Domestic thermal upgrades, community action and energy saving: a three-year experimental study of prosperous households

A three-year field experiment was conducted with 185 prosperous households to assess whether behavioural interventions by a community environmental group during and after thermal upgrades (cavity wall and/or loft insulation) can achieve reductions in households’ energy use, including reductions in direct and indirect rebound. The engineering interventions on the thermal efficiency of dwellings appear effective in reducing energy use in both treatment and control groups: a direct rebound effect is estimated to be at most 40 per cent from the engineering interventions. However, across a range of measures of energy use, we observe no significant effect of the community behavioural intervention across the total lifetime of the project. Qualitative data collected on similar community groups suggests substantial constraints on their capacity to realise reductions in energy use amongst households

Grading hampers cooperative information sharing in group problem solving

We hypothesized that individual grading in group work, a widespread practice, hampers information sharing in cooperative problem solving. Experiment 1 showed that a condition in which members' individual contribution was expected to be visible and graded, as in most graded work, led to less pooling of relevant, unshared information and more pooling of less-relevant, shared information than two control conditions where individual contribution was not graded, but either visible or not. Experiment 2 conceptually replicated this effect: Group members primed with grades pooled less of their unshared information, but more of their shared information, compared to group members primed with neutral concepts. Thus, grading can hinder cooperative work and impair information sharing in groups.SCOPUS: ar.jinfo:eu-repo/semantics/publishe

Phenotypic redshifts with self-organizing maps: A novel method to characterize redshift distributions of source galaxies for weak lensing

Wide-field imaging surveys such as the Dark Energy Survey (DES) rely on coarse measurements of spectral energy distributions in a few filters to estimate the redshift distribution of source galaxies. In this regime, sample variance, shot noise, and selection effects limit the attainable accuracy of redshift calibration and thus of cosmological constraints. We present a new method to combine wide-field, few-filter measurements with catalogs from deep fields with additional filters and sufficiently low photometric noise to break degeneracies in photometric redshifts. The multi-band deep field is used as an intermediary between wide-field observations and accurate redshifts, greatly reducing sample variance, shot noise, and selection effects. Our implementation of the method uses self-organizing maps to group galaxies into phenotypes based on their observed fluxes, and is tested using a mock DES catalog created from N-body simulations. It yields a typical uncertainty on the mean redshift in each of five tomographic bins for an idealized simulation of the DES Year 3 weak-lensing tomographic analysis of $\sigma_{\Delta z} = 0.007$, which is a 60% improvement compared to the Year 1 analysis. Although the implementation of the method is tailored to DES, its formalism can be applied to other large photometric surveys with a similar observing strategy.Comment: 24 pages, 11 figures; matches version accepted to MNRA

Louisville Seamount Trail: implications for geodynamic mantle flow models and the geochemical evolution of primary hotspots

