3,762 research outputs found
A feasibility assessment of installation, operation and disposal options for nuclear reactor power system concepts for a NASA growth space station
A preliminary feasibility assessment of the integration of reactor power system concepts with a projected growth space station architecture was conducted to address a variety of installation, operational disposition, and safety issues. A previous NASA sponsored study, which showed the advantages of space station - attached concepts, served as the basis for this study. A study methodology was defined and implemented to assess compatible combinations of reactor power installation concepts, disposal destinations, and propulsion methods. Three installation concepts that met a set of integration criteria were characterized from a configuration and operational viewpoint, with end-of-life disposal mass identified. Disposal destinations that met current aerospace nuclear safety criteria were identified and characterized from an operational and energy requirements viewpoint, with delta-V energy requirement as a key parameter. Chemical propulsion methods that met current and near-term application criteria were identified and payload mass and delta-V capabilities were characterized. These capabilities were matched against concept disposal mass and destination delta-V requirements to provide the feasibility of each combination
Reliability and mass analysis of dynamic power conversion systems with parallel of standby redundancy
A combinatorial reliability approach is used to identify potential dynamic power conversion systems for space mission applications. A reliability and mass analysis is also performed, specifically for a 100 kWe nuclear Brayton power conversion system with parallel redundancy. Although this study is done for a reactor outlet temperature of 1100K, preliminary system mass estimates are also included for reactor outlet temperatures ranging up to 1500 K
An investigation of Fe XV emission lines in solar flare spectra
Previously, large discrepancies have been found between theory and
observation for Fe XV emission line ratios in solar flare spectra covering the
224-327 A wavelength range, obtained by the Naval Research Laboratory's S082A
instrument on board Skylab. These discrepancies have been attributed to either
errors in the adopted atomic data or the presence of additional atomic
processes not included in the modelling, such as fluorescence. However our
analysis of these plus other S082A flare observations (the latter containing Fe
XV transitions between 321-482 A), performed using the most recent Fe XV atomic
physics calculations in conjunction with a CHIANTI synthetic flare spectrum,
indicate that blending of the lines is primarily responsible for the
discrepancies. As a result, most Fe XV lines cannot be employed as electron
density diagnostics for solar flares, at least at the spectral resolution of
S082A and similar instruments (i.e. ~ 0.1 A). An exception is the intensity
ratio I(321.8 A)/I(327.0 A), which appears to provide good estimates of the
electron density at this spectral resolution.Comment: 6 pages, 3 figures, Astronomy & Astrophysics, in pres
RHESSI and SOHO/CDS Observations of Explosive Chromospheric Evaporation
Simultaneous observations of explosive chromospheric evaporation are
presented using data from the Reuven Ramaty High Energy Solar Spectroscopic
Imager (RHESSI) and the Coronal Diagnostic Spectrometer (CDS) onboard SOHO. For
the first time, co-spatial imaging and spectroscopy have been used to observe
explosive evaporation within a hard X-ray emitting region. RHESSI X-ray images
and spectra were used to determine the flux of non-thermal electrons
accelerated during the impulsive phase of an M2.2 flare. Assuming a
thick-target model, the injected electron spectrum was found to have a spectral
index of ~7.3, a low energy cut-off of ~20 keV, and a resulting flux of
>4x10^10 ergs cm^-2 s^-1. The dynamic response of the atmosphere was determined
using CDS spectra, finding a mean upflow velocity of 230+/-38 km s^-1 in Fe XIX
(592.23A), and associated downflows of 36+/-16 km s^-1 and 43+/-22 km s^-1 at
chromospheric and transition region temperatures, respectively, relative to an
averaged quiet-Sun spectra. The errors represent a 1 sigma dispersion. The
properties of the accelerated electron spectrum and the corresponding
evaporative velocities were found to be consistent with the predictions of
theory.Comment: 5 pages, 4 figures, ApJL (In Press
Magnetic structure of free cobalt clusters studied with Stern-Gerlach deflection experiments
We have studied the magnetic properties of free cobalt clusters in two
semi-independent Stern-Gerlach deflection experiments at temperatures between
60 and 307 K. We find that clusters consisting of 13 to 200 cobalt atoms
exhibit behavior that is entirely consistent with superparamagnetism, though
complicated by finite-system fluctuations in cluster temperature. By fitting
the data to the Langevin function, we report magnetic moments per atom for each
cobalt cluster size and compare the results of our two measurements and all
those performed previously. In addition to a gradual decrease in moment per
atom with increasing size, there are oscillations that appear to be caused by
geometrical shell structure. We discuss our observations in light of the two
competing models for Langevin-like magnetization behavior in free clusters,
superparamagnetism and adiabatic magnetization, and conclude that the evidence
strongly supports the superparamagnetic model
Recommended from our members
Security-informed safety: integrating security within the safety demonstration of a smart device
Safety and security engineering have, over the years, developed their own regulations, standards, cultures, and practices. However, there’s a growing realisation that security is closely connected to safety. Safety must be security-informed: if a safety-critical system isn’t secure, it isn’t safe. A safety demonstration is incomplete and unconvincing unless it considers security. In our work for government and industry, we have used the Claims, Arguments, Evidence (CAE) framework to analyse the impact of security on a safety justification or safety case and identified the significant changes needed to address security explicitly. This will impact the design and implementation process as well as the assurance and V&V approach.
