Study of the Permeability of Foam Conditioned Soils with Laboratory Tests

EPB tunneling requires that the excavated soil has a plastic and pulpy behavior to be able to apply a stabilizing pressure to the face, but it should also be impervious to counteract filtration forces that could develop ahead of the face. The evaluation of this parameter in granular soil, before and after conditioning, is therefore of key importance for a correct conditioning agents choice. Approach: A new laboratory procedure for testing the permeability of conditioned soil with foam has been proposed. The tests have been carried out at different hydraulic loads, chosen to be 0.1 bars and 1 bar. Results: The proposed procedure has been applied to determine the behavior of differently conditioned granular soils: a fluvial sand and a pozzolanic soil and has shown that an increasing of the FIR induces a relative increase in the time required by water to pass through a standard sample, emphasizing, in this way, the effectiveness of the conditioning on impermeability of the soil. Conclusion: The tests have shown the laboratory procedure adequately captures the behavior of the conditioned soil. Further, the proposed test may also be used as an index for the preliminary definition of the quality of the soil conditioning and suitability for EPB tunnelin

How tunnel boundary irregularities can influence the stresses in a shotcrete lining

The shape of a tunnel boundary excavated by drill & blast in fractured rock masses is influenced by geological conditions and blasting operations. The overbreaks, apart from influencing the construction times and costs, also have an important influence on the stresses acting in the shotcrete lining, particularly when it is used as the final lining. These effects have been analyzed, on the basis of a parametric numerical analysis, and the results have shown that if the boundary shape is more irregular there are traction stresses. These tractions are not evident if a regular shape of the boundary is considered in the numerical mode

Data and pilot combining for composite GNSS signal acquisition

With the advent of new global navigation satellite systems (GNSS), such as the European Galileo, the Chinese Compass and the modernized GPS, the presence of new modulations allows the use of special techniques specifically tailored to acquire and track the new signals. Of particular interest are the new composite GNSS signals that will consist of two different components, the data and pilot channels. Two strategies for the joint acquisition of the data and pilot components are compared. The first technique, noncoherent combining, is fromthe literature and it is used as a comparison term, whereas the analysis of the second one, coherent combining with sign recovery, represents the innovative contribution of this paper. Although the analysis is developed with respect to the Galileo E1 Open Service (OS) modulation, the obtained results are general and can be applied to other GNSS signals

Laboratory test for EPB tunnelling assessment:results of test campaign on two different granular soils

Earth Pressure Balanced shields are currently the most utilized tunnelling machines throughout around the world. The possibility of using conditioning agents that change the mechanical and hydraulic behaviour of a soil, changing it into a plastic paste and thus permitting soil pressure applications at the tunnel face, is the key point to explain the increasing utilization of this technology. Despite its great importance, not much laboratory researches can be registered on soil conditioning, particularly for cohesionless soils. The conditioning criterion is usually defined on the basis of a trial-and-error procedure developed directly at the job sites. A test that is able to simulate the extraction of soil from the bulk chamber with the screw conveyor inclined upwards, as in real machines, can offer a quantitative indication of the conditioned soil behavior for EPB use. The characteristics of the device and the results obtained on many different types of soil are discussed in order to point out the great importance and quality of results that can be achieved using the proposed test device

The behaviour of a two-component backfilling grout used in a Tunnel-Boring Machine

The instantaneous filling of the annulus that is created behind the segment lining at the end of the tail during the TBM advance is an operation of paramount importance. Its main goal is to minimize the surface settlements due to any over-excavation generated by the passage of the TBM. To correctly achieve the goals, a simultaneous backfilling system and the injected material should satisfy the technical, operational and performance characteristics. A two-component system injection for the back-filling is progressively substituting the use of traditional mortars. In this paper different systems of back-filling grout and in particular the two-component system are analyzed and the results of laboratory tests are presented and discussed

Spectral Separation Coefficients for digital GNSS receivers

Publication in the conference proceedings of EUSIPCO, Florence, Italy, 200

QuaRRi: a new methodology for rock-fall risk analysis and management in quarry exploitation

Rockfall is one of the most critical geological events that can affect quarrying activities. Nevertheless, few tools are currently available to help designers and managers correctly define the risk conditions and quantify the advantages, in terms of workers’ safety and quarry management, that can be obtained using suitable prevention devices. For this reason it is necessary to evaluate the various parameters that are involved, and to define the most important and which have the greatest influence on rock-fall phenomena, taking into account the Prevention through Design approach. A risk evaluation systemwhich is able to support decision makers in the critical rockfall risk assessment phase, and offer decision makers the updated information that is necessary for a continuous and dynamic operation design during exploitation activities is here presented and discussed

Syndromic Surveillance and Bioterrorism-related Epidemics

To facilitate rapid detection of a future bioterrorist attack, an increasing number of public health departments are investing in new surveillance systems that target the early manifestations of bioterrorism-related disease. Whether this approach is likely to detect an epidemic sooner than reporting by alert clinicians remains unknown. The detection of a bioterrorism-related epidemic will depend on population characteristics, availability and use of health services, the nature of an attack, epidemiologic features of individual diseases, surveillance methods, and the capacity of health departments to respond to alerts. Predicting how these factors will combine in a bioterrorism attack may be impossible. Nevertheless, understanding their likely effect on epidemic detection should help define the usefulness of syndromic surveillance and identify approaches to increasing the likelihood that clinicians recognize and report an epidemic