12,234 research outputs found
Bored pile design in stiff clay II:Mechanisms and uncertainty
The soil mechanics related to pile design in clay has been the subject of substantial engineering research. In a companion paper, various codes of practice were reviewed showing the effect on pile capacity of the different global factors of safety that emerge from the various partial factor combinations for the ultimate limit state. Factors of safety are generally specified based on the opinions of experts. In this paper an assessment will be made of various objective procedures that can be used to reduce uncertainty in the design process, especially regarding the adoption of a pile resistance model and the selection of a soil strength profile as part of a ultimate limit state check, and the estimation of pile head settlement in the context of a serviceability limit state check. It is shown that both total stress and effective stress calculation methods are applicable in London Clay. Estimates of settlement using a non-linear soil stress–strain relationship are made and compared with published data. It is shown that the compression of the concrete dominates the settlement of long piles. Given the low settlements observed, recommendations are made for a reduction in standard factors of safety for bored pile design in stiff clays. </jats:p
The plastic limit of clays
The plastic limit of soils was first described by Atterberg in 1911. The thread-rolling test was standardised at the US Public Roads Bureau in the 1920s and 1930s, and has subsequently become one of the standard tests of soil mechanics. This paper reviews the original definitions of plastic limit as proposed by Atterberg, and proposes that the brittle failure observed in the plastic limit test is caused by either air entry or cavitation in the clay. Critical state soil mechanics is used to show that the observed range of undrained shear strengths of soils at plastic limit is consistent with this hypothesis. The fallacy that strength at plastic limit is a constant is highlighted, and the implications for geotechnical practice are discussed. </jats:p
Ultraviolet observations of the X-ray photoionized wind of Cygnus X-1 during X-ray soft/high state
(Shortened) Ultraviolet observations of the black hole X-ray binary Cygnus
X-1 were obtained using the STIS on HSTubble. We detect P Cygni line features
show strong, broad absorption components when the X-ray source is behind the
companion star and noticeably weaker absorption when the X-ray source is
between us and the companion star. We fit the P Cygni profiles using the SEI
method applied to a spherically symmetric stellar wind subject to X-ray
photoionization from the black hole. The Si IV doublet provides the most
reliable estimates of the parameters of the wind and X-ray illumination. The
velocity increases with radius according to
, with and
km s.The microturbulent velocity was
km s. Our fit implies a ratio of X-ray luminosity to wind mass-loss rate
of L, measured at = 4.8. Our
models determine parameters that may be used to estimate the accretion rate
onto the black hole and independently predict the X-ray luminosity. Our
predicted L matches that determined by contemporaneous RXTE ASM remarkably
well, but is a factor of 3 lower than the rate according to
Bondi-Hoyle-Littleton spherical wind accretion. We suggest that some of the
energy of accretion may go into powering a jet.Comment: 34 pages, 21 figures, 4 tables, accepted for publication in Ap
Discussion of “Undrained Young’s Modulus of Fine-Grained Soils” by B. Casey, J. T. Germaine, N. O. Abdulhadi, N. S. Kontopoulos, and C. A. Jones
Thermal constraints on the reionisation of hydrogen by population-II stellar sources
Measurements of the intergalactic medium (IGM) temperature provide a
potentially powerful constraint on the reionisation history due to the thermal
imprint left by the photo-ionisation of neutral hydrogen. However, until
recently IGM temperature measurements were limited to redshifts 2 < z < 4.8,
restricting the ability of these data to probe the reionisation history at z >
6. In this work, we use recent measurements of the IGM temperature in the
near-zones of seven quasars at z ~ 5.8 - 6.4, combined with a semi-numerical
model for inhomogeneous reionisation, to establish new constraints on the
redshift at which hydrogen reionisation completed. We calibrate the model to
reproduce observational constraints on the electron scattering optical depth
and the HI photo-ionisation rate, and compute the resulting spatially
inhomogeneous temperature distribution at z ~ 6 for a variety of reionisation
scenarios. Under standard assumptions for the ionising spectra of population-II
sources, the near-zone temperature measurements constrain the redshift by which
hydrogen reionisation was complete to be z > 7.9 (6.5) at 68 (95) per cent
confidence. We conclude that future temperature measurements around other high
