685 research outputs found

    Searching for overturning convection in penumbral filaments: slit spectroscopy at 0.2 arcsec resolution

    Full text link
    Recent numerical simulations of sunspots suggest that overturning convection is responsible for the existence of penumbral filaments and the Evershed flow, but there is little observational evidence of this process. Here we carry out a spectroscopic search for small-scale convective motions in the penumbra of a sunspot located 5 deg away from the disk center. The position of the spot is very favorable for the detection of overturning downflows at the edges of penumbral filaments. Our analysis is based on measurements of the Fe I 709.0 nm line taken with the Littrow spectrograph of the Swedish 1 m Solar Telescope under excellent seeing conditions. We compute line bisectors at different intensity levels and derive Doppler velocities from them. The velocities are calibrated using a nearby telluric line, with systematic errors smaller than 150 m/s. Deep in the photosphere, as sampled by the bisectors at the 80%-88% intensity levels, we always observe blueshifts or zero velocities. The maximum blueshifts reach 1.2 km/s and tend to be cospatial with bright penumbral filaments. In the line core we detect blueshifts for the most part, with small velocities not exceeding 300 m/s. Redshifts also occur, but at the level of 100-150 m/s, and only occasionally. The fact that they are visible in high layers casts doubts on their convective origin. Overall, we do not find indications of downflows that could be associated with overturning convection at our detection limit of 150 m/s. Either no downflows exist, or we have been unable to observe them because they occur beneath tau=1 or the spatial resolution/height resolution of the measurements is still insufficient.Comment: Accepted for publication in Ap

    Temporal evolution of the Evershed flow in sunspots. II. Physical properties and nature of Evershed clouds

    Full text link
    Context: Evershed clouds (ECs) represent the most conspicuous variation of the Evershed flow in sunspot penumbrae. Aims: We determine the physical properties of ECs from high spatial and temporal resolution spectropolarimetric measurements. Methods: The Stokes profiles of four visible and three infrared spectral lines are subject to inversions based on simple one-component models as well as more sophisticated realizations of penumbral flux tubes embedded in a static ambient field (uncombed models). Results: According to the one-component inversions, the EC phenomenon can be understood as a perturbation of the magnetic and dynamic configuration of the penumbral filaments along which these structures move. The uncombed inversions, on the other hand, suggest that ECs are the result of enhancements in the visibility of penumbral flux tubes. We conjecture that the enhancements are caused by a perturbation of the thermodynamic properties of the tubes, rather than by changes in the vector magnetic field. The feasibility of this mechanism is investigated performing numerical experiments of thick penumbral tubes in mechanical equilibrium with a background field. Conclusions: While the one-component inversions confirm many of the properties indicated by a simple line parameter analysis (Paper I of this series), we tend to give more credit to the results of the uncombed inversions because they take into account, at least in an approximate manner, the fine structure of the penumbra.Comment: Accepted for publication in A&

    Models and Observations of Sunspot Penumbrae

    Get PDF
    The mysteries of sunspot penumbrae have been under an intense scrutiny for the past 10 years. During this time, some models have been proposed and refuted, while the surviving ones had to be modified, adapted and evolved to explain the ever-increasing array of observational constraints. In this contribution I will review two of the present models, emphasizing their contributions to this field, but also pinpointing some of their inadequacies to explain a number of recent observations at very high spatial resolution. To help explaining these new observations I propose some modifications to each of them. These modifications bring those two seemingly opposite models closer together into a general picture that agrees well with recent 3D magneto-hydrodynamic simulations.Comment: 9 pages, 1 color figure. Review talk to appear in the proceedings of the International Workshop of 2008 Solar Total Eclipse: Solar Magnetism, Corona and Space Weather--Chinese Space Solar Telescope Scienc

