Energy demand on dairy farms in Ireland

peer-reviewedReducing electricity consumption in Irish milk production is a topical issue for 2 reasons. First, the introduction of a dynamic electricity pricing system, with peak and off-peak prices, will be a reality for 80% of electricity consumers by 2020. The proposed pricing schedule intends to discourage energy consumption during peak periods (i.e., when electricity demand on the national grid is high) and to incentivize energy consumption during off-peak periods. If farmers, for example, carry out their evening milking during the peak period, energy costs may increase, which would affect farm profitability. Second, electricity consumption is identified in contributing to about 25% of energy use along the life cycle of pasture-based milk. The objectives of this study, therefore, were to document electricity use per kilogram of milk sold and to identify strategies that reduce its overall use while maximizing its use in off-peak periods (currently from 0000 to 0900h). We assessed, therefore, average daily and seasonal trends in electricity consumption on 22 Irish dairy farms, through detailed auditing of electricity-consuming processes. To determine the potential of identified strategies to save energy, we also assessed total energy use of Irish milk, which is the sum of the direct (i.e., energy use on farm) and indirect energy use (i.e., energy needed to produce farm inputs). On average, a total of 31.73 MJ was required to produce 1kg of milk solids, of which 20% was direct and 80% was indirect energy use. Electricity accounted for 60% of the direct energy use, and mainly resulted from milk cooling (31%), water heating (23%), and milking (20%). Analysis of trends in electricity consumption revealed that 62% of daily electricity was used at peak periods. Electricity use on Irish dairy farms, therefore, is substantial and centered around milk harvesting. To improve the competitiveness of milk production in a dynamic electricity pricing environment, therefore, management changes and technologies are required that decouple energy use during milking processes from peak periods

The Need and Potential of Biosensors to Detect Dioxins and Dioxin-Like Polychlorinated Biphenyls along the Milk, Eggs and Meat Food Chain

Dioxins and dioxin-like polychlorinated biphenyls (DL-PCBs) are hazardous toxic, ubiquitous and persistent chemical compounds, which can enter the food chain and accumulate up to higher trophic levels. Their determination requires sophisticated methods, expensive facilities and instruments, well-trained personnel and expensive chemical reagents. Ideally, real-time monitoring using rapid detection methods should be applied to detect possible contamination along the food chain in order to prevent human exposure. Sensor technology may be promising in this respect. This review gives the state of the art for detecting possible contamination with dioxins and DL-PCBs along the food chain of animal-source foods. The main detection methods applied (i.e., high resolution gas-chromatography combined with high resolution mass-spectrometry (HRGC/HRMS) and the chemical activated luciferase gene expression method (CALUX bioassay)), each have their limitations. Biosensors for detecting dioxins and related compounds, although still under development, show potential to overcome these limitations. Immunosensors and biomimetic-based biosensors potentially offer increased selectivity and sensitivity for dioxin and DL-PCB detection, while whole cell-based biosensors present interpretable biological results. The main shortcoming of current biosensors, however, is their detection level: this may be insufficient as limits for dioxins and DL-PCBs for food and feedstuffs are in pg per gram level. In addition, these contaminants are normally present in fat, a difficult matrix for biosensor detection. Therefore, simple and efficient extraction and clean-up procedures are required which may enable biosensors to detect dioxins and DL-PCBs contamination along the food chain

Milk quality and hygiene: Knowledge, attitudes and practices of smallholder dairy farmers in central Kenya

