500 research outputs found

    Birth Kick Distributions and the Spin-Kick Correlation of Young Pulsars

    Full text link
    Evidence from pulsar wind nebula symmetry axes and radio polarization observations suggests that pulsar motions correlate with the spin directions. We assemble this evidence for young isolated pulsars and show how it can be used to quantitatively constrain birth kick scenarios. We illustrate by computing several plausible, but idealized, models where the momentum thrust is proportional to the neutrino cooling luminosity of the proto-neutron star. Our kick simulations include the effects of pulsar acceleration and spin-up and our maximum likelihood comparison with the data constrains the model parameters. The fit to the pulsar spin and velocity measurements suggests that: i) the anisotropic momentum required amounts to ~10% of the neutrino flux, ii) while a pre-kick spin of the star is required, the preferred magnitude is small 10-20rad/s, so that for the best-fit models iii) the bulk of the spin is kick-induced with Ωˉ\bar \Omega ~120rad/s and iv) the models suggest that the anisotropy emerges on a timescale τ\tau ~1-3s.Comment: 37 pages, 13 figures, ApJ accepte

    Downgrade of cardiac defibrillator devices to pacemakers in elderly heart failure patients:clinical considerations and the importance of shared decision-making

    Get PDF
    Implantable cardioverter defibrillators are implanted on a large scale in patients with heart failure (HF) for the prevention of sudden cardiac death. There are different scenarios in which defibrillator therapy is no longer desired or indicated, and this is occurring increasingly in elderly patients. Usually device therapy is continued until the device has reached battery depletion. At that time, the decision needs to be made to either replace it or to downgrade to a pacing-only device. This decision is dependent on many factors, including the vitality of the patient and his/her preferences, but may also be influenced by changes in recommendations in guidelines. In the last few years, there has been an increased awareness that discussions around these decisions are important and useful. Advanced care planning and shared decision-making have become important and are increasingly recognised as such. In this short review we describe six elderly patients with HF, in whose cases we discussed these issues, and we aim to provide some scientific and ethical rationale for clinical decision-making in this context. Current guidelines advocate the discussion of end-of-life options at the time of device implantation, and physicians should realise that their choices influence patients' options in this critical phase of their illness

    Laser powder bed fusion of 17–4 PH stainless steel:A comparative study on the effect of heat treatment on the microstructure evolution and mechanical properties

    Get PDF
    17–4 PH (precipitation hardening) stainless steel is commonly used for the fabrication of complicated molds with conformal cooling channels using laser powder bed fusion process (L-PBF). However, their microstructure in the as-printed condition varies notably with the chemical composition of the feedstock powder, resulting in different age-hardening behavior. In the present investigation, 17–4 PH stainless steel components were fabricated by L-PBF from two different feedstock powders, and subsequently subjected to different combinations of post-process heat treatments. It was observed that the microstructure in as-printed conditions could be almost fully martensitic or ferritic, depending on the ratio of Creq/Nieq of the feedstock powder. Aging treatment at 480 °C improved the yield and ultimate tensile strengths of the as-printed components. However, specimens with martensitic structures exhibited accelerated age-hardening response compared with the ferritic specimens due to the higher lattice distortion and dislocation accumulation, resulting in the “dislocation pipe diffusion mechanism”. It was also found that the martensitic structures were highly susceptible to the formation of reverted austenite during direct aging treatment, where 19.5% of austenite phase appeared in the microstructure after 15 h of direct aging. Higher fractions of reverted austenite activates the transformation induced plasticity and improves the ductility of heat treated specimens. The results of the present study can be used to tailor the microstructure of the L-PBF printed 17–4 PH stainless steel by post-process heat treatments to achieve a good combination of mechanical properties

    A Radial Velocity Survey of the Cygnus OB2 Association

    Get PDF
    We conducted a radial velocity survey of the Cygnus OB2 Association over a 6 year (1999 - 2005) time interval to search for massive close binaries. During this time we obtained 1139 spectra on 146 OB stars to measure mean systemic radial velocities and radial velocity variations. We spectroscopically identify 73 new OB stars for the first time, the majority of which are likely to be Association members. Spectroscopic evidence is also presented for a B3Iae classification and temperature class variation (B3 - B8) on the order of 1 year for Cygnus OB2 No. 12. Calculations of the intial mass function with the current spectroscopic sample yield Gamma = -2.2 +/- 0.1. Of the 120 stars with the most reliable data, 36 are probable and 9 are possible single-lined spectroscopic binaries. We also identify 3 new and 8 candidate double-lined spectroscopic binaries. These data imply a lower limit on the massive binary fraction of 30% - 42%. The calculated velocity dispersion for Cygnus OB2 is 2.44 +/- km/s, which is typical of open clusters. No runaway OB stars were found.Comment: 56 pages, 23 figures, 5 tables, accepted for publication in the Astrophysical Journa

