6,184 research outputs found
A study of the control problem of the shoot side environment delivery system of a closed crop growth research chamber
The details of our initial study of the control problem of the crop shoot environment of a hypothetical closed crop growth research chamber (CGRC) are presented in this report. The configuration of the CGRC is hypothetical because neither a physical subject nor a design existed at the time the study began, a circumstance which is typical of large scale systems control studies. The basis of the control study is a mathematical model which was judged to adequately mimic the relevant dynamics of the system components considered necessary to provide acceptable realism in the representation. Control of pressure, temperature, and flow rate of the crop shoot environment, along with its oxygen, carbon dioxide, and water concentration is addressed. To account for mass exchange, the group of plants is represented in the model by a source of oxygen, a source of water vapor, and a sink for carbon dioxide. In terms of the thermal energy exchange, the group of plants is represented by a surface with an appropriate temperature. Most of the primitive equations about an experimental operating condition and a state variable representation which was extracted from the linearized equations are presented. Next, we present the results of a real Jordan decomposition and the repositioning of an undesirable eigenvalue via full state feedback. The state variable representation of the modeling system is of the nineteenth order and reflects the eleven control variables and eight system disturbances. Five real eigenvalues are very near zero, with one at zero, three having small magnitude positive values, and one having a small magnitude negative value. A Singular Value Decomposition analysis indicates that these non-zero eigenvalues are not results of numerical error
A perspective on CELSS control issues
Some issues of Closed Ecological Life Support System (CELSS) analysis and design are effectively addressed from a systems control perspective. CELSS system properties that may be elucidated using control theory in conjunction with mathematical and simulation modeling are enumerated. The approach that is being taken to the design of a control strategy for the Crop Growth Research Chamber (CGRC) and the relationship of that approach to CELSS plant growth unit subsystems control is described
Shifts in shuttle SRM performance because of ammonium perchlorate crystal shape on missions 51-I/J and 61-A/B
The design of the Space Shuttle vehicle configuration requires that the SRMs produce thrust within tightly-controlled limits. These limits provide assurance that Shuttle ascent performance goals will be achieved within the vehicle flight load constraints. The SRM's will perform within these limits if overall SRM reproducibility is maintained. This report will initially describe the excellent performance reproducibility of the 24 SRMs during the first 12 flights STS-8 through STS-26 (Mission 51-F) using the HPM SRM. Secondly, this report will describe the transient phenomena which interrupted the reproducibility in the first 20 sec of flight for four flights (Missions 51-I/J and 61-A/B). The cause of this 20 sec phenomena is postulated to be a change in the crystal shape of the ammonium perchlorate used in the propellant. This shape change coincided with the performance shift on these four flights. The ballistic effect of the crystal shape change is manifested as a change to the generic HUMP or BARF curve of the Shuttle SRM thrust/pressure-time curve. As the crystal shape change was corrected by the vendor, the performance produced by the Shuttle SRM returned to normal
Space shuttle afterbody aerodynamics/plume simulation data summary
A series of parametric wind tunnel tests was conducted to provide a base for developing a simulation of afterbody/base aerodynamics for multibody/multibase rocket-powered vehicles (such as Space Shuttle) which use unheated air as the simulant gas in development wind tunnel tests. The tests described were parameterized on external configuration, nozzle internal configuration, base geometry, propulsion gas type, and freestream Mach number (0.5 to 3.5). The tests were conducted over a 4-year period. Presented in this report are the data and pertinent reference information necessary to perform an analysis which would lead to a simulation procedure. The type of data obtained during the tests described herein include model base afterbody, and nozzle internal surface static pressure distributions, model chamber pressure and temperature, and freestream conditions. Also included is a brief description of simulation procedures that were used by the Space Shuttle program
Space Shuttle booster thrust imbalance analysis
