178 research outputs found
High activity redox catalysts synthesized by chemical vapor impregnation
The use of precious metals in heterogeneous catalysis relies on the preparation of small nanoparticles that are stable under reaction conditions. To date, most conventional routes used to prepare noble metal nanoparticles have drawbacks related to surface contamination, particle agglomeration, and reproducibility restraints. We have prepared titania-supported palladium (Pd) and platinum (Pt) catalysts using a simplified vapor deposition technique termed chemical vapor impregnation (CVI) that can be performed in any standard chemical laboratory. These materials, composed of nanoparticles typically below 3 nm in size, show remarkable activity under mild conditions for oxidation and hydrogenation reactions of industrial importance. We demonstrate the preparation of bimetallic Pd–Pt homogeneous alloy nanoparticles by this new CVI method, which show synergistic effects in toluene oxidation. The versatility of our CVI methodology to be able to tailor the composition and morphology of supported nanoparticles in an easily accessible and scalable manner is further demonstrated by the synthesis of Pdshell–Aucore nanoparticles using CVI deposition of Pd onto preformed Au nanoparticles supported on titania (prepared by sol immobilization) in addition to the presence of monometallic Au and Pd nanoparticles
Purification and immobilization of engineered glucose dehydrogenase: A new approach to producing gluconic acid from breadwaste
Background Platform chemicals are essential to industrial processes. Used as starting materials for the manufacture of diverse products, their cheap availability and efficient sourcing are an industrial requirement. Increasing concerns about the depletion of natural resources and growing environmental consciousness have led to a focus on the economics and ecological viability of bio-based platform chemical production. Contemporary approaches include the use of immobilized enzymes that can be harnessed to produce high-value chemicals from waste. Results In this study, an engineered glucose dehydrogenase (GDH) was optimized for gluconic acid (GA) production. Sulfolobus solfataricus GDH was expressed in Escherichia coli. The Km and Vmax values for recombinant GDH were calculated as 0.87 mM and 5.91 U/mg, respectively. Recombinant GDH was immobilized on a hierarchically porous silica support (MM-SBA-15) and its activity was compared with GDH immobilized on three commercially available supports. MM-SBA-15 showed significantly higher immobilization efficiency (> 98%) than the commercial supports. After 5 cycles, GDH activity was at least 14% greater than the remaining activity on commercial supports. Glucose in bread waste hydrolysate was converted to GA by free-state and immobilized GDH. After the 10th reuse cycle on MM-SBA-15, a 22% conversion yield was observed, generating 25 gGA/gGDH. The highest GA production efficiency was 47 gGA/gGDH using free-state GDH. Conclusions This study demonstrates the feasibility of enzymatically converting BWH to GA: immobilizing GDH on MM-SBA-15 renders the enzyme more stable and permits its multiple reuse
Sodium ion interactions with aqueous glucose: Insights from quantum mechanics, molecular dynamics, and experiment
In the last several decades, significant efforts have been conducted to understand the fundamental reactivity of glucose derived from plant biomass in various chemical environments for conversion to renewable fuels and chemicals. For reactions of glucose in water, it is known that inorganic salts naturally present in biomass alter the product distribution in various deconstruction processes. However, the molecular-level interactions of alkali metal ions and glucose are unknown. These interactions are of physiological interest as well, for example, as they relate to cation-glucose cotransport. Here, we employ quantum mechanics (QM) to understand the interaction of a prevalent alkali metal, sodium, with glucose from a structural and thermodynamic perspective. The effect on B-glucose is subtle: a sodium ion perturbs bond lengths and atomic partial charges less than rotating a hydroxymethyl group. In contrast, the presence of a sodium ion significantly perturbs the partial charges of α-glucose anomeric and ring oxygens. Molecular dynamics (MD) simulations provide dynamic sampling in explicit water, and both the QM and the MD results show that sodium ions associate at many positions with respect to glucose with reasonably equivalent propensity. This promiscuous binding nature of Na + suggests that computational studies of glucose reactions in the presence of inorganic salts need to ensure thorough sampling of the cation positions, in addition to sampling glucose rotamers. The effect of NaCl on the relative populations of the anomers is experimentally quantified with light polarimetry. These results support the computational findings that Na + interacts similarly with a- and B-glucose
Review on catalytic cleavage of C-C inter-unit linkages in lignin model compounds: Towards lignin depolymerisation