    XMM-Newton observation of PSR B2224+65 and its jet

    Full text link
    We have investigated the pulsar PSR B2224+65 and its X-ray jet with XMM-Newton. Apart from the long X-ray jet which is almost perpendicular to the direction of proper motion, a putative extended feature at the pulsar position, which oriented in the opposite direction of the proper motion, is also suggested by this deep X-ray imaging. Non-detection of any coherent X-ray pulsation disfavors the magnetospheric origin of the X-rays observed from the position of PSR B2224+65 and hence suggest that the interpretation of pulsar wind nebula is more viable. We have also probed the origin of PSR B2224+65 and identified a runaway star, which possibly originated from the Cygnus OB9 association, as a candidate for the former binary companion of the neutron star's progenitor.Comment: 24 pages, 8 figures, 3 tables, accepted for publication in Ap

    Hyperfast pulsars as the remnants of massive stars ejected from young star clusters

    Get PDF
    Recent proper motion and parallax measurements for the pulsar PSR B1508+55 indicate a transverse velocity of ~1100 km/s, which exceeds earlier measurements for any neutron star. The spin-down characteristics of PSR B1508+55 are typical for a non-recycled pulsar, which implies that the velocity of the pulsar cannot have originated from the second supernova disruption of a massive binary system. The high velocity of PSR B1508+55 can be accounted for by assuming that it received a kick at birth or that the neutron star was accelerated after its formation in the supernova explosion. We propose an explanation for the origin of hyperfast neutron stars based on the hypothesis that they could be the remnants of a symmetric supernova explosion of a high-velocity massive star which attained its peculiar velocity (similar to that of the pulsar) in the course of a strong dynamical three- or four-body encounter in the core of dense young star cluster. To check this hypothesis we investigated three dynamical processes involving close encounters between: (i) two hard massive binaries, (ii) a hard binary and an intermediate-mass black hole, and (iii) a single star and a hard binary intermediate-mass black hole. We find that main-sequence O-type stars cannot be ejected from young massive star clusters with peculiar velocities high enough to explain the origin of hyperfast neutron stars, but lower mass main-sequence stars or the stripped helium cores of massive stars could be accelerated to hypervelocities. Our explanation for the origin of hyperfast pulsars requires a very dense stellar environment of the order of 10^6 -10^7 stars pc^{-3}. Although such high densities may exist during the core collapse of young massive star clusters, we caution that they have never been observed.Comment: 11 pages, 6 figures, 1 table, accepted to MNRA

    Identifying birth places of young isolated neutron stars

    Full text link
    Young isolated radio-quiet neutron stars are still hot enough to be detectable at X-ray and optical wavelengths due to their thermal emission and can hence probe cooling curves. An identification of their birth sites can constrain their age. For that reason we try to identify the parent associations for four of the so-called Magnificent Seven neutron stars for which proper motion and distance estimates are available. We are tracing back in time each neutron star and possible birth association centre to find close encounters. The associated time of the encounter expresses the kinematic age of the neutron star which can be compared to its characteristic spin-down age. Owing to observational uncertainties in the input data, we use Monte-Carlo simulations and evaluate the outcome of our calculations statistically. RX J1856.5-3754 most probably originated from the Upper Scorpius association about 0.3 Myr ago. RX 0720.4-3125 was either born in the young local association TWA about 0.4 Myr ago or in Tr 10 0.5 Myr in the past. Also RX J1605.3+3249 and RBS 1223 seem to come from a nearby young association such as the Sco-Cen complex or the extended Corona-Australis association. For RBS 1223 also a birth in Sct OB2 is possible. We also give constraints on the observables as well as on the radial velocity of the neutron star. Given the birth association, its age and the flight time of the neutron star, we estimate the mass of the progenitor star. Some of the potential supernovae were located very nearby (<100pc) and thus should have contributed to the 10Be and 60Fe material found in the Earth's crust. In addition we reinvestigate the previously suggested neutron star/ runaway pair PSR B1929+10/ zeta Ophiuchi and conclude that it is very likely that both objects were ejected during the same supernova event.Comment: 14 figures, 13 table
    • 

    corecore