The Louisville Seamount Trail is a 4300 km long volcanic chain that has been built in the past 80 m.y. as the Pacific plate moved over a persistent mantle melting anomaly or hotspot. Because of its linear morphology and its long-lived age-progressive volcanism, Louisville is the South Pacific counterpart of the much better studied Hawaiian-Emperor Seamount Trail. Together, Louisville and Hawaii are textbook examples of two primary hotspots that have been keystones in deciphering the motion of the Pacific plate relative to a set of "fixed" deep-mantle plumes. However, drilling during Ocean Drilling Program (ODP) Leg 197 in the Emperor Seamounts documented a large ~15° southward motion of the Hawaiian hotspot prior to 50 Ma. Is it possible that the Hawaiian and Louisville hotspots moved in concert and thus constitute a moving reference frame for modeling plate motion in the Pacific? Alternatively, could they have moved independently, as predicted by mantle flow models that reproduce the observed latitudinal motion for Hawaii but that predict a largely longitudinal shift for the Louisville hotspot? These two end-member geodynamic models were tested during Integrated Ocean Drilling Program (IODP) Expedition 330 to the Louisville Seamount Trail. In addition, existing data from dredged lavas suggest that the mantle plume source of the Louisville hotspot has been remarkably homogeneous for as long as 80 m.y. These lavas are predominantly alkali basalts and likely represent a mostly alkalic shield-building stage, which is in sharp contrast to the massive tholeiitic shield-building stage of Hawaiian volcanoes. Geochemical and isotopic data for the recovered lavas during Expedition 330 will provide insights into the magmatic evolution and melting processes of individual Louisville volcanoes, their progression from shield-building to postshield and (maybe) posterosional stages, the temperature and depth of partial melting of their mantle plume source, and the enigmatic long-lived and apparent geochemical homogeneity of the Louisville mantle source. Collectively, this will enable us to characterize the Louisville Seamount Trail as a product of one of the few global primary hotspots, to better constrain its plume-lithosphere interactions, and to further test the hypothesis that the Ontong Java Plateau formed from the plume head of the Louisville mantle plume around 120 Ma. During Expedition 330 we replicated the drilling strategy of Leg 197, the first expedition to provide compelling evidence for the motion of the Hawaiian mantle plume between 80 and 50 Ma. For that reason we targeted Louisville seamounts that have ages similar to Detroit, Suiko, Nintoku, and Koko Seamounts in the Emperor Seamount Trail. In total, five seamounts were drilled in the Louisville Seamount Trail: Canopus, Rigil, Burton, Achernar, and Hadar Guyots (old to young). By analyzing a large number of time-independent in situ lava flows (and other volcanic eruptive products) from these seamounts using modern paleomagnetic, 40Ar/39Ar geochronological, and geochemical techniques, we will be able to directly compare the paleolatitude estimates and geochemical signatures between the two longest-lived hotspot systems in the Pacific Ocean. We drilled into the summits of the five Louisville guyots and reached volcanic basement at four of these drilling targets. In two cases we targeted larger seamount structures and drilled near the flanks of these ancient volcanoes, and in the other three cases we selected smaller edifices that we drilled closer to their centers. Drilling and logging plans for each of these sites were similar, with coring reaching 522.0 meters below seafloor (mbsf) for Site U1374 and 232.9, 65.7, 11.5, 182.8, and 53.3 mbsf for Sites U1372, U1373, U1375, U1376, and U1377, respectively. Some Expedition 330 drill sites were capped with only a thin layer of pelagic ooze between 6.6 and 13.5 m thick, and, if present, these were cored by using a low-rotation gravity-push technique with the rotary core barrel to maximize recovery. However, at Sites U1373 and U1376 no pelagic ooze was present, and the holes needed to be started directly into cobble-rich hardgrounds. In all cases, the bulk of the seamount sediment cover comprised sequences of volcanic sandstones and various kinds of basalt breccia or basalt conglomerate, which often were interspersed with basaltic lava flows, the spatter/tephra products of submarine eruptions, or other volcanic products, including auto-brecciated flows or peperites. Also several intervals of carbonate were cored, with the special occurrence of a ~15 m thick algal limestone reef at Site U1376 on Burton Guyot. In addition, some condensed pelagic limestone units were recovered on three of the other seamounts, but these did not exceed 30 cm in thickness. Despite their limited presence in the drilled sediment, these limestones provide valuable insights for the paleoclimate record at high ~50° southern latitudes since Mesozoic times. Several Louisville sites progressed from subaerial conditions in the top of volcanic basement into submarine eruptive environments, or drilling of the igneous basement immediately started in submarine volcanic sequences, as was the case for Sites U1376 and U1377 on Burton and Hadar Guyots. At three sites we cored >100 m into the igneous basement: 187.3 m at Site U1372, 505.3 m at Site U1374, and 140.9 m at Site U1376. At the other sites we did not core into basement (Site U1375) or we cored only 38.2 m (Site U1377) because of unstable hole conditions. Even so, drilling during Expedition 330 resulted in a large number of in situ lava flows, pillow basalts, or other types of volcanic products such as auto-brecciated lava flows, intrusive sheets or dikes, and peperites. In particular, the three holes on Canopus and Rigil Guyots (the two oldest seamounts drilled in the Louisville Seamount Trail), resulted in adequate numbers of in situ lava flows to average out paleosecular variation, with probable eruption ages estimated at ~78 and 73 Ma, respectively. Remarkably, at all drill sites large quantities of hyaloclastites, volcanic sandstones, and basaltic breccias were also recovered, which in many cases show consistent paleomagnetic inclinations compared to the lava flows bracketing these units. For Site U1374 on Rigil Guyot we also observed a magnetic polarity reversal in the cored sequence. Overall, this is very promising for determining a reliable paleolatitude record for the Louisville Seamounts following detailed postcruise examinations. The deeper penetrations of several hundred meters required bit changes and reentries using free-fall funnels. Basement penetration rates were 1.8–2.5 m/h depending on drill depth. In total, 1114 m of sediment and igneous basement at five seamounts was drilled, and 806 m was recovered (average recovery = 72.4%). At Site U1374 on Rigil Guyot, a total of 522 m was drilled, with a record-breaking 87.8% recovery. Most outstandingly, nearly all Expedition 330 core material is characterized by low degrees of alteration, providing us with a large quantity of samples of mostly well-preserved basalt, containing, for example, pristine olivine crystals with melt inclusions, fresh volcanic glass, unaltered plagioclase, carbonate, zeolite and celadonite alteration minerals, various micro- and macrofossils, and, in one case, mantle xenoliths and xenocrysts. The large quantity and excellent quality of the recovered sample material allow us to address all the scientific objectives of this expedition and beyond

Metamorphosis and Taxonomy of Andreev Bound States

We analyze the spatial and energy dependence of the local density of states in a SNS junction. We model our system as a one-dimensional tight-binding chain which we solve exactly by numerical diagonalization. We calculate the dependence of the Andreev bound states on position, phase difference, gate voltage, and coupling with the superconducting leads. Our results confirm the physics predicted by certain analytical approximations, but reveal a much richer set of phenomena beyond the grasp of these approximations, such as the metamorphosis of the discrete states of the normal link (the normal bound states) into Andreev bound states as the leads become superconducting.Comment: 23 pages, 15 figure