The spatiotemporal features of Greenhouse Gases Emissions from Biomass Burning in China from 2000-2012

Greenhouse gases emissions from biomass burning have been given a little attention, especially the spatiotemporal features of biomass burning sources and greenhouse gases emissions have not been comprehensively uncovered. This research undertook IPCC bottom-up inventory guideline to estimate Chinese greenhouse gases emissions from biomass burning and applied geographical information system to reveal biomass burning emissions spatiotemporal features. The purposes were to quantify greenhouse gases emissions from various biomass burning sources and to uncover the spatial and temporal emissions features so to deliver future policy implications in China. The results showed that the average annual biomass burning emissions in China from 2000-2012 were 880.66 Mt for CO2, 96.59 Mt CO2-eq for CH4, and 16.81 Mt CO2-eq for N2O. The spatial pattern of biomass greenhouse gases emissions showed about 50 % of national emission were in the east and south-central regions. The majority of biomass burning emissions were from firewood and crop residues, which accounted for more than 90 % of national biomass burning emissions. All types of biomass burning emissions exhibited similar temporal trends from 2000-2012, with strong inter-annual variability and fluctuant increase. The large grassland and forest fires induced the significant greenhouse gases emissions peaks in the years of 2001, 2003 and 2006. We found that biofuel burning, with low combustion efficiency, is the major emission source. Open burning of biomass was widespread in China, and east and south-central regions were the major distribution of biomass burning greenhouse gases emission. Optimized design for improving the efficiency of biomass utilization and making emission control policy combination with its spatiotemporal features will be the effective way to reduce the biomass burning emissions

The role of autophagy in cardiovascular disease: Cross-interference of signaling pathways and underlying therapeutic targets

Autophagy is a conserved lysosomal pathway for the degradation of cytoplasmic proteins and organelles, which realizes the metabolic needs of cells and the renewal of organelles. Autophagy-related genes (ATGs) are the main molecular mechanisms controlling autophagy, and their functions can coordinate the whole autophagic process. Autophagy can also play a role in cardiovascular disease through several key signaling pathways, including PI3K/Akt/mTOR, IGF/EGF, AMPK/mTOR, MAPKs, p53, Nrf2/p62, Wnt/β-catenin and NF-κB pathways. In this paper, we reviewed the signaling pathway of cross-interference between autophagy and cardiovascular diseases, and analyzed the development status of novel cardiovascular disease treatment by targeting the core molecular mechanism of autophagy as well as the critical signaling pathway. Induction or inhibition of autophagy through molecular mechanisms and signaling pathways can provide therapeutic benefits for patients. Meanwhile, we hope to provide a unique insight into cardiovascular treatment strategies by understanding the molecular mechanism and signaling pathway of crosstalk between autophagy and cardiovascular diseases

Comparative Transcriptomic Analysis of Regenerated Skins Provides Insights into Cutaneous Air-Breathing Formation in Fish

Cutaneous air-breathing is one of the air-breathing patterns in bimodal respiration fishes, while little is known about its underlying formation mechanisms. Here, we first investigated the skin regeneration of loach (Misgurnus anguillicaudatus, a cutaneous air-breathing fish) and yellow catfish (Pelteobagrus fulvidraco, a water-breathing fish) through morphological and histological observations. Then, the original skins (OS: MOS, POS) and regenerated skins (RS: MRS, PRS) when their capillaries were the most abundant (the structural foundation of air-breathing in fish) during healing, of the two fish species were collected for high-throughput RNA-seq. A total of 56