In vitro production of bovine embryos derived from individual donors in the Corral® dish

Background: Since the identity of the embryo is of outmost importance during commercial in vitro embryo production, bovine oocytes and embryos have to be cultured strictly per donor. Due to the rather low yield of oocytes collected after ovum pick-up (OPU) per individual cow, oocyte maturation and embryo culture take place in small groups, which is often associated with inferior embryo development. The objective of this study was to improve embryonic development in small donor groups by using the Corral (R) dish. This commercial dish is designed for human embryo production. It contains two central wells that are divided into quadrants by a semi-permeable wall. In human embryo culture, one embryo is placed per quadrant, allowing individual follow-up while embryos are exposed to a common medium. In our study, small groups of oocytes and subsequently embryos of different bovine donors were placed in the Corral (R) dish, each donor group in a separate quadrant. Results: In two experiments, the Corral (R) dish was evaluated during in vitro maturation (IVM) and/or in vitro culture (IVC) by grouping oocytes and embryos of individual bovine donors per quadrant. At day 7, a significantly higher blastocyst rate was noted in the Corral (R) dish used during IVM and IVC than when only used during IVM (12.9% +/- 2.10 versus 22.8% +/- 2.67) (P < 0.05). However, no significant differences in blastocyst yield were observed anymore between treatment groups at day 8 post insemination. Conclusions: In the present study, the Corral (R) dish was used for in vitro embryo production (IVP) in cattle; allowing to allocate oocytes and/or embryos per donor. As fresh embryo transfers on day 7 have higher pregnancy outcomes, the Corral (R) dish offers an added value for commercial OPU/IVP, since a higher blastocyst development at day 7 is obtained when the Corral (R) dish is used during IVM and IVC

An animal-specific FSI model of the abdominal aorta in anesthetized mice

Recent research has revealed that angiotensin II-induced abdominal aortic aneurysm in mice can be related to medial ruptures occurring in the vicinity of abdominal side branches. Nevertheless a thorough understanding of the biomechanics near abdominal side branches in mice is lacking. In the current work we present a mouse-specific fluid-structure interaction (FSI) model of the abdominal aorta in ApoE(-/-) mice that incorporates in vivo stresses. The aortic geometry was based on contrast-enhanced in vivo micro-CT images, while aortic flow boundary conditions and material model parameters were based on in vivo high-frequency ultrasound. Flow waveforms predicted by FSI simulations corresponded better to in vivo measurements than those from CFD simulations. Peak-systolic principal stresses at the inner and outer aortic wall were locally increased caudal to the celiac and left lateral to the celiac and mesenteric arteries. Interestingly, these were also the locations at which a tear in the tunica media had been observed in previous work on angiotensin II-infused mice. Our preliminary results therefore suggest that local biomechanics play an important role in the pathophysiology of branch-related ruptures in angiotensin-II infused mice. More elaborate follow-up research is needed to demonstrate the role of biomechanics and mechanobiology in a longitudinal setting

Women’s pelvic floor muscle strength and urinary and anal incontinence after childbirth: a cross-sectional study

Abstract OBJECTIVE To analyse pelvic floor muscle strength (PFMS) and urinary and anal incontinence (UI and AI) in the postpartum period. METHOD Cross-sectional study carried out with women in their first seven months after child birth. Data were collected through interviews, perineometry (Peritron™), and the International Consultation on Incontinence Questionnaire-Short Form (ICIQ-SF). RESULTS 128 women participated in the study. The PFMS mean was 33.1 (SD=16.0) cmH2O and the prevalence of UI and AI was 7.8% and 5.5%, respectively. In the multiple analyses, the variables associated with PFMS were type of birth and cohabitation with a partner. Newborn’s weight, previous pregnancy, UI during pregnancy, and sexual activity showed an association with UI after child birth. Only AI prior to pregnancy was associated with AI after childbirth. CONCLUSION Vaginal birth predisposes to the reduction of PFMS, and caesarean section had a protective effect to its reduction. The occurrence of UI during pregnancy is a predictor of UI after childbirth, and women with previous pregnancies and newborns with higher weights are more likely to have UI after childbirth.AI prior to pregnancy is the only risk factor for its occurrence after childbirth. Associations between PFMS and cohabitation with a partner, and between UI and sexual activity do not make possible to conclude that these variables are directly associated

