189 research outputs found

    Criteria for the assessment of analyser practicability

    Get PDF
    This article lists the theoretical criteria that need to be considered to assess the practicability of an automatic analyser. Two essential sets of criteria should be taken into account when selecting an automatic analyser: ‘reliability’ and ‘practicability’. Practibility covers the features that provide information about the suitability of an analyser for specific working conditions

    Evaluation of the IL-Phoenix chemistry electrolyte analyser

    Get PDF
    This paper reports an evaluation of the IL-Phoenix Chemistry/Electrolyte Analyser; the evaluation was carried out in accordance with internationally recognized guidelines. The evaluation was performed in three steps: evaluation in routine conditions; assessment of interferences; and study of practicability. Seven constituents were studied under routine working conditions. Within-run imprecision rangedfrom 0.6% (CV) for chloride to 3.1% (CV) for glucose. Between-run imprecision ranged from 0.9% for sodium to 6.0% (CV) for urea. Sample-related carryover was not significant. The relative inaccuracy was acceptable; drift was negligible; linearity was agreed with the range showed by the supplier. Haemoglobin produced negative interferences with sodium and chloride. Turbidity interfered negatively with sodium, chloride, potassium and total calcium, andpositively with glucose. Bilirubin showed a negative interference with sodium, chloride and creatinine

    SAGIMA: An Easy-to-Use and Low Cost WEB-PACS System for an Optimal Access and Management of a Digital Angiography Database

    Get PDF
    Over several years, digital angiography studies from the Hemodynamic Unit of the Hospital Clínico Universitario (Valencia, Spain) have been stored in CD’s using first revisions of DICOM 3.0. In order to centralize the management and facilitate the access to these studies and reports, an easy to use and low cost WEB-PACS system that we have called SAGIMA has been developed in close collaboration between the BET Research Group of the Universitat Politècnica de València and the Cardiology Department of the Hospital Clínic

    Computationally Guided Design of a Readily Assembled Phosphite- Thioether Ligand for a Broad Range of Pd-Catalyzed Asymmetric Allylic Substitutions

    Get PDF
    A modular approach employing indene as common starting material, has enabled the straightforward preparation in three reaction steps of P-thioether ligands for the Pd-catalyzed asymmetric allylic substitution. The analysis of a starting library of P-thioether ligands based on rational design and theoretical calculations has led to the discovery of an optimized anthracenethiol derivative with excellent behavior in the reaction of choice. Improving most approaches reported to date, this ligand presents a broad substrate and nucleophile scope. Excellent enantioselectivities have been achieved for a range of linear and cyclic allylic substrates using a large number of C-, N-, and O-nucleophiles (40 compounds in total). The species responsible for the catalytic activity have been further investigated by NMR in order to clearly establish the origin of the enantioselectivity. The resulting products have been derivatized by means of ring-closing metathesis or Pauson–Khand reactions to further prove the synthetic versatility of the methodology for preparing enantiopure complex structures

    Experimental investigation of the temperatures and performance of a commercial ice-storage tank

    Full text link
    [EN] This paper presents the results of an experimental installation with an internal melt-ice-on-coil tank which has a total capacity of 172 kWh. The aim of this work is to analyse the freezing process in a tank with counter-current spiral-shaped coils immersed in around 1855l water. An experimental campaign has been performed with different inlet temperatures and mass flow rates of the heat transfer fluid. This study analyses (i) the chiller performance, (ii) the ice-formation process and (iii) the energy consumption of the installation. Supply temperatures between 2.5 C and 5.2 C have been sufficient to charge the tank without using any nucleating agents. The lowest energy consumption has been achieved for the fastest charging tests.The authors gratefully acknowledge ACCIONA Infraestructuras for the financing support and collaboration. Parts of the experimental results used in this work were collected at Federico II University during the project "Layout d'impianto e metodi di controllo innovativi per la refrigerazione domestica, commerciale e professionale". A.W. Mauro acknowledges the financial support provided by Regione Campania.López-Navarro, A.; Biosca Taronger, J.; Torregrosa-Jaime, B.; Martínez Galván, IO.; Corberán, JM.; Esteban-Matías, JC.; Payá-Herrero, J. (2012). Experimental investigation of the temperatures and performance of a commercial ice-storage tank. International Journal of Refrigeration. 36(4):1310-1318. doi:10.1016/j.ijrefrig.2012.09.008S1310131836

    Who knows best? A Q methodology study to explore perspectives of professional stakeholders and community participants on health in low-income communities