    Runup and rundown generated by three-dimensional sliding masses

    Get PDF
    To study the waves and runup/rundown generated by a sliding mass, a numerical simulation model, based on the large-eddy-simulation (LES) approach, was developed. The Smagorinsky subgrid scale model was employed to provide turbulence dissipation and the volume of fluid (VOF) method was used to track the free surface and shoreline movements. A numerical algorithm for describing the motion of the sliding mass was also implemented. To validate the numerical model, we conducted a set of large-scale experiments in a wave tank of 104m long, 3.7m wide and 4.6m deep with a plane slope (1:2) located at one end of the tank. A freely sliding wedge with two orientations and a hemisphere were used to represent landslides. Their initial positions ranged from totally aerial to fully submerged, and the slide mass was also varied over a wide range. The slides were instrumented to provide position and velocity time histories. The time-histories of water surface and the runup at a number of locations were measured. Comparisons between the numerical results and experimental data are presented only for wedge shape slides. Very good agreement is shown for the time histories of runup and generated waves. The detailed three-dimensional complex flow patterns, free surface and shoreline deformations are further illustrated by the numerical results. The maximum runup heights are presented as a function of the initial elevation and the specific weight of the slide. The effects of the wave tank width on the maximum runup are also discussed

    Kinematics and Magnetic Properties of a Light Bridge in a Decaying Sunspot

    Get PDF
    We present the results obtained by analyzing high spatial and spectral resolution data of the solar photosphere acquired by the CRisp Imaging SpectroPolarimeter at the Swedish Solar Telescope on 6 August 2011, relevant to a large sunspot with a light bridge (LB) observed in NOAA AR 11263. These data are complemented by simultaneous Hinode Spectropolarimeter (SP) observation in the Fe I 630.15 nm and 630.25 nm lines. The continuum intensity map shows a discontinuity of the radial distribution of the penumbral filaments in correspondence with the LB, which shows a dark lane (about 0.3" wide and about 8.0" long) along its main axis. The available data were inverted with the Stokes Inversion based on Response functions (SIR) code and physical parameters maps were obtained. The line-of-sight (LOS) velocity of the plasma along the LB derived from the Doppler effect shows motions towards and away from the observer up to 0.6 km/s, which are lower in value than the LOS velocities observed in the neighbouring penumbral filaments. The noteworthy result is that we find motions toward the observer up to 0.6 km/s in the dark lane where the LB is located between two umbral cores, while the LOS velocity motion toward the observer is strongly reduced where the LB is located between an umbral core at one side and penumbral filaments on the other side. Statistically, the LOS velocities correspond to upflows/downflows andcomparing these results with Hinode/SP data, we conclude that the surrounding magnetic field configuration (whether more or less inclined) could have a role in maintaining the conditions for the process of plasma piling up along the dark lane. The results obtained from our study support and confirm outcomes of recent magnetohydro-dynamic simulations showing upflows along the main axis of a LBs

    Ocupação tardia e o desenvolvimento da agropecuária no Estado de Rondônia Uma história da bovinocultura no desenvolvimento regional.

    Get PDF
    Neste artigo se discute a ocupação tardia e sem planejamento de Rondônia e sua influência na bovinocultura. É uma pesquisa bibliográfica e qualitativa na qual foram levantadas informações sobre penetração do gado bovino no Estado do século XVIII ao XXI cujo objetivo é mostrar a configuração da atividade no desenvolvimento regional. Extraiu-se que somente a partir da década de setenta a criação de gado tornou-se importante para a economia regional, mas faltaram políticas públicas de ordenação e planejamento do território ocupado, tornando-a uma atividade competitiva. Aqui as baixas tecnologias provocaram a substituição da floresta pela criação extensiva, e sabe-se que na exploração bovina feita de forma correta poucos danos se verificam em sua área de atuação

    An Experimental Study on Concrete’s Durability and Mechanical Characteristics Subjected to Different Curing Regimes

    Get PDF
     Considering a constant demand in construction of concrete structures to develop novel approaches for predicting the concert’s properties, a host of investigations were performed on concrete’s mechanical properties and durability under various curing regimes. However, few studies were concerned with evaluating the concrete’s durability using non-destructive concrete surface resistivity tests by applying various curing conditions. The present study compares the influence of different curing regimes on durability and compressive strength of concrete to recommend the most effective curing conditions on concrete’s characteristics.  Five curing conditions including ambient, laboratory, dry oven, wet oven and 7-days were analyzed. Accordingly, a non-destructive concrete surface resistivity test was performed on the concrete specimens using hand-held Wenner Resipod probe meter as a reliable and rapid approach. To analyze specimen’s durability, results of the surface sensitivity tests were correlated to chloride ion penetration rate based on the cylinder specimen dimensions and the degree of chloride ion penetration. The compressive strength tests were conducted on the specimens after 7, 28 and 56 days to determine the effect of curing conditions at different ages. Based on the reported outcomes, applying the wet oven curing regime results in higher compressive strength and durability compared to the other curing conditions. Doi: 10.28991/cej-2021-03091681 Full Text: PD