Study of the B +→ J / ψ Λ ¯ p decay in proton-proton collisions at √s = 8 TeV

A study of the B +→ J / ψ Λ ¯ p decay using proton-proton collision data collected at s = 8 TeV by the CMS experiment at the LHC, corresponding to an integrated luminosity of 19.6 fb−1, is presented. The ratio of branching fractions B(B+→J/ψΛ¯p)/B(B+→J/ψK∗(892)+) is measured to be (1.054 ± 0.057(stat) ± 0.035(syst) ± 0.011(B))%, where the last uncertainty reflects the uncertainties in the world-average branching fractions of Λ ¯ and K*(892) + decays to reconstructed final states. The invariant mass distributions of the J / ψ Λ ¯ , J/ψp, and Λ ¯ p systems produced in the B +→ J / ψ Λ¯ p decay are investigated and found to be inconsistent with the pure phase space hypothesis. The analysis is extended by using a model-independent angular amplitude analysis, which shows that the observed invariant mass distributions are consistent with the contributions from excited kaons decaying to the Λ ¯ p system. [Figure not available: see fulltext.

Measurement of the top quark Yukawa coupling from t t kinematic distributions in the lepton+jets final state in proton-proton collisions at s =13 TeV MEASUREMENT of the TOP QUARK YUKAWA COUPLING from ... SIRUNYAN et al.

Results are presented for an extraction of the top quark Yukawa coupling from top quark-antiquark (tt) kinematic distributions in the lepton plus jets final state in proton-proton collisions, based on data collected by the CMS experiment at the LHC at s=13 TeV, corresponding to an integrated luminosity of 35.8 fb-1. Corrections from weak boson exchange, including Higgs bosons, between the top quarks can produce large distortions of differential distributions near the energy threshold of tt production. Therefore, precise measurements of these distributions are sensitive to the Yukawa coupling. Top quark events are reconstructed with at least three jets in the final state, and a novel technique is introduced to reconstruct the tt system for events with one missing jet. This technique enhances the experimental sensitivity in the low invariant mass region, Mtt. The data yields in Mtt, the rapidity difference |yt-yt|, and the number of reconstructed jets are compared with distributions representing different Yukawa couplings. These comparisons are used to measure the ratio of the top quark Yukawa coupling to its standard model predicted value to be 1.07-0.43+0.34 with an upper limit of 1.67 at the 95% confidence level

Search for new neutral Higgs bosons through the H → ZA→ ℓ+ℓ−b b ¯ process in pp collisions at √s = 13 TeV

This paper reports on a search for an extension to the scalar sector of the standard model, where a new CP-even (odd) boson decays to a Z boson and a lighter CP-odd (even) boson, and the latter further decays to a b quark pair. The Z boson is reconstructed via its decays to electron or muon pairs. The analysed data were recorded in proton-proton collisions at a center-of-mass energy s = 13 TeV, collected by the CMS experiment at the LHC during 2016, corresponding to an integrated luminosity of 35.9 fb−1. Data and predictions from the standard model are in agreement within the uncertainties. Upper limits at 95% confidence level are set on the production cross section times branching fraction, with masses of the new bosons up to 1000 GeV. The results are interpreted in the context of the two-Higgs-doublet model. [Figure not available: see fulltext.]

Search for a heavy Higgs boson decaying to a pair of W bosons in proton-proton collisions at √s = 13 TeV

A search for a heavy Higgs boson in the mass range from 0.2 to 3.0 TeV, decaying to a pair of W bosons, is presented. The analysis is based on proton-proton collisions at s = 13 TeV recorded by the CMS experiment at the LHC in 2016, corresponding to an integrated luminosity of 35.9 fb−1. The W boson pair decays are reconstructed in the 2ℓ2ν and ℓν2q final states (with ℓ = e or μ). Both gluon fusion and vector boson fusion production of the signal are considered. Interference effects between the signal and background are also taken into account. The observed data are consistent with the standard model (SM) expectation. Combined upper limits at 95% confidence level on the product of the cross section and branching fraction exclude a heavy Higgs boson with SM-like couplings and decays up to 1870 GeV. Exclusion limits are also set in the context of a number of two-Higgs-doublet model formulations, further reducing the allowed parameter space for SM extensions. [Figure not available: see fulltext.