Nitrogen fertiliser value of digested dairy cow slurry, its liquid and solid fractions, and of dairy cow slurry

An understanding of crop availability of livestock slurry nitrogen (N) is necessary to maximise crop N use efficiency and to minimise environmental losses. Results from field and laboratory incubation experiments suggest that first-year crop availability of slurry N comes mainly from its ammonium fraction because net mineralisation of organic N is often negligible in the short term. A two-year field experiment during 2011 and 2012 in northern Italy was undertaken with several aims: to estimate the N fertiliser value of raw dairy cow slurry, digested dairy cow slurry, and the liquid and solid fractions of the digested slurry, and to verify if applied ammonium recovery was similar both among slurries and between slurries and inorganic N fertiliser (ammonium sulphate). Different fertilisers were applied before silage maize cultivation followed by an unfertilised Italian ryegrass crop. The results showed that ammonium recovery was significantly higher in mineral-fertilised (75%) versus slurry-fertilised (30%) treatments, except in digested slurry (65%). This indicates that ammonium applied with organic materials is less efficient than when applied with mineral fertiliser. For the digested slurry and its liquid fraction, most of the applied ammonium was available to the maize during its application year (55%) due to a low carbon (C)/organic N ratio. The apparent N recovery of the raw slurry and digested slurry solid fraction increased substantially between the first (-1.4%) and second (20%) years, as these materials had high C/organic N ratios; they likely immobilised N for several months post application, producing residual effects during the Italian ryegrass and next maize crops

A new push–pull dye for semi-transparent p-type dye-sensitized solar cells: tuning conjugation by sexithiophene chain engineering

We report on the synthesis of two new dyes to be employed as sensitizers in p-type dye-sensitized solar cells (DSCs). The design of the two new molecules under consideration has been inspired by the state-of-art dye PMI-6 T-TPA. In particular, a specific engineering of the thiophene-based central core is here considered to favour structural planarity between an oligothiophenic π-spacer (a sexithiophene), and the acceptor and donor units made by peryleneimide (PMI) and triphenylamine (TPA) moieties, respectively. This leads to a wide absorption in the NIR with stabilization of the HOMO energy level in the resulting dyes, as supported by TD-DFT simulations and spectroscopic characterization. When tested as sensitizers in NiOx-based p-type DSCs, A6D (with an Acceptor-π-Donor structure) outperforms both its counterpart with a Donor-π-Donor structure (D6D) and P1, a benchmark dye in the field of p-DSCs. With A6D dye-sensitizer the resulting DSC device presents the quite remarkable value of stabilized efficiency as high as 0.15 % when I-/I3- is employed as redox couple and nanostructured NiOx photocathode is thick less than 2 μm and does not contain any blocking layer. Notwithstanding the panchromatic feature of the sensitizer, A6D-based devices show an average visible transmittance (AVT) of 8 %. Such a result paves the way toward the application of these types of multifunctional dyes in semi-transparent solar cells

Probing the Binding Site of Abl Tyrosine Kinase Using in Situ Click Chemistry

Modern combinatorial chemistry is used to discover compounds with desired function by an alternative strategy, in which the biological target is directly involved in the choice of ligands assembled from a pool of smaller fragments. Herein, we present the first experimental result where the use of in situ click chemistry has been successfully applied to probe the ligand-binding site of Abl and the ability of this enzyme to form its inhibitor. Docking studies show that Abl is able to allow the in situ click chemistry between specific azide and alkyne fragments by binding to Abl-active sites. This report allows medicinal chemists to use protein-directed in situ click chemistry for exploring the conformational space of a ligand-binding pocket and the ability of the protein to guide its inhibitor. This approach can be a novel, valuable tool to guide drug design synthesis in the field of tyrosine kinases

Modélisation de la ségrégation solutale et application à la purification du silicium photovoltaïque

La purification du silicium joue un rôle essentiel pour la production de cellules photovoltaïques. Dans le but de diminuer le coût et l'impact environnemental associés à cette étape, un procédé de purification alternatif est en développement à l'INES (Institut National de l'Energie Solaire). L'une des étapes de ce procédé consiste à éliminer les impuretés métalliques par ségrégation lors d'un processus de solidification dirigée. L'efficacité de ce procédé est directement liée au transport convectif des impuretés dans la phase liquide. Notre étude porte donc sur la modélisation du phénomène de ségrégation et sur l'optimisation du procédé par un système de brassage mécanique. Une étude numérique basée sur des simulations en régime transitoire a été réalisée. Dans un premier temps, des simulations de ségrégation en 2D ont permis de confirmer le domaine de validité d'un modèle analytique de ségrégation. Puis, dans un second temps, l'écoulement généré par le système de brassage a été caractérisé à l'aide de simulations numériques en 3D. Ces résultats numériques ont pu être comparés à des mesures de champ de vitesse réalisées par PIV sur un dispositif expérimental en eau

