Ion yields and erosion rates for Si1−xGex(0x1) ultralow energy O2+ secondary ion mass spectrometry in the energy range of 0.25–1 keV

We report the SIMS parameters required for the quantitative analysis of Si1−xGex across the range of 0 ≤ x ≤ 1 when using low energy O2+ primary ions at normal incidence. These include the silicon and germanium secondary ion yield [i.e., the measured ion signal (ions/s)] and erosion rate [i.e., the speed at which the material sputters (nm/min)] as a function of x. We show that the ratio Rx of erosion rates, Si1−xGex/Si, at a given x is almost independent of beam energy, implying that the properties of the altered layer are dominated by the interaction of oxygen with silicon. Rx shows an exponential dependence on x. Unsurprisingly, the silicon and germanium secondary ion yields are found to depart somewhat from proportionality to (1−x) and x, respectively, although an approximate linear relationship could be used for quantification across around 30% of the range of x (i.e., a reference material containing Ge fraction x would give reasonably accurate quantification across the range of ±0.15x). Direct comparison of the useful (ion) yields [i.e., the ratio of ion yield to the total number of atoms sputtered for a particular species (ions/atom)] and the sputter yields [i.e., the total number of atoms sputtered per incident primary ion (atoms/ions)] reveals a moderate matrix effect where the former decrease monotonically with increasing x except at the lowest beam energy investigated (250 eV). Here, the useful yield of Ge is found to be invariant with x. At 250 eV, the germanium ion and sputter yields are proportional to x for all x

Apparent movement phenomena on CRT displays - Threshold determinations of apparent movements of pulsed light sources

Apparent movement phenomena on cathode ray tube displays - threshold determinations of apparent movements of pulsed light source

Direct observation of a highly spin-polarized organic spinterface at room temperature

The design of large-scale electronic circuits that are entirely spintronics-driven requires a current source that is highly spin-polarised at and beyond room temperature, cheap to build, efficient at the nanoscale and straightforward to integrate with semiconductors. Yet despite research within several subfields spanning nearly two decades, this key building block is still lacking. We experimentally and theoretically show how the interface between Co and phthalocyanine molecules constitutes a promising candidate. Spin-polarised direct and inverse photoemission experiments reveal a high degree of spin polarisation at room temperature at this interface. We measured a magnetic moment on the molecules's nitrogen pi orbitals, which substantiates an ab-initio theoretical description of highly spin-polarised charge conduction across the interface due to differing spinterface formation mechanims in each spin channel. We propose, through this example, a recipe to engineer simple organic-inorganic interfaces with remarkable spintronic properties that can endure well above room temperature

Collisions of boosted black holes: perturbation theory prediction of gravitational radiation

We consider general relativistic Cauchy data representing two nonspinning, equal-mass black holes boosted toward each other. When the black holes are close enough to each other and their momentum is sufficiently high, an encompassing apparent horizon is present so the system can be viewed as a single, perturbed black hole. We employ gauge-invariant perturbation theory, and integrate the Zerilli equation to analyze these time-asymmetric data sets and compute gravitational wave forms and emitted energies. When coupled with a simple Newtonian analysis of the infall trajectory, we find striking agreement between the perturbation calculation of emitted energies and the results of fully general relativistic numerical simulations of time-symmetric initial data.Comment: 5 pages (RevTex 3.0 with 3 uuencoded figures), CRSR-107

Electrospray synthesis of PLGA TIPS microspheres

We successfully demonstrate the synthesis of polymer microspheres using a single electrospray source, and show their physical characterisation. Electrospray has proven to be a versatile method to manufacture particles, giving tight control over size with quasi-monodisperse size distributions. It is a liquid atomisation technique that generates a monodisperse population of highly charged liquid droplets over a broad size range (nanometres to tens of microns). The droplets contain liquid precursors for the in-flight synthesis of particles, and control over the trajectory of these droplets can be precisely manipulated with the use of electric fields to drive them to a grounded substrate. This study reports a method to synthesize poly(lactic-co-glycolic) acid (PLGA) microspheres using the electrospray and thermally induced phase separation (TIPS) techniques, followed by subsequent freeze-drying, for particle production. These microspheres are of interest as vehicles for controlled drug release systems

Anisotropic dehydration of hydrogel surfaces

Efforts to develop tissue-engineered skin for regenerative medicine have explored natural, synthetic, and hybrid hydrogels. The creation of a bilayer material, with the stratification exhibited by native skin is a complex problem. The mechanically robust, waterproof epidermis presents the stratum corneum at the tissue/air interface, which confers many of these protective properties. In this work we explore the effect of high temperatures on alginate hydrogels, which are widely employed for tissue engineering due to their excellent mechanical properties and cellular compatibility. In particular, we investigate the rapid dehydration of the hydrogel surface which occurs following local exposure to heated surfaces with temperatures in the range 100-200 oC. We report the creation of a mechanically strengthened hydrogel surface, with improved puncture resistance and increased coefficient of friction, compared to the unheated surface. The use of a mechanical restraint during heating promoted differences in the rate of mass loss; the rate of temperature increase within the hydrogel, in the presence and absence of restraint, is simulated and discussed. It is hoped that the results will be of use in the development of processes suitable for preparing skin-like analogues; application areas could include wound healing and skin restoration

Distribution of periodic points of polynomial diffeomorphisms of C^2

This paper deals with the dynamics of a simple family of holomorphic diffeomorphisms of \C^2: the polynomial automorphisms. This family of maps has been studied by a number of authors. We refer to [BLS] for a general introduction to this class of dynamical systems. An interesting object from the point of view of potential theory is the equilibrium measure $\mu$ of the set $K$ of points with bounded orbits. In [BLS] $\mu$ is also characterized dynamically as the unique measure of maximal entropy. Thus $\mu$ is also an equilibrium measure from the point of view of the thermodynamical formalism. In the present paper we give another dynamical interpretation of $\mu$ as the limit distribution of the periodic points of $f$

Sagnac Interferometer Enhanced Particle Tracking in Optical Tweezers

A setup is proposed to enhance tracking of very small particles, by using optical tweezers embedded within a Sagnac interferometer. The achievable signal-to-noise ratio is shown to be enhanced over that for a standard optical tweezers setup. The enhancement factor increases asymptotically as the interferometer visibility approaches 100%, but is capped at a maximum given by the ratio of the trapping field intensity to the detector saturation threshold. For an achievable visibility of 99%, the signal-to-noise ratio is enhanced by a factor of 200, and the minimum trackable particle size is 2.4 times smaller than without the interferometer

Squeezing and entanglement delay using slow light

We examine the interaction of a weak probe with $N$ atoms in a lambda-level configuration under the conditions of electromagnetically induced transparency (EIT). In contrast to previous works on EIT, we calculate the output state of the resultant slowly propagating light field while taking into account the effects of ground state dephasing and atomic noise for a more realistic model. In particular, we propose two experiments using slow light with a nonclassical probe field and show that two properties of the probe, entanglement and squeezing, characterizing the quantum state of the probe field, can be well-preserved throughout the passage.Comment: 2 figures; v2: fixed some minor typographical errors in a couple of equations and corrected author spelling in one reference. v3: Added three authors; changed the entaglement definition to conform to a more accepted standard (Duan's entanglement measure); altered the abstract slightly. v4: fixed formatting of figure