Milk production is an important livelihood source for smallholder dairy farmers in low-to-middle-income countries (LMICs) such as Kenya. However, milk quality and safety are a challenge due to unhygienic handling and non-adherence to food safety standards. The objective of this study was to investigate the knowledge, attitudes and adoption of milk quality and food safety practices by smallholder farmers in Kenya.Ten Focus Group Discussions (FGDs), involving 71 smallholder farmers, were held to collect qualitative data on knowledge, attitudes and practices (KAPs) of smallholder dairy farmers in Laikipia, Nakuru, and Nyandarua counties. Additionally, data were collected through a cross-sectional administered to 652 smallholder farming households. The results of the study revealed low knowledge level and negative attitudes towards respecting antibiotics treatment withdrawal periods, milk quality standards and food safety regulations. Farmers stated they had received low levels of training on milk quality and safety standards. The majority of farmers adopted animal health measures and hygienic measures such as hand washing and udder cleaning. However, unhygienic milking environments, the use of plastic containers, the use of untreated water, and lack of teat dipping compromised milk quality and safety. Currently, milk production, handling and consumption could expose actors along the dairy value chain to health risks. The adoption of milk quality and food safety practices was influenced by farmers' knowledge, socioeconomic characteristics, and choice of marketing channel.There is a need to improve farmers' knowledge and attitudes and implement hygienic control, disease control and antibiotic residue control practices in the milk production process to meet required milk quality and food safety standards. Awareness campaigns and training programmes for smallholder dairy farmers could foster behavioural change and lead to an improvement in milk quality in Kenya

The role of power relationships, trust and social networks in shaping milk quality in Kenya

The objective of this study was to examine social networks in dairy value chains (DVCs) in Kenya and understand how DVC actors' power relationships and trust influence their behaviour regarding milk quality. We conducted a stakeholder analysis using the Net-Map tool in Laikipia, Nakuru and Nyandarua counties in Kenya. VisuaLyzer software was used to analyse the social networks. Thematic content analysis of the discussions, recorded during the mapping exercise, was undertaken using ATLAS.ti. Formal DVC had more actors and dense social networks characterised by vertical and horizontal integration, high levels of power asymmetries between actors, limited trust and short-term contractual arrangements. Informal DVC was characterised by fewer actors and less dense social networks, low levels of power asymmetries between actors and a high level of trust due to the existence of reciprocal personal relationships. Milk was perceived to be of higher quality in the formal value chain reflecting top-down enforcement of milk standards, bottom-up collective action, power asymmetries and contractual relationships. Poor milk quality management in the informal DVC underscores the need for powerful actors, e.g. regulatory agencies, and buyers such as processors, to influence other DVC actors' behavioural change. Understanding and leveraging DVC social networks and actors' power and addressing power asymmetries and enhancing trust between actors will increase compliance with milk quality standards. There is an urgent imperative to design policies and interventions which empower DVC actors, by providing economic incentives, enhancing their skills and knowledge and their access to infrastructure which facilitates milk quality improvement

Transforming sustainable aquaculture by applying circularity principles

A circular economy is considered one way to reduce environmental impacts of human activities, by more efficient use of resources and recovery, resulting in less waste and emissions compared to linear take-make-dispose systems. Muscat et al. developed five ecological principles to guide biomass use towards a circular economy. A few studies have demonstrated environmental benefits of applying these principles to land-based food systems, but to date, these principles have not been explored in aquaculture. The current study expands on these principles and provides a narrative review to (i) translate them to aquaculture, while identifying implications for the main species and production systems, and (ii) identify the main pathways to make aquaculture more circular. We show that the underlying concepts of the ‘safeguard’, ‘entropy’, and ‘recycle’ principles have been well researched and sometimes well implemented. In contrast, the ‘avoid’ and ‘prioritise’ principles have been explored much less; doing so would provide an opportunity to decrease environmental impacts of aquaculture at the food-system level. One example is prioritising the production of species that contribute to food and nutrition security, have low environmental impacts and thinking at wider food system scale to avoid feed-food competition in aquaculture. We identified six priorities that could make aquaculture more circular: (i) increase production and demand for the most essential species, (ii) decrease food loss and waste at farm and post-harvest stages, (iii) support nutrient recycling practices at multiple scales, (iv) adapt aquafeed formulations, (v) inform consumers about benefits of species of low trophic levels and other environmentally friendly aquatic foods, and (vi) address urgent research gaps.publishedVersio