Standardization of body composition status in patients with advanced urothelial tumors: the role of a CT-based aI-powered software for the assessment of sarcopenia and patient outcome correlation

Background: Sarcopenia is a well know prognostic factor in oncology, influencing patients' quality of life and survival. We aimed to investigate the role of sarcopenia, assessed by a Computed Tomography (CT)-based artificial intelligence (AI)-powered-software, as a predictor of objective clinical benefit in advanced urothelial tumors and its correlations with oncological outcomes. Methods: We retrospectively searched patients with advanced urothelial tumors, treated with systemic platinum-based chemotherapy and an available total body CT, performed before and after therapy. An AI-powered software was applied to CT to obtain the Skeletal Muscle Index (SMI-L3), derived from the area of the psoas, long spine, and abdominal muscles, at the level of L3 on CT axial images. Logistic and Cox-regression modeling was implemented to explore the association of sarcopenic status and anthropometric features to the clinical benefit rate and survival endpoints. Results: 97 patients were included, 66 with bladder cancer and 31 with upper-tract urothelial carcinoma. Clinical benefit outcomes showed a linear positive association with all the observed body composition variables variations. The chances of not experiencing disease progression were positively associated with ∆_SMI-L3, ∆_psoas, and ∆_long spine muscle when they ranged from ~10-20% up to ~45-55%. Greater survival chances were matched by patients achieving a wider ∆_SMI-L3, ∆_abdominal and ∆_long spine muscle. Conclusions: A CT-based AI-powered software body composition and sarcopenia analysis provide prognostic assessments for objective clinical benefits and oncological outcomes

COVID-19 Vaccination and Medical Liability: An International Perspective in 18 Countries

The COVID-19 vaccination has proven to be the most effective prevention measure, reducing deaths and hospitalizations and allowing, in combination with non-pharmacological interventions, the pandemic to be tackled. Although most of the adverse reactions to vaccination present mild symptoms and serious effects are very rare, they can be the cause of legal action against the healthcare workers (HCWs) who administered it. To highlight differences in the medical liability systems, we performed a search for the three most populous countries in each continent on vaccine injury compensation programs, new laws or policies to protect HCWs administering vaccinations introduced during the COVID-19 pandemic, and policies on mandatory vaccinations, on literature databases and institutional sites. We found that in seven countries the medical liability system is based on Common Law, while in eleven it is mainly based on Civil Law. Considering the application of specific laws to protect HCWs who vaccinate during the pandemic, only the USA and Canada provided immunity from liability. Among the countries we analyzed, fourteen have adopted compensation funds. From an international perspective, our results highlight that in eleven (61.1%) countries medical liability is mainly based on Civil Law, whilst in seven (38.9%) it is based on Common Law

Returning to work and the impact of post COVID-19 condition: A systematic review

Background: The COVID-19 pandemic is still ongoing, with rapidly increasing cases all over the world, and the emerging issue of post COVID-19 (or Long COVID-19) condition is impacting the occupational world. Objective: The aim of this systematic review was to evaluate the impact of lasting COVID-19 symptoms or disability on the working population upon their return to employment. Methods: Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Statements we performed a systematic review in December 2021, screening three databases (PubMed, ISI Web of Knowledge, Scopus), for articles investigating return to work in patients that were previously hospitalized due to COVID-19. A hand-searched was then performed through the references of the included systematic review. A quality assessment was performed on the included studies. Results: Out of the 263 articles found through the initial search, 11 studies were included in this systematic review. The selected studies were divided based on follow-up time, in two months follow-up, follow-up between two and six months, and six months follow-up. All the studies highlighted an important impact of post COVID-19 condition in returning to work after being hospitalized, with differences based on follow-up time, home Country and mean/median age of the sample considered. Conclusions: This review highlighted post COVID-19 condition as a rising problem in occupational medicine, with consequences on workers' quality of life and productivity. The role of occupational physicians could be essential in applying limitations to work duties or hours and facilitating the return to employment in workers with a post COVID-19 condition