Intrinsic timing properties of ideal 3D-trench silicon sensor with fast front-end electronics

This paper describes the fundamental timing properties of a single-pixel sensor for charged particle detection based on the 3D-trench silicon structure. We derive the results both analytically and numerically by considering a simple ideal sensor and the corresponding fast front-end electronics in two different case scenarios: ideal integrator and real fast electronics (trans-impedance amplifier). The particular shape of the Time of Arrival (TOA) distribution is examined and the relation between the time resolution and the spread of intrinsic charge collection time is discussed, by varying electronics parameters and discrimination thresholds. The results are obtained with and without simulated electronics noise. We show that the 3D-trench sensors are characterized by a $synchronous~region$, i.e. a portion of the active volume which leads to the same TOA values when charged particles cross it. The synchronous region size is dependent on the front-end electronics and discrimination threshold, and the phenomenon represents an intrinsic physical effect that leads to the excellent time resolution of these sensors. Moreover, we show that the TOA distribution is characterized by an intrinsic asymmetry, due to the 3D geometry only, that becomes negligible in case of significant electronics jitter

Atmospheric Newtonian noise modeling for third-generation gravitational wave detectors

The sensitivity and the frequency bandwidth of third-generation gravitational-wave (GW) detectors are such that the Newtonian noise (NN) signals produced by atmospheric turbulence could become relevant. We build models for atmospheric NN that take into account finite correlation times and inhomogeneity along the vertical direction, and are therefore accurate enough to represent a reliable reference tool for evaluating this kind of noise. We compute the NN spectral density from our models and compare it with the expected sensitivity curve of the Einstein Telescope (ET) with the xylophone design. The noise signal decays exponentially for small values of the frequency and the detector's depth, followed by a power-law for large values of the parameters. We find that, when the detector is built at the earth's surface, the NN contribution in the low-frequency band is above the ET sensitivity curve for strong wind. Building the detector underground is sufficient to push the noise signal under the ET sensitivity curve, but the decrement is close to marginal for strong wind. In light of the slow decay with depth of the NN, building the detector underground could be only partially effective as passive noise mitigation.Comment: 17 pages, 8 figure

Medusa, a multithread 4-body decay fitting and simulation software

We present a new C++14 compliant application to perform physics data analyses of generic 4-body decays in massively parallel platforms. Medusa is highly based on Hydra, a header-only library which hides most of the complexities of writing parallel code for different architectures. Medusa has been tested through the measurement of the CP-violating phase ϕsin b-hadron decays exploiting the data collected by the LHCb experiment. Medusa executes the optimization of the full model, running over 500000 events, until 330 times faster than a non-parallelized program. Medusa is freely available on GitHub under GPL v.3.0 license

Notulae to the Italian alien vascular flora: 11

In this contribution, new data concerning the distribution of vascular flora alien to Italy are presented. It includes new records, confirmations, exclusions, and status changes for Italy or for Italian administrative regions. Nomenclatural and distribution updates published elsewhere are provided as Suppl. material 1

Notulae to the Italian alien vascular flora: 12

In this contribution, new data concerning the distribution of vascular flora alien to Italy are presented. It includes new records, confirmations, exclusions, and status changes for Italy or for Italian administrative regions. Nomenclatural and distribution updates published elsewhere are provided as Suppl. material 1

Notulae to the Italian alien vascular flora: 14

In this contribution, new data concerning the distribution of vascular flora alien to Italy are presented. It includes new records, confirmations, and status changes for Italy or for Italian administrative regions. Nomenclatural and distribution updates, published elsewhere, and corrections are provided as Suppl. material

Notulae to the Italian alien vascular flora: 14

In this contribution, new data concerning the distribution of vascular flora alien to Italy are presented. It includes new records, confirmations, and status changes for Italy or for Italian administrative regions. Nomenclatural and distribution updates, published elsewhere, and corrections are provided as Suppl. materia

Physics case for an LHCb Upgrade II - Opportunities in flavour physics, and beyond, in the HL-LHC era

The LHCb Upgrade II will fully exploit the flavour-physics opportunities of the HL-LHC, and study additional physics topics that take advantage of the forward acceptance of the LHCb spectrometer. The LHCb Upgrade I will begin operation in 2020. Consolidation will occur, and modest enhancements of the Upgrade I detector will be installed, in Long Shutdown 3 of the LHC (2025) and these are discussed here. The main Upgrade II detector will be installed in long shutdown 4 of the LHC (2030) and will build on the strengths of the current LHCb experiment and the Upgrade I. It will operate at a luminosity up to 2×1034 cm−2s−1, ten times that of the Upgrade I detector. New detector components will improve the intrinsic performance of the experiment in certain key areas. An Expression Of Interest proposing Upgrade II was submitted in February 2017. The physics case for the Upgrade II is presented here in more depth. CP-violating phases will be measured with precisions unattainable at any other envisaged facility. The experiment will probe b → sl+l−and b → dl+l− transitions in both muon and electron decays in modes not accessible at Upgrade I. Minimal flavour violation will be tested with a precision measurement of the ratio of B(B0 → μ+μ−)/B(Bs → μ+μ−). Probing charm CP violation at the 10−5 level may result in its long sought discovery. Major advances in hadron spectroscopy will be possible, which will be powerful probes of low energy QCD. Upgrade II potentially will have the highest sensitivity of all the LHC experiments on the Higgs to charm-quark couplings. Generically, the new physics mass scale probed, for fixed couplings, will almost double compared with the pre-HL-LHC era; this extended reach for flavour physics is similar to that which would be achieved by the HE-LHC proposal for the energy frontier

Measurement of the ratios of branching fractions R(D∗)\mathcal{R}(D^{*}) and R(D0)\mathcal{R}(D^{0})

The ratios of branching fractions $\mathcal{R}(D^{*})\equiv\mathcal{B}(\bar{B}\to D^{*}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(\bar{B}\to D^{*}\mu^{-}\bar{\nu}_{\mu})$ and $\mathcal{R}(D^{0})\equiv\mathcal{B}(B^{-}\to D^{0}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(B^{-}\to D^{0}\mu^{-}\bar{\nu}_{\mu})$ are measured, assuming isospin symmetry, using a sample of proton-proton collision data corresponding to 3.0 fb${ }^{-1}$ of integrated luminosity recorded by the LHCb experiment during 2011 and 2012. The tau lepton is identified in the decay mode $\tau^{-}\to\mu^{-}\nu_{\tau}\bar{\nu}_{\mu}$. The measured values are $\mathcal{R}(D^{*})=0.281\pm0.018\pm0.024$ and $\mathcal{R}(D^{0})=0.441\pm0.060\pm0.066$, where the first uncertainty is statistical and the second is systematic. The correlation between these measurements is $\rho=-0.43$. Results are consistent with the current average of these quantities and are at a combined 1.9 standard deviations from the predictions based on lepton flavor universality in the Standard Model.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-039.html (LHCb public pages

LHCb upgrade software and computing : technical design report

This document reports the Research and Development activities that are carried out in the software and computing domains in view of the upgrade of the LHCb experiment. The implementation of a full software trigger implies major changes in the core software framework, in the event data model, and in the reconstruction algorithms. The increase of the data volumes for both real and simulated datasets requires a corresponding scaling of the distributed computing infrastructure. An implementation plan in both domains is presented, together with a risk assessment analysis