    Get PDF
    Abstract Background Health inequalities in the UK have proved to be stubborn, and health gaps between best and worst-off are widening. While there is growing understanding of how the main causes of poor health are perceived among different stakeholders, similar insight is lacking regarding what solutions should be prioritised. Furthermore, we do not know the relationship between perceived causes and solutions to health inequalities, whether there is agreement between professional stakeholders and people living in low-income communities or agreement within these groups. Methods Q methodology was used to identify and describe the shared perspectives (‘subjectivities’) that exist on i) why health is worse in low-income communities (‘Causes’) and ii) the ways that health could be improved in these same communities (‘Solutions’). Purposively selected individuals (n = 53) from low-income communities (n = 25) and professional stakeholder groups (n = 28) ranked ordered sets of statements – 34 ‘Causes’ and 39 ‘Solutions’ – onto quasi-normal shaped grids according to their point of view. Factor analysis was used to identify shared points of view. ‘Causes’ and ‘Solutions’ were analysed independently, before examining correlations between perspectives on causes and perspectives on solutions. Results Analysis produced three factor solutions for both the ‘Causes’ and ‘Solutions’. Broadly summarised these accounts for ‘Causes’ are: i) ‘Unfair Society’, ii) ‘Dependent, workless and lazy’, iii) ‘Intergenerational hardships’ and for ‘Solutions’: i) ‘Empower communities’, ii) ‘Paternalism’, iii) ‘Redistribution’. No professionals defined (i.e. had a significant association with one factor only) the ‘Causes’ factor ‘Dependent, workless and lazy’ and the ‘Solutions’ factor ‘Paternalism’. No community participants defined the ‘Solutions’ factor ‘Redistribution’. The direction of correlations between the two sets of factor solutions – ‘Causes’ and ‘Solutions’ – appear to be intuitive, given the accounts identified. Conclusions Despite the plurality of views there was broad agreement across accounts about issues relating to money. This is important as it points a way forward for tackling health inequalities, highlighting areas for policy and future research to focus on

    Firm dynamics and job creation in the United Kingdom:1998–2013

    Get PDF
    This article is motivated by a very simple question – ‘what types of firms create the most jobs in the UK economy?’ One popular answer to this question has been High-Growth Firms (HGFs). These firms represent only a small minority – the ‘Vital 6%’ – of the UK business population yet, but have a disproportionate impact on job creation and innovation. We re-visit the discussion launched by the 2009 National Endowment for Science, Technology and the Arts (NESTA) reports, which identified the 6% figure and, using more recent data, confirm the headline conclusion for job creation: a small number of job-creating firms (mostly small firms) are responsible for a significant amount of net job creation in the United Kingdom. Adopting our alternative preferred analytical approach, which involves tracking the growth performance of cohorts of start-ups confirms this conclusion; however, we find an even smaller number of job-creating firms are responsible for a very significant proportion of job creation. We conclude by considering the question – ‘what are the implications for policy choices?’

    Performance characterization of a PCM storage tank

    Full text link
    This paper presents the experimental results of a versatile latent heat storage tank capable of working with organic phase-change materials within a temperature range from -10 °C to 100 °C. The tank contains a paraffin with a phase-change temperature between 3 °C and 8 °C. Firstly, this study focuses on explaining the design criteria which were followed to build the tank. Secondly, a full experimental characterization of the performance has been carried out. The enthalpy temperature curve, the specific heat and density have been measured for the tested paraffin. The performance of the tank has been analyzed in terms of the vertical stratification within the PCM, the effectiveness, the reacted fraction and the total heat transfer of the tank. The results indicate that up to 78% of the maximum capacity is reached within 4 h. The performance is mainly controlled by the supply temperature and the effect of the mass flow rate is almost negligible given that all the tests are in laminar flow.The authors from the Polytechnic University of Valencia gratefully acknowledge ACCIONA Infraestructuras for the funding of the LHTS installation. The authors from University of Zaragoza would like to thank the Spanish Government for the partial funding of this work within the framework of research projects ENE2008-06687-C02-02 and ENE2011-28269-C03-01.López Navarro, A.; Biosca Taronger, J.; Corberán Salvador, JM.; Peñalosa, C.; Lázaro, A.; Dolado, P.; Payá Herrero, J. (2014). Performance characterization of a PCM storage tank. Applied Energy. 119:151-162. doi:10.1016/j.apenergy.2013.12.041S15116211

    Predicting serious complications in patients with cancer and pulmonary embolism using decision tree modelling: the EPIPHANY Index

    Get PDF
    Background: Our objective was to develop a prognostic stratification tool that enables patients with cancer and pulmonary embolism (PE), whether incidental or symptomatic, to be classified according to the risk of serious complications within 15 days. Methods: The sample comprised cases from a national registry of pulmonary thromboembolism in patients with cancer (1075 patients from 14 Spanish centres). Diagnosis was incidental in 53.5% of the events in this registry. The Exhaustive CHAID analysis was applied with 10-fold crossvalidation to predict development of serious complications following PE diagnosis. Results: About 208 patients (19.3%, 95% confidence interval (CI), 17.1-21.8%) developed a serious complication after PE diagnosis. The 15-day mortality rate was 10.1%, (95% CI, 8.4-12.1%). The decision tree detected six explanatory covariates: Hestia-like clinical decision rule (any risk criterion present vs none), Eastern Cooperative Group performance scale (ECOG-PS; = 2), O-2 saturation (= 90%), presence of PE-specific symptoms, tumour response (progression, unknown, or not evaluated vs others), and primary tumour resection. Three risk classes were created (low, intermediate, and high risk). The risk of serious complications within 15 days increases according to the group: 1.6, 9.4, 30.6%; P<0.0001. Fifteen-day mortality rates also rise progressively in low-, intermediate-, and high-risk patients: 0.3, 6.1, and 17.1%; P<0.0001. The cross-validated risk estimate is 0.191 (s.e. = 0.012). The optimism-corrected area under the receiver operating characteristic curve is 0.779 (95% CI, 0.717-0.840). Conclusions: We have developed and internally validated a prognostic index to predict serious complications with the potential to impact decision-making in patients with cancer and PE
    • …
    corecore