Effect of different cleaning procedures on water use and bacterial levels in weaner pig pens

peer reviewedPork is one of the most globally eaten meats and the pig production chain contributes significantly to the water footprint of livestock production. However, very little knowledge is available about the on-farm factors that influence freshwater use in the pig production chain. An experiment was conducted to quantify the effect of three different washing treatments on freshwater use, bacterial levels [(total bacterial counts; TBC), Enterobacteriaceae and Staphylococcus] and cleaning time in washing of pens for weaning pigs. Three weaner rooms were selected with each room having 10 pens and a capacity to hold up to 14 pigs each. Pigs were weaned and kept in the pens for 7 weeks. Finally, the pens were cleaned before the next batch of pigs moved in. The washing treatments used were power washing and disinfection (WASH); presoaking followed by power washing and disinfection (SOAK), and presoaking followed by detergent, power washing and disinfection (SOAK + DETER). A water meter was used to collect water use data and swab samples were taken to determine the bacterial levels. The results showed that there was no overall effect of washing treatments on water use. However, there was an effect of treatment on the washing time (p<0.01) with SOAK and SOAK+DETER reducing the washing time per pen by 2.3 minutes (14%) and 4.2 minutes (27%) compared to WASH. Nonetheless, there was an effect of sampling time (before or after washing) (p<0.001) on the levels of TBC and Staphylococcus, but no effect was seen on Enterobacteriaceae levels. Thus, the washing treatments used in this study had no effect on the water use of the pork production chain. Although there was no difference in both water use and bacterial load, from a producer perspective, presoaking and detergent use can save time and labour costs, so this would be the preferred option

The compatibility of circularity and national dietary recommendations for animal products in five European countries: a modelling analysis on nutritional feasibility, climate impact, and land use

BACKGROUND National food-based dietary guidelines (FBDGs) are generally designed from a human health perspective and often disregard sustainability aspects. Circular food production systems are a promising solution to achieve sustainable healthy diets. In such systems, closing nutrient cycles where possible and minimising external inputs contribute to reducing environmental impacts. This change could be made by limiting livestock feed to available low-opportunity-cost biomass (LOCB). We examined the compatibility of national dietary guidelines for animal products with livestock production on the basis of the feed supplied by available LOCB. METHODS We investigated whether the national dietary recommendations for animal products for Bulgaria, Malta, the Netherlands, Sweden, and Switzerland could be met with domestically available LOCB. We used an optimisation model that allocates feed resources to different species of farm animals. Of the resulting scenarios, we assessed the nutritional feasibility, climate impact, and land use. FINDINGS Our results showed the environmental benefits of reducing the recommended animal products in the FBDGs, and that animal products from LOCB could provide between 22% (Netherlands) and 47% (Switzerland) of total protein contributions of the FBDGs. This range covers a substantial part of the nutritional needs of the studied populations. To fully meet these needs, consumption of plant-based food could be increased. INTERPRETATION Our results contribute to the discussion of what quantities of animal products in dietary guidelines are compatible with circular food systems. Thus, national dietary recommendations for animal products should be revised and recommended quantities lowered. This finding is consistent with recent efforts to include sustainability criteria in dietary guidelines. FUNDING Swiss National Science Foundation and the Dutch Research Council

Making the most of imperfect data: A critical evaluation of standard information collected in farm household surveys

Household surveys are one of the most commonly used tools for generating insight into rural communities. Despite their prevalence, few studies comprehensively evaluate the quality of data derived from farm household surveys. We critically evaluated a series of standard reported values and indicators that are captured in multiple farm household surveys, and then quantified their credibility, consistency and, thus, their reliability. Surprisingly, even variables which might be considered ‘easy to estimate’ had instances of non-credible observations. In addition, measurements of maize yields and land owned were found to be less reliable than other stationary variables. This lack of reliability has implications for monitoring food security status, poverty status and the land productivity of households. Despite this rather bleak picture, our analysis also shows that if the same farm households are followed over time, the sample sizes needed to detect substantial changes are in the order of hundreds of surveys, and not in the thousands. Our research highlights the value of targeted and systematised household surveys and the importance of ongoing efforts to improve data quality. Improvements must be based on the foundations of robust survey design, transparency of experimental design and effective training. The quality and usability of such data can be further enhanced by improving coordination between agencies, incorporating mixed modes of data collection and continuing systematic validation programmes