An analysis of the Shuttle SRM thrust imbalance during the steady-state and tailoff portions of the boost phase of flight are presented. Results from flights STS-1 through STS-13 are included. A statistical analysis of the observed thrust imbalance data is presented. A 3 sigma thrust imbalance history versus time was generated from the observed data and is compared to the vehicle design requirements. The effect on Shuttle thrust imbalance from the use of replacement SRM segments is predicted. Comparisons of observed thrust imbalances with respect to predicted imbalances are presented for the two space shuttle flights which used replacement aft segments (STS-9 and STS-13)
Space shuttle launch vehicle performance trajectory, exchange ratios, and dispersion analysis
A baseline space shuttle performance trajectory for Mission 3A launched from WTR has been generated. Design constraints of maximum dynamic pressure, longitudinal acceleration, and delivered payload were satisfied. Payload exchange ratios are presented with explanation on use. Design envelopes of dynamic pressure, SRB staging point, aerodynamic heating and flight performance reserves are calculated and included
The aerodynamic design of an advanced rotor airfoil
An advanced rotor airfoil, designed utilizing supercritical airfoil technology and advanced design and analysis methodology is described. The airfoil was designed subject to stringent aerodynamic design criteria for improving the performance over the entire rotor operating regime. The design criteria are discussed. The design was accomplished using a physical plane, viscous, transonic inverse design procedure, and a constrained function minimization technique for optimizing the airfoil leading edge shape. The aerodynamic performance objectives of the airfoil are discussed
Elemental Abundance Ratios in Stars of the Outer Galactic Disk. II. Field Red Giants
We summarize a selection process to identify red giants in the direction of
the southern warp of the Galactic disk, employing VI_C photometry and
multi-object spectroscopy. We also present results from follow-up
high-resolution, high-S/N echelle spectroscopy of three field red giants,
finding [Fe/H] values of about -0.5. The field stars, with Galactocentric
distances estimated at 10 to 15 kpc, support the conclusion of Yong, Carney, &
de Almeida (2005) that the Galactic metallicity gradient disappears beyond R_GC
values of 10 to 12 kpc for the older stars and clusters of the outer disk. The
field and cluster stars at such large distances show very similar abundance
patterns, and, in particular, all show enhancements of the "alpha" elements O,
Mg, Si, Ca, and Ti and the r-process element Eu. These results suggest that
Type II supernovae have been significant contributors to star formation in the
outer disk relative to Type Ia supernovae within the past few Gyrs. We also
compare our results with those available for much younger objects. The limited
results for the H II regions and B stars in the outer disk also suggest that
the radial metallicity gradient in the outer disk is shallow or absent. The
much more extensive results for Cepheids confirm these trends, and that the
change in slope of the metallicity gradient may occur at a larger
Galactocentric distance than for the older stars and clusters. However, the
younger stars also show rising alpha element enhancements with increasing R_GC,
at least beyond 12 kpc. These trends are consistent with the idea of a
progressive growth in the size of the Galactic disk with time, and episodic
enrichment by Type II supernovae as part of the disk's growth. [Abridged]Comment: Accepted for publication in A
Oxygen Abundances in Two Metal-Poor Subgiants from the Analysis of the 6300 A Forbidden O I Line
Recent LTE analyses (Israelian et al. 1998 and Bosegaard et al. 1999) of the
OH bands in the optical-ultraviolet spectra of nearby metal-poor subdwarfs
indicate that oxygen abundances are generally higher than those previously
determined. The difference increases with decreasing metallicity and reaches
delta([O/Fe]) ~ +0.6 dex as [Fe/H] approaches -3.0.
Employing high resolution (R = 50000), high S/N (~ 250) echelle spectra of
the two stars found by Israelian et al. (1998) to have the highest
[O/Fe]-ratios, viz, BD +23 3130 and BD +37 1458, we conducted abundance
analyses based on about 60 Fe I and 7-9 Fe II lines. We determined from Kurucz
LTE models the values of the stellar parameters, as well as abundances of Na,
Ni, and the traditional alpha-elements, independent of the calibration of color
vs scales. We determined oxygen abundances from spectral synthesis of
the stronger line (6300 A) of the [O I] doublet.
The syntheses of the [O I] line lead to smaller values of [O/Fe], consistent
with those found earlier among halo field and globular cluster giants. We
obtain [O/Fe] = +0.35 +/- 0.2 for BD +23 3130 and +0.50 +/- 0.2 for BD +37
1458. In the former, the [O I] line is very weak (~ 1 mA), so that the quoted
[O/Fe] value may in reality be an upper limit.
Therefore in these two stars a discrepancy exists between the [O/Fe]- ratios
derived from [O I] and the OH feature, and the origin of this difference
remains unclear. Until the matter is clarified, we suggest it is premature to
conclude that the ab initio oxygen abundances of old, metal-poor stars need to
be revised drastically upward.Comment: 38 pages, 5 tables, 14 figures To appear in July 1999 AJ Updated
April 16, 1999. Fixed typo
- …