In this paper we discuss the impact of integrating security when developing a safety demonstration of a smart device. A smart device is an instrument, device or component that contains a microprocessor (and therefore contains both hardware and software) and is programmed to provide specialised capabilities, often measuring or controlling a process variable. Examples of smart devices include radiation monitors, relays, turbine governors, uninterruptible power supplies and heating ventilation, and air conditioning controllers
Convergence and segregation of the multiple rod pathways in mammalian retina.
Using a multidisciplinary approach, we demonstrate that three different pathways are responsible for the transmission of rod signals across the mouse retina. Each pathway serves a primarily nonoverlapping range of stimulus intensities, with ganglion cells receiving either segregated or convergent inputs. For both on-center (ON) and off-center (OFF) ganglion cells, the primary rod pathway carries signals with the lowest threshold, whereas the secondary rod pathway is less sensitive by approximately 1 log unit. In addition, OFF signaling uses a tertiary rod pathway that is approximately 1 log unit less sensitive than the secondary. Although some ganglion cells received rod inputs exclusively from one of the pathways, others showed convergent inputs. Using pharmacological and genetic approaches, we defined classes of ON and OFF ganglion cells for which the scotopic inputs derive only from the primary pathway or from both primary and secondary pathways. In addition, we observed a class of OFF ganglion cell receiving mixed input from primary and tertiary pathways. Interestingly, OFF ganglion cells receiving convergent inputs from all three rod pathways or from the secondary and tertiary pathways together were never observed. Overall, our data show a complex arrangement of convergence and segregation of rod inputs to ganglion cells in the mammalian retina
Wigner crystal model of counterion induced bundle formation of rod-like polyelectrolytes
A simple electrostatic theory of condensation of rod-like polyelectrolytes
under influence of polyvalent ions is proposed. It is based on the idea that
Manning condensation of ions results in formation of the Wigner crystal on a
background of a bundle of rods. It is shown that, depending on a single
dimensionless parameter, this can be the densely packed three-dimensional
Wigner crystal or the two-dimensional crystal on the rod surfaces. For DNA the
location of charge on the spiral results in a model of the one-dimensional
Wigner crystal. It is also argued that the Wigner crystal idea can be applied
to self-assembly of other polyelectrolytes, for example, colloids and DNA-lipid
complexes.Comment: 4 pages; typos corrected, references adde
Inferring DNA sequences from mechanical unzipping data: the large-bandwidth case
The complementary strands of DNA molecules can be separated when stretched
apart by a force; the unzipping signal is correlated to the base content of the
sequence but is affected by thermal and instrumental noise. We consider here
the ideal case where opening events are known to a very good time resolution
(very large bandwidth), and study how the sequence can be reconstructed from
the unzipping data. Our approach relies on the use of statistical Bayesian
inference and of Viterbi decoding algorithm. Performances are studied
numerically on Monte Carlo generated data, and analytically. We show how
multiple unzippings of the same molecule may be exploited to improve the
quality of the prediction, and calculate analytically the number of required
unzippings as a function of the bandwidth, the sequence content, the elasticity
parameters of the unzipped strands
Positive impact of low-dose, high-energy radiation on bone in partial- and/or full-weightbearing mice
Astronauts traveling beyond low Earth orbit will be exposed to galactic cosmic radiation (GCR); understanding how high energy ionizing radiation modifies the bone response to mechanical unloading is important to assuring crew health. To investigate this, we exposed 4-mo-old female Balb/cBYJ mice to an acute space-relevant dose of 0.5 Gy 56Fe or sham (n = ~8/group); 4 days later, half of the mice were also subjected to a ground-based analog for 1/6 g (partial weightbearing) (G/6) for 21 days. Microcomputed tomography (µ-CT) of the distal femur reveals that 56Fe exposure resulted in 65-78% greater volume and improved microarchitecture of cancellous bone after 21 d compared to sham controls. Radiation also leads to significant increases in three measures of energy absorption at the mid-shaft femur and an increase in stiffness of the L4 vertebra. No significant effects of radiation on bone formation indices are detected; however, G/6 leads to reduced % mineralizing surface on the inner mid-tibial bone surface. In separate groups allowed 21 days of weightbearing recovery from G/6 and/or 56Fe exposure, radiation-exposed mice still exhibit greater bone mass and improved microarchitecture vs. sham control. However, femoral bone energy absorption values are no longer higher in the 56Fe-exposed WB mice vs. sham controls. We provide evidence for persistent positive impacts of high-LET radiation exposure preceding a period of full or partial weightbearing on bone mass and microarchitecture in the distal femur and, for full weightbearing mice only and more transiently, cortical bone energy absorption values
- …