    Electronic depth profiles with atomic layer resolution from resonant soft x-ray reflectivity

    Get PDF
    The analysis of x-ray reflectivity data from artificial heterostructures usually relies on the homogeneity of optical properties of the constituent materials. However, when the x-ray energy is tuned to an absorption edge, this homogeneity no longer exists. Within the same material, spatial regions containing elements at resonance will have optical properties very different from regions without resonating sites. In this situation, models assuming homogeneous optical properties throughout the material can fail to describe the reflectivity adequately. As we show here, resonant soft x-ray reflectivity is sensitive to these variations, even though the wavelength is typically large as compared to the atomic distances over which the optical properties vary. We have therefore developed a scheme for analyzing resonant soft x-ray reflectivity data, which takes the atomic structure of a material into account by "slicing" it into atomic planes with characteristic optical properties. Using LaSrMnO4 as an example, we discuss both the theoretical and experimental implications of this approach. Our analysis not only allows to determine important structural information such as interface terminations and stacking of atomic layers, but also enables to extract depth-resolved spectroscopic information with atomic resolution, thus enhancing the capability of the technique to study emergent phenomena at surfaces and interfaces.Comment: Completely overhauled with respect to the previous version due to peer revie

    Virtual acoustics of the Cathedral of Malaga (Spain)

    Get PDF
    The Catholic Cathedral of Malaga (southern Spain), located in the historical centre, is the most emblematic building of the city. Its construction began in 1528 and was completed in 1782, suffering several interruptions and modifications at the hands of various architects, and hence various architectural styles are superimposed: the interior is Renaissance and the façade is predominantly Baroque. Rectangular in shape, it has three naves of the same height, with the central nave being the widest. In this work, a 3D model of this ecclesiastical space is created in order to carry out an acoustic simulation of its sound field by using the simulation algorithms of CATT Acoustic software implemented in the new TUCT calculation motor (The Universal Cone Tracer). The virtual model created is calibrated through an iterative process of adjustment of reverberation times simulated in such a way that they differ by no more than 5% from those measured. These measured values were obtained from the impulse responses monitored in situ. Likewise, a comparison of the experimental and simulated results of other acoustic parameters in terms of their just noticeable differences (JND) was also carried out, which supports the reliability of the computational acoustic model implemented. This work is the starting point of a multidisciplinary project which aims to incorporate the acoustic aspects within the heritage value of Andalusian cathedral

    Diversity and abundance of weed seeds in cereal crop grain in Western Andalusia, South Spain

    Get PDF
    Se analizó la presencia de semillas de malas hierbas en muestras de la cosecha de cereal de 2013 correspondientes a 200 campos de las provincias de Huelva y Sevilla. Se identificaron 91 especies de las que 29 mostraron una frecuencia de presencia de al menos el 5%. La especie más frecuente (74%) y abundante fue “Lolium rigidum”. Las especies arvenses del género “Phalaris” también fueron muy frecuentes (66-32%). Especies con frecuencia superior al 20% fueron “Polygonum aviculare”, “Convolvulus arvensis”, “Chrysanthemum coronarium”, “Pulicaria paludosa” y “Centaurea diluta”. En comparación con estudios previos referidos al conjunto del área cerealista española, se observó una frecuencia similar de las especies dominantes “L. rigidum” y “P. aviculare” y una frecuencia muy superior de “Phalaris spp.” En sentido contrario, la frecuencia de especies segetales especialistas fue muy inferior.We examined the weed seeds present in crop grain samples from 2013 from across 200 cereal fields in Huelva and Seville provinces, Andalusia, South-western Spain. Ninety-one weed species were identified of which 29 species were present in at least 5% of samples. “Lolium rigidum” was the most frequent (74%) and abundant species. The weedy species of the genus “Phalaris” were also highly frequent (66-32%). “Polygonum aviculare”, “Convolvulus arvensis”, “Chrysanthemum coronarium”, “Pulicaria paludosa” and “Centaurea diluta” were detected in more than 20% of samples. Compared to available data for the whole cereal crop area in Spain, we found a similar frequency of the dominant weeds “L. rigidum” and “P. aviculare” but a much higher presence of “Phalaris” spp. In an opposite trend, the frequency of specialist segetal species was much lower
    corecore