PROGNOSTIC IMPLICATION OF THE MITRAL VALVE TENTING GEOMETRY IN PATIENTS WITH DILATED CARDIOMYOPATHY: TRANSTHORACIC REAL-TIME 3D ECHOCARDIOGRAPHIC STUDY

BACKGROUND: The pathogenic phospholamban R14del mutation causes dilated and arrhythmogenic right ventricular cardiomyopathies and is associated with an increased risk of malignant ventricular arrhythmias and end-stage heart failure. We performed a multicentre study to evaluate mortality, cardiac disease outcome, and risk factors for malignant ventricular arrhythmias in a cohort of phospholamban R14del mutation carriers. METHODS AND RESULTS: Using the family tree mortality ratio method in a cohort of 403 phospholamban R14del mutation carriers, we found a standardized mortality ratio of 1.7 (95% confidence interval, 1.4-2.0) with significant excess mortality starting from the age of 25 years. Cardiological data were available for 295 carriers. In a median follow-up period of 42 months, 55 (19%) individuals had a first episode of malignant ventricular arrhythmias and 33 (11%) had an end-stage heart failure event. The youngest age at which a malignant ventricular arrhythmia occurred was 20 years, whereas for an end-stage heart failure event this was 31 years. Independent risk factors for malignant ventricular arrhythmias were left ventricular ejection fraction <45% and sustained or nonsustained ventricular tachycardia with hazard ratios of 4.0 (95% confidence interval, 1.9-8.1) and 2.6 (95% confidence interval, 1.5-4.5), respectively. CONCLUSIONS: Phospholamban R14del mutation carriers are at high risk for malignant ventricular arrhythmias and end-stage heart failure, with left ventricular ejection fraction <45% and sustained or nonsustained ventricular tachycardia as independent risk factors. High mortality and a poor prognosis are present from late adolescence. Genetic and cardiac screening is, therefore, advised from adolescence onwards

BIO FOr CARE: biomarkers of hypertrophic cardiomyopathy development and progression in carriers of Dutch founder truncating MYBPC3 variants—design and status

Background: Hypertrophic cardiomyopathy (HCM) is the most prevalent monogenic heart disease, commonly caused by truncating variants in the MYBPC3 gene. HCM is an important cause of sudden cardiac death; however, overall prognosis is good and penetrance in genotype-positive individuals is incomplete. The underlying mechanisms are poorly understood and risk stratification remains limited. Aim: To create a nationwide cohort of carriers of truncating MYBPC3 variants for identification of predictive biomarkers for HCM development and progression. Methods: In the multicentre, observational BIO FOr CARe (Identification of BIOmarkers of hypertrophic cardiomyopathy development and progression in Dutch MYBPC3 FOunder variant CARriers) cohort, carriers of the c.2373dupG, c.2827C > T, c.2864_2865delCT and c.3776delA MYBPC3 variants are included and prospectively undergo longitudinal blood collection. Clinical data are collected from first presentation onwards. The primary outcome constitutes a composite endpoint of HCM progression (maximum wall thickness ≥ 20 mm, septal reduction therapy, heart failure occurrence, sustained ventricular arrhythmia and sudden cardiac death). Results: So far, 250 subjects (median age 54.9 years (interquartile range 43.3, 66.6), 54.8% male) have been included. HCM was diagnosed in 169 subjects and dilated cardiomyopathy in 4. The primary outcome was met in 115 subjects. Blood samples were collected from 131 subjects. Conclusion: BIO FOr CARe is a genetically homogeneous, phenotypically heterogeneous cohort incorporating a clinical data registry and longitudinal blood collection. This provides a unique opportunity to study biomarkers for HCM development and prognosis. The established infrastructure can be extended to study other genetic variants. Other centres are invited to join our consortium