redshift quasars will significantly increase the power of this technique,
enabling these results to be tightened and generalised.Comment: 15 pages, 8 figures, accepted for publication in MNRA
The Use of Intensity Techniques for Noise Source Identification in Small Machinery
Intensity techniques are now widely used for two purposes: sound power determination and source identification. The work described in this presentation illustrates an application of the latter type. As part of a noise control program for a small domestic appliance, a narrow‐band intensity measurement system was developed based on a face‐to‐face microphone probe, a two‐channel FFT analyzer, and a personal computer. The probe was used to measure the nearfield normal intensity on planes parallel to the device\u27s major surfaces. Graphical display of these data allowed the radiated sound field to be visualized at any desired frequency. Further, it was possible to distinguish between various types of component sources by examining the field in detail. For example, airborne sound that is generated within the device and radiates to the exterior through apertures or “leaks” was plainly visible. Radiation from the exterior surface of the device resulting from direct vibrational excitation of the surface and from structure‐borne vibration could also be identified. Knowledge of this type was used to advantage to guide the noise control treatment program. Nearfield surveys conducted after these modifications yielded a particularly vivid indication of the effects and benefits of the individual modifications
How neutral is the intergalactic medium surrounding the redshift z=7.085 quasar ULAS J1120+0641?
The quasar ULAS J1120+0641 at redshift z=7.085 has a highly ionised near zone
which is smaller than those around quasars of similar luminosity at z~6. The
spectrum also exhibits evidence for a damping wing extending redward of the
systemic Lya redshift. We use radiative transfer simulations in a cosmological
context to investigate the implications for the ionisation state of the
inhomogeneous IGM surrounding this quasar. Our simulations show that the
transmission profile is consistent with an IGM in the vicinity of the quasar
with a volume averaged HI fraction of f_HI>0.1 and that ULAS J1120+0641 has
been bright for 10^6--10^7 yr. The observed spectrum is also consistent with
smaller IGM neutral fractions, f_HI ~ 10^-3--10-4, if a damped Lya system in an
otherwise highly ionised IGM lies within 5 proper Mpc of the quasar. This is,
however, predicted to occur in only ~5 per cent of our simulated sight-lines
for a bright phase of 10^6--10^7 yr. Unless ULAS J1120+0641 grows during a
previous optically obscured phase, the low age inferred for the quasar adds to
the theoretical challenge of forming a 2x10^9 M_sol black hole at this high
redshift.Comment: 5 pages, 4 figures, accepted to MNRAS letter
Closing in on the picture : analyzing interactions in video recordings
This paper provides a detailed account of the processing and analysing of data, obtained through video recording during reflective practitioner research. It sets out five stages in the analysis of video recordings of classroom interactions during a series of educational drama lessons: from decisions relating to the selection of data for close analysis, to the seeking of themes, and finally to the presentation of conclusions. The researcher adapted and synthesised several processes derived from discourse analysis (Wells, 2001; Spiers, 2004; Gee, 2005) to produce a range of instruments for use in transcription and analysis of verbal and non-verbal discourse. These include: a simple transcription key; classifications for verbal and non-verbal discourse; and a template for a transcription and analysis matrix
The impact of relative position and returns on sacrifice and reciprocity: an experimental study using individual decisions
We present a comprehensive experimental design that makes it possible to characterize other-regarding preferences and their relationship to the decision maker’s relative position. Participants are faced with a large number of decisions involving variations in the trade-offs between own and other’s payoffs, as well as in other potentially important factors like the decision maker’s relative position. We find that: (1) choices are responsive to the cost of helping and hurting others; (2) The weight a decision maker places on others’ monetary payoffs depends on whether the decision maker is in an advantageous or disadvantageous relative position; and (3) We find no evidence of reciprocity of the type linked to menu-dependence. The results of a mixture-model estimation show considerable heterogeneity in subjects’ motivations and confirm the absence of reciprocal motives. Pure selfish behavior is the most frequently observed behavior. Among the subjects exhibiting social preferences, social-welfare maximization is the most frequent, followed by inequality-aversion and by competitiveness
- …