Lignin depolymerisation has received considerable attention recently due to the pressing need to find sustainable alternatives to fossil fuel feedstock to produce chemicals and fuels. Two types of interunit linkages (C–C and C–O linkages) link several aromatic units in the structure of lignin. Between these two inter-unit linkages, the bond energies of C–C linkages are higher than that of C–O linkages, making them harder to break. However, for an efficient lignin depolymerisation, both types of inter-unit linkages have to be broken. This is more relevant because of the fact that many delignification processes tend to result in the formation of additional C–C inter-unit bonds. Here we review the strategies reported for the cleavage of C–C inter-unit linkages in lignin model compounds and lignin. Although a number of articles are available on the cleavage of C–O inter-unit linkages, reports on the selective cleavage of C–C inter-unit linkages are relatively less. Oxidative cleavage, hydrogenolysis, two-step redox-neutral process, microwave assisted cleavage, biocatalytic and photocatalytic methods have been reported for the breaking of C–C inter-unit linkages in lignin. Here we review all these methods in detail, focused only on the breaking of C–C linkages. The objective of this review is to motivate researchers to design new strategies to break this strong C–C inter-unit bonds to valorise lignins, technical lignins in particular
Green Chemicals from d-glucose: Systematic Studies on Catalytic Effects of Inorganic Salts on the Chemo-Selectivity and Yield in Aqueous Solutions
Upgrade of Biomass-Derived Levulinic Acid via Ru/C-Catalyzed Hydrogenation to γ‑Valerolactone in Aqueous−Organic−Ionic Liquids Multiphase Systems
A liquid triphase system made by an aqueous phase, an
organic phase, and an ionic liquid was designed and applied to the
catalytic hydrogenation/dehydration of biomass-derived levulinic acid to
γ-valerolactone. This paper demonstrates that, by operating at 100−150
°C and 35 atm of H2, both in the presence of Ru/C or of a homogeneous
Ru precursor, the use of the triphase system designed to match the
investigated reaction allows the following: (1) to obtain up to quantitative
conversions and 100% selectivity toward the desired product; (2) to
recover the product by simple phase separation; and (3) to preserve the
catalyst activity for in situ recycles without loss of metal. Globally the
investigated reaction proves the concept that a cradle-to-grave approach
to the design of a catalytic reaction system can improve the global sustainability of a chemical transformation by improving
efficiency, product isolation, and catalyst recycle
Catalysing sustainable fuel and chemical synthesis
Concerns over the economics of proven fossil fuel reserves, in concert with government and public acceptance of the anthropogenic origin of rising CO2 emissions and associated climate change from such combustible carbon, are driving academic and commercial research into new sustainable routes to fuel and chemicals. The quest for such sustainable resources to meet the demands of a rapidly rising global population represents one of this century’s grand challenges. Here, we discuss catalytic solutions to the clean synthesis of biodiesel, the most readily implemented and low cost, alternative source of transportation fuels, and oxygenated organic molecules for the manufacture of fine and speciality chemicals to meet future societal demands
Technoeconomic Sensitivity of Biobased Hydrocarbon Production via Fast Pyrolysis to Government Incentive Programs
A novel hybrid organosolv: steam explosion method for the efficient fractionation and pretreatment of birch biomass
Background:
The main role of pretreatment is to reduce the natural biomass recalcitrance and thus enhance sac-
charification yield. A further prerequisite for efficient utilization of all biomass components is their efficient fractiona-
tion into well-defined process streams. Currently available pretreatment methods only partially fulfill these criteria.
Steam explosion, for example, excels as a pretreatment method but has limited potential for fractionation, whereas
organosolv is excellent for delignification but offers poor biomass deconstruction.
Results:
In this article, a hybrid method combining the cooking and fractionation of conventional organosolv pre
-
treatment with the implementation of an explosive discharge of the cooking mixture at the end of pretreatment was
developed. The effects of various pretreatment parameters (ethanol content, duration, and addition of sulfuric acid)
were evaluated. Pretreatment of birch at 200
°C with 60%
v/v ethanol and 1%
w/w
biomass
H
2
SO
4
was proven to be the
most efficient pretreatment condition yielding pretreated solids with 77.9%
w/w cellulose, 8.9%
w/w hemicellulose,
and 7.0
w/w lignin content. Under these conditions, high delignification of 86.2% was demonstrated. The recovered
lignin was of high purity, with cellulose and hemicellulose contents not exceeding 0.31 and 3.25%
w/w, respectively,
and ash to be <
0.17%
w/w in all cases, making it suitable for various applications. The pretreated solids presented
high saccharification yields, reaching 68% at low enzyme load (6
FPU/g) and complete saccharification at high
enzyme load (22.5
FPU/g). Finally, simultaneous saccharification and fermentation (SSF) at 20%
w/w solids yielded an
ethanol titer of 80
g/L after 192
h, corresponding to 90% of the theoretical maximum.
Conclusions:
The novel hybrid method developed in this study allowed for the efficient fractionation of birch
biomass and production of pretreated solids with high cellulose and low lignin contents. Moreover, the explosive dis-
charge at the end of pretreatment had a positive effect on enzymatic saccharification, resulting in high hydrolyzability
of the
pretreated solids and elevated ethanol titers in the
following high-gravity SSF. To the best of our knowledge,
the ethanol concentration obtained with this method is the highest so far for birch biomass
- …