Technology review of flight crucial flight controls

The results of a technology survey in flight crucial flight controls conducted as a data base for planning future research and technology programs are provided. Free world countries were surveyed with primary emphasis on the United States and Western Europe because that is where the most advanced technology resides. The survey includes major contemporary systems on operational aircraft, R&D flight programs, advanced aircraft developments, and major research and technology programs. The survey was not intended to be an in-depth treatment of the technology elements, but rather a study of major trends in systems level technology. The information was collected from open literature, personal communications and a tour of several companies, government organizations and research laboratories in the United States, United Kingdom, France, and the Federal Republic of Germany

The N.A.C.A. Combustion Chamber Gas-sampling Valve and Some Preliminary Test Results

A gas sampling valve of the inertia-operated type was designed for procuring samples of the gases in the combustion chamber of internal combustion engines at identical points in successive cycles so that the analysis of the gas samples thus procured may aid in the study of the process of combustion. The operation of the valve is described. The valve was used to investigate the CO2 content of gases taken from the quiescent combustion chamber of a high speed compression-ignition engine when operating with two different multiple-orifice fuel injection nozzles. An analysis of the gas samples thus obtained shows that the state of quiescence in the combustion chamber is maintained during the combustion of the fuel

Is machine learning prediction of Aβ positivity consistent? An assessment of multiple datasets

Poster abstrac

Stereoelectronic effects on the binding of neutral Lewis bases to CdSe nanocrystals

Using P-31 nuclear magnetic resonance (NMR) spectroscopy, we monitor the competition between tri-nbutylphosphine (Bu3P) and various amine and phosphine ligands for the surface of chloride terminated CdSe nanocrystals. Distinct P-31 NMR signals for free and bound phosphine ligands allow the surface ligand coverage to be measured in phosphine solution. Ligands with a small steric profile achieve higher surface coverages (Bu3P = 0.5 nm(-2), Me2P-n-octyl = 2.0 nm(-2), NH2Bu = >3 nm(-2)) and have greater relative binding affinity for the nanocrystal (binding affinity: Me3P > Me2P -n-octyl similar to Me2P -n-octadecyl > Et3P > Bu3P). Among phosphines, only Bu 3 P and Me2P-n-octyl support a colloidal dispersion, allowing a relative surface binding affinity (K-rel) to be estimated in that case (K-rel = 3.1). The affinity of the amine ligands is measured by the extent to which they displace Bu3P from the nanocrystals (K-rel: H2NBu similar to N-n-butylimidazole > 4-ethylpyridine > Bu3P similar to HNBu2 > Me2NBu > Bu3N). The affinity for the CdSe surface is greatest among soft, basic donors and depends on the number of each ligand that bind. Sterically unencumbered ligands such as imidazole, pyridine, and n-alkylamines can therefore outcompete stronger donors such as alkylphosphines. The influence of repulsive interactions between ligands on the binding affinity is a consequence of the high atom density of binary semiconductor surfaces. The observed behavior is distinct from the self-assembly of straight-chain surfactants on gold and silver where the ligands are commensurate with the underlying lattice and attractive interactions between aliphatic chains strengthen the binding

A Preliminary Motion-picture Study of Combustion in a Compression-ignition Engine

Motion pictures were taken at 1,850 frames per second of the spray penetration and combustion occurring in the N.A.C.A. combustion apparatus arranged to operate as a compression-ignition engine. Indicator cards were taken simultaneously with the motion pictures by means of the N.A.C.A. optical indicator. The motion pictures showed that when ignition occurred during injection it started in the spray envelope. If ignition occurred after injection cut-off, however, and after considerable mixing had taken place, it was impossible to predict where the ignition would start. The pictures also showed that ignition usually started at several points in the combustion chamber. With this apparatus, as the injection advance angle increased from 0 degrees to 40 degrees before top center, the rate of flame spread increased and the duration of the burning decreased

Life-cycle assessments in the South African water sector: A review and future challenges

This paper reviews South African water sector life-cycle assessments (LCAs) and develops a position on how this tool could be strategically employed in the future. It summarises the studies undertaken, highlighting the significant findings and the lessons learnt. In addition, international trends and their implications for the local LCA community and the water sector are presented and strategic recommendations for the future are included. The various LCA studies undertaken in the local water industry have shown that the abstraction of water from the environment (in a country where it is a limited resource) and the use of energy for treating and pumping water and wastewater have the highest environmental burdens. These studies have also demonstrated the versatility of LCA as a decision-making tool in the water industry by comparing technologies and scenarios, identifying improvement opportunities and prioritising interventions and their consequences in complex water systems. Recent international work has confirmed the usefulness of a life-cycle approach also for water footprinting. Therefore, in South Africa it is important to promote the use of LCAs for the water sector in order to improve efficiency of processes and systems, but also to promote life-cycle based water footprinting and to include differentiated water consumption data into life-cycle inventories to make more efficient use of water as a resource.Keywords: life cycle assessments, water footprinting, urban water system

