Uncertainties of size measurements in electron microscopy characterization of nanomaterials in foods

Electron microscopy is a recognized standard tool for nanomaterial characterization, and recommended by the European Food Safety Authority for the size measurement of nanomaterials in food. Despite this, little data have been published assessing the reliability of the method, especially for size measurement of nanomaterials characterized by a broad size distribution and/or added to food matrices. This study is a thorough investigation of the measurement uncertainty when applying electron microscopy for size measurement of engineered nanomaterials in foods. Our results show that the number of measured particles was only a minor source of measurement uncertainty for nanomaterials in food, compared to the combined influence of sampling, sample preparation prior to imaging and the image analysis. The main conclusion is that to improve the measurement reliability, care should be taken to consider replications and matrix removal prior to sample preparation

Prevalence of sulfonamide resistance genes in bacterial isolates from manured agricultural soils and pig slurry in the United Kingdom

Prevalence of three sulfonamide resistance genes, sul1, sul2 and sul3 and sulfachloropyridazine (SCP) resistance was determined in bacteria isolated from UK manured agricultural clay soils and slurry samples, over a two year period. Slurry from tylosin-fed pigs amended with SCP and oxytetracycline (OTC) was used for manuring. Sul gene positive isolates were further screened for the presence of class 1 and 2 integrons. Phenotypic resistance to SCP was significantly higher in pig slurry and post application soil than in pre-application soil. Of 5isolates, 23 % carried sul1, 18 % sul2 and 9 % sul3 only. Two percent of isolates contained all three sul genes. Class 1 and class 2 integrons were identified in 5 % and 11.7 % of sul positive isolates. In previous reports, sul1 was linked to class 1 integrons, but in this study only 8 % of sul1 positive isolates carried the intI1 gene. Sulfonamide resistant pathogens were identified in slurry amended soil and soil leachate, including Shigella flexneri, Aerococcus spp. and Acinetobacter baumanni, suggesting a potential environmental reservoir. Sulfonamide resistance in Psychrobacter, Enterococcus and Bacillus spp. is reported for the first time, and this study also provides the first description of the genotype sul1, sul2 and sul3 outside the Enterobacteriacae, and in the soil environment

Modelling both the continual erosion and regeneration of discolouration material in drinking water distribution systems

The erosion of the cohesive layers of particulate matter that causes discolouration in water distribution system mains has previously been modelled using the Prediction of Discolouration in Distribution Systems (PODDS) model. When first proposed, PODDS featured an unvalidated means by which material regeneration on pipe walls could be simulated. Field and laboratory studies of material regeneration have yielded data that suggest that the PODDS formulations incorrectly model these processes. A new model is proposed to overcome this shortcoming. It tracks the relative amount of discolouration material that is bound to the pipe wall over time at each of a number of shear strengths. The model formulations and a mass transport model have been encoded as software, which has been used to verify the model’s constructs and undertake sensitivity analyses. The new formulations for regeneration are conceptually consistent with field and laboratory observed data and has potential value in the proactive management of water distribution systems, such as evaluating change in discolouration risk and planning timely interventions

The impact of biofilms upon surfaces relevant to an intermediate level radioactive waste geological disposal facility under simulated near field conditions.

The ability of biofilms to form on a range of materials (cementious backfill (Nirex Reference Vault Backfill (NRVB)), graphite and stainless steel) relevant to potential UK intermediate level radioactive waste (ILW) disposal concepts was investigated by exposing these surfaces to alkaliphilic flocs generated by mature biofilm communities. Flocs are aggregates of biofilm material that are able to act as a transport vector for the propagation of biofilms.. In systems where biofilm formation was observed there was also a decrease in the sorption of isosaccharinic acids to the NRVB. The biofilms were composed of cells, extracellular DNA (eDNA), proteins and lipids with a smaller polysaccharide fraction, which was biased towards mannopyranosyl linked carbohydrates. The same trend was seen with the graphite and stainless steel surfaces at these pH values, but in this case the biofilms associated with the stainless steel surfaces had a distinct eDNA basal layer that anchored the biofilm to the surface. At pH 13 no structured biofilm was observed, rather all the surfaces accumulated an indistinct organic layer composed of biofilm materials. This was particularly the case for the stainless steel coupons which accumulated relatively large quantities of eDNA. The results demonstrate that there is the potential for biofilm formation in an ILW-GDF provided an initiation source for the microbial biofilm is present. They also suggest that even when conditions are too harsh for biofilm formation, exposed surfaces may accumulate organic material such as eDNA

Integron prevalence and diversity in manured soil

Integron abundance and diversity were studied in soil amended with pig slurry. Real-time PCR illustrated a significant increase in class 1 integron prevalence post slurry-application with increased prevalence still evident at 10 months post-application. Culture dependent data revealed 10 genera, including putative human pathogens, carrying class 1 and 2 integrons

Floc formation reduces the pH stress experienced by microorganisms living in alkaline environments

The survival of microorganisms within a cementitious geological disposal facility for radioactive wastes is heavily dependent on their ability to survive the calcium dominated, hyper-alkaline conditions resulting from the dissolution of the cementitious materials. The present study shows that the formation of flocs, composed of a complex mixture of extracellular polymeric substances (EPS), provides protection against alkaline pH values up to pH 13.0. The flocs were dominated by Alishewanella and Dietzia sp, producing a mannose rich carbohydrate fraction incorporating extracellular DNA, resulting in Ca2+ sequestration. EPS provided a ~10 µm thick layer around the cells within the centre of the flocs, which were capable of growth at pH 11.0 and 11.5, maintaining internal pH values of pH 10.4 and 10.7 respectively. Survival was observed at pH 12.0, where an internal floc pH of 11.6 was observed alongside a reduced associated biomass. Limited floc survival (<2 weeks) was observed at pH 13.0.This study demonstrates that flocs are able to maintain a lower internal pH in response to the hyperalkaline conditions expected to occur within a cementitious, geological disposal facility for radioactive wastes and indicates that floc communities within such a facility would be capable of survival up to a pH of 12.0

Balancing employee needs, project requirements and organisational priorities in team deployment

The 'people and performance' model asserts that performance is a sum of employee ability, motivation and opportunity (AMO). Despite extensive evidence of this people-performance link within manufacturing and many service sectors, studies within the construction industry are limited. Thus, a recent research project set out to explore the team deployment strategies of a large construction company with the view of establishing how a balance could be achieved between organisational strategic priorities, operational project requirements and individual employee needs and preferences. The findings suggested that project priorities often took precedence over the delivery of the strategic intentions of the organisation in meeting employees' individual needs. This approach is not sustainable in the long term because of the negative implications that such a policy had in relation to employee stress and staff turnover. It is suggested that a resourcing structure that takes into account the multiple facets of AMO may provide a more effective approach for balancing organisational strategic priorities, operational project requirements and individual employee needs and preferences more appropriately in the future

When the working day is through: The end of work as identity?

This article seeks to present a counter-case to the ‘end of work thesis’ advocated by writers such as Beck, Sennett and Bauman. It argues that work remains a significant locus of personal identity and that the depiction by these writers of endemic insecurity in the workplace is inaccurate and lacks empirical basis. The article draws upon case study data to illustrate how, across a range of workplaces, work remains an importance source of identity, meaning and social affiliation