hospital
personnel on a daily basis all over the world. This paper presents a new
component-based approach with evolutionary eliminations, for a nurse scheduling
problem arising at a major UK hospital. The main idea behind this technique is
to decompose a schedule into its components (i.e. the allocated shift pattern
of each nurse), and then to implement two evolutionary elimination strategies
mimicking natural selection and natural mutation process on these components
respectively to iteratively deliver better schedules. The worthiness of all
components in the schedule has to be continuously demonstrated in order for
them to remain there. This demonstration employs an evaluation function which
evaluates how well each component contributes towards the final objective. Two
elimination steps are then applied: the first elimination eliminates a number
of components that are deemed not worthy to stay in the current schedule; the
second elimination may also throw out, with a low level of probability, some
worthy components. The eliminated components are replenished with new ones
using a set of constructive heuristics using local optimality criteria.
Computational results using 52 data instances demonstrate the applicability of
the proposed approach in solving real-world problems.Comment: 27 pages, 4 figure
Continuum states from time-dependent density functional theory
Linear response time-dependent density functional theory is used to study
low-lying electronic continuum states of targets that can bind an extra
electron. Exact formulas to extract scattering amplitudes from the
susceptibility are derived in one dimension. A single-pole approximation for
scattering phase shifts in three dimensions is shown to be more accurate than
static exchange for singlet electron-He scattering.Comment: 5 pages, 2 figures, J. Chem. Phys. accepte
Recent developments in CID imaging
Readout of CID imaging arrays was first performed by injecting and detecting the signal charge from each sensing site in sequence. A new readout method, termed parallel injection, has been developed in which the functions of signal charge detection and injection have been separated. The level of signal charge at each sensing site is detected during a line scan, and during the line retrace interval, all charge in the selected line is injected. The parallel injection technique is well adapted to TV scan formats in that the signal is read out at high speed, line by line. A 244 line by 248 element TV compatible imager, employing this technique and including an on chip preamplifier, has been constructed and operation demonstrated
Static Feed Water Electrolysis Subsystem Testing and Component Development
A program was carried out to develop and test advanced electrochemical cells/modules and critical electromechanical components for a static feed (alkaline electrolyte) water electrolysis oxygen generation subsystem. The accomplishments were refurbishment of a previously developed subsystem and successful demonstration for a total of 2980 hours of normal operation; achievement of sustained one-person level oxygen generation performance with state-of-the-art cell voltages averaging 1.61 V at 191 ASF for an operating temperature of 128F (equivalent to 1.51V when normalized to 180F); endurance testing and demonstration of reliable performance of the three-fluid pressure controller for 8650 hours; design and development of a fluid control assembly for this subsystem and demonstration of its performance; development and demonstration at the single cell and module levels of a unitized core composite cell that provides expanded differential pressure tolerance capability; fabrication and evaluation of a feed water electrolyte elimination five-cell module; and successful demonstration of an electrolysis module pressurization technique that can be used in place of nitrogen gas during the standby mode of operation to maintain system pressure and differential pressures
Evaluation of the effects of varying moisture contents on microwave thermal emissions from agriculture fields
Three tasks related to soil moisture sensing at microwave wavelengths were undertaken: (1) analysis of data at L, X and K sub 21 band wavelengths over bare and vegetated fields from the 1975 NASA sponsored flight experiment over Phoenix, Arizona; (2) modeling of vegetation canopy at microwave wavelengths taking into consideration both absorption and volume scattering effects; and (3) investigation of overall atmospheric effects at microwave wavelengths that can affect soil moisture retrieval. Data for both bare and vegetated fields are found to agree well with theoretical estimates. It is observed that the retrieval of surface and near surface soil moisture information is feasible through multi-spectral and multi-temporal analysis. It is also established that at long wavelengths, which are optimal for surface sensing, atmospheric effects are generally minimal. At shorter wavelengths, which are optimal for atmosheric retrieval, the background surface properties are also established
- …