Global adaptation in networks of selfish components: emergent associative memory at the system scale

In some circumstances complex adaptive systems composed of numerous self-interested agents can self-organise into structures that enhance global adaptation, efficiency or function. However, the general conditions for such an outcome are poorly understood and present a fundamental open question for domains as varied as ecology, sociology, economics, organismic biology and technological infrastructure design. In contrast, sufficient conditions for artificial neural networks to form structures that perform collective computational processes such as associative memory/recall, classification, generalisation and optimisation, are well-understood. Such global functions within a single agent or organism are not wholly surprising since the mechanisms (e.g. Hebbian learning) that create these neural organisations may be selected for this purpose, but agents in a multi-agent system have no obvious reason to adhere to such a structuring protocol or produce such global behaviours when acting from individual self-interest. However, Hebbian learning is actually a very simple and fully-distributed habituation or positive feedback principle. Here we show that when self-interested agents can modify how they are affected by other agents (e.g. when they can influence which other agents they interact with) then, in adapting these inter-agent relationships to maximise their own utility, they will necessarily alter them in a manner homologous with Hebbian learning. Multi-agent systems with adaptable relationships will thereby exhibit the same system-level behaviours as neural networks under Hebbian learning. For example, improved global efficiency in multi-agent systems can be explained by the inherent ability of associative memory to generalise by idealising stored patterns and/or creating new combinations of sub-patterns. Thus distributed multi-agent systems can spontaneously exhibit adaptive global behaviours in the same sense, and by the same mechanism, as the organisational principles familiar in connectionist models of organismic learning

Technology review of flight crucial flight control systems (application of optical technology)

The survey covers the various optical elements that are considered in a fly-by-light flight control system including optical sensors and transducers, optical data links, so-called optical actuators, and optical/electro-optical processing. It also addresses airframe installation, maintenance, and repair issues. Rather than an in-depth treatment of optical technology, the survey concentrates on technology readiness and the potential advantages/disadvantages of applying the technology. The information was assembled from open literature, personal interviews, and responses to a questionnaire distributed specifically for this survey. Not all of the information obtained was consistent, particularly with respect to technology readiness. The synthesis of information into the perception of the state-of-technology is presented

Assessing users’ experience of shared sanitation facilities: A case study of community ablution blocks in Durban, South Africa

Despite significant financial investment, the effective implementation and sustained use of water and sanitation (WATSAN) technologies remains a chimera, with one billion people using unimproved water facilities and two and a half billion not benefitting from adequate sanitation. The poor success rate of WATSAN interventions results from a predominance of supply-driven approaches which lack recipients’ inputs into planning and implementation to ensure that technologies are fully absorbed and adapted to users’ needs. In the academic literature, users’ feedback and experiences of technologies in the post-implementation phase have received scarce attention. The purpose of this study is to investigate users’ experience of sanitation technologies in the early post-implementation phase, when opportunities for remedial intervention are still available. Fieldwork comprising semi-structured interviews was undertaken with users and potential recipients of three community ablution blocks (CABs) in informal settlements around Durban. Results suggest that non-technical aspects such as affordability or cleanliness of the facilities can affect acceptance among the investigated communities. User training is positively associated with higher levels of facility maintenance as well as satisfaction with its functionality. A comparison between users and potential recipients of CABs shows that perceived health benefits, attitudes in case of  problems, and trust are affected by use of the facilities. Conclusions relate to how early post-implementation assessments of users’ experiencecould enhance the process of acceptance and management of the technology, thereby increasing progress towards achievement of the related Millenium Development Goals.Keywords: Ablution blocks, user acceptance, eThekwini municipality, Durban, sanitatio

A Resonant soft x-ray powder diffraction study to determine the orbital ordering in A-site ordered SmBaMn2O6

Soft X-ray resonant powder diffraction has been performed at the Mn L2,3 edges of A-site ordered SmBaMn2O6. The energy and polarization dependence of the (1/2 1/2 0) reflection provide direct evidence for a (x2-z2)/(y2-z2) type orbital ordering in contrast to the single layer manganite. The temperature dependence of the reflection indicates an orbital reorientation transition at 210 K, below which the charge and orbital ordered MnO2 sheets show AAAA type of stacking. The concurring reduction of the ferromagnetic super exchange correlations leads to further charge localization