2,861 research outputs found
Numerical approach for the aerodynamic analysis if airfoils with laminar separation
A numerical method for simultaneously and efficiently coupling an external subsonic potential flow and an interior viscous flow such that the two flows match at an interfacing boundary is discussed. Both a panel method and a simple point compressible vortex model are used for the outer potential field. The interior flow solvers which were used are the Navier-Stokes and Euler codes of T. J. Coakley and the Euler code of A. Verhoff. In order to test compatibility, the panel method is coupled to the less expensive Euler codes since the coupling procedure is identical with the Navier-Stokes code. The results show significant efficiency improvements can be obtained over the uncoupled approach. Results also indicate the outer potential flow is best represented by the simple point compressible vortex model. The panel method couples smoothly to Coakley's implicit code but is numerically incompatible as coupled with the explicit Euler code. An improved Navier-Stokes code is under initial development which extends the Euler code to include the necessary viscous terms. Results are shown for all infinite length channel with one wavy periodic wall with and without laminar separation
Valuation of aircraft noise by time of day: a comparison of two approaches
This paper reports an innovative application of stated preference techniques to derive values of aircraft noise by time of day and day of week. Revealed preference techniques cannot provide such segmentations which would clearly be of use in policy development especially relating to airport operations. Given the lack of research on this issue the work reported here is highly experimental. Two stated preference experiments were designed. The first focussed on a single time period whilst the second asked respondents to trade between time periods. Both approaches yielded results that are plausible and mutually consistent in terms of relative values by time period. We conclude that stated preference techniques are particularly useful in this context where the use of aggregated values may lead to non-optimal policy decisions
Inhibition of α4-integrin stimulates epicardial–mesenchymal transformation and alters migration and cell fate of epicardially derived mesenchyme
AbstractEpithelial–mesenchymal transformation of the embryonic epicardium produces the subepicardial mesenchyme that is essential for normal coronary vascular development. Gene targeting experiments in mice have demonstrated an essential role for α4-integrin in normal epicardial development, but the precise cellular consequences of α4-integrin loss remain uncertain. To better understand the function of α4-integrin in epicardial development, we constructed a replication-incompetent adenovirus (AdlacZα4AS) that expresses antisense chicken α4-integrin as the 3′ untranslated region of a lacZ reporter gene. This construct effectively labeled cells while greatly reducing levels of α4-integrin mRNA and protein. In quail chick chimeras, transplanted epicardial cells infected with AdlacZα4AS adhered to the heart and were incorporated into the epicardium, but 4 days after grafting, were largely absent from the epicardial epithelium, recapitulating the defect in α4-null mice. This did not result from epicardial cell apoptosis or anomalous migration of epicardial cells to extracardiac sites. Rather, AdlacZα4AS-infected epicardial cells were particularly invasive, being three to four times more likely to migrate to the interstitium of the myocardium than AdlacZ-infected epicardial cells. Accelerated epicardial–mesenchymal transformation and migration of α4-negative epicardium was observed in an organ culture system that does not require prior culture of epicardial cells. Remarkably, AdlacZα4AS infection also prevented targeting of epicardially derived mesenchyme to the media of developing coronary vasculature in the myocardial interstitium. This study provides evidence that epicardial α4-integrin normally restrains epicardial–mesenchymal transformation, invasion, and migration and is essential for correct targeting of epicardially derived mesenchyme to the developing coronary vasculature
Different responses of northern and southern high latitude ionospheric convection to IMF rotations: a case study based on SuperDARN observations
Abstract. We use SuperDARN data to study high-latitude ionospheric convection over a three hour period (starting at 22:00 UT on 2 January 2003), during which the Interplanetary Magnetic Field (IMF) flipped between two states, one with By&gt;&gt;|Bz| and one with Bz&gt;0, both with negative Bx. We find, as expected from previous works, that day side ionospheric convection is controlled by the IMF in both hemispheres. For strongly northward IMF, we observed signatures of two reverse cells, both in the Northern Hemisphere (NH) and in the Southern Hemisphere (SH), due to lobe reconnection. On one occasion, we also observed in the NH two viscous cells at the sides of the reverse cell pair. For duskward IMF, we observed in the NH a large dusk clockwise cell, accompanied by a smaller dawn cell, and the signature of a corresponding pattern in the SH. On two occasions, a three cell pattern, composed of a large clockwise cell and two viscous cells, was observed in the NH. As regards the timings of the NH and SH convection reconfigurations, we find that the convection reconfiguration from a positive Bz dominated to a positive By dominated pattern occurred almost simultaneously (i.e. within a few minutes) in the two hemispheres. On the contrary, the reconfiguration from a By dominated to a northward IMF pattern started in the NH 8–13 min earlier than in the SH. We suggest that part of such a delay can be due to the following mechanism: as IMF Bx&lt;0, the northward-tailward magnetosheath magnetic field reconnects with the magnetospheric field first tailward of the northern cusp and later on tailward of the southern cusp, due to the IMF draping around the magnetopause.</p
X-Ray Diffraction on Mars: Scientific Discoveries Made by the CheMin Instrument
The Mars Science Laboratory Curiosity landed in Gale crater in August 2012 with the goal to identify and characterize habitable environments on Mars. Curiosity has been studying a series of sedimentary rocks primarily deposited in fluviolacustrine environments approximately 3.5 Ga. Minerals in the rocks and soils on Mars can help place further constraints on these ancient aqueous environments, including pH, salinity, and relative duration of liquid water. The Chemistry and Mineralogy (CheMin) X-ray diffraction and X-ray fluorescence instrument on Curiosity uses a Co X-ray source and charge-coupled device detector in transmission geometry to collect 2D Debye-Scherrer ring patterns of the less than 150 micron size fraction of drilled rock powders or scooped sediments. With an angular range of approximately 2.52deg 20 and a 20 resolution of approximately 0.3deg, mineral abundances can be quantified with a detection limit of approximately 1-2 wt. %. CheMin has returned quantitative mineral abundances from 16 mudstone, sandstone, and aeolian sand samples so far. The mineralogy of these samples is incredibly diverse, suggesting a variety of depositional and diagenetic environments and different source regions for the sediments. Results from CheMin have been essential for reconstructing the geologic history of Gale crater and addressing the question of habitability on ancient Mars
Introducing willingness-to-pay for noise changes into transport appraisal: an application of benefit transfer.
Numerous research studies have elicited willingness-to-pay values for transport-related noise, however, in many industrialised countries including the UK, noise costs and benefits are still not incorporated into appraisals for most transport projects and policy changes (Odgaard et al, 2005; Grant-Muller et al, 2001). This paper describes the actions recently taken in the UK to address this issue, comprising: primary research based on the city of Birmingham; an international review of willingness-to-pay evidence; development of values using benefit transfers over time and locations; and integration with appraisal methods. Amongst the main findings are: that the willingness-to-pay estimates derived for the UK are broadly comparable with those used in appraisal elsewhere in Europe; that there is a case for a lower threshold at
1
45dB(A)Leq,18hr1 rather than the more conventional 55dB(A); and that values per dB(A) increase with the noise level above this threshold. There are significant issues over the valuation of rail versus road noise, the neglect of non-residential noise and the valuation of high noise levels in different countries. Conclusions are drawn regarding the feasibility of noise valuation based on benefit transfers in the UK and elsewhere, and future research needs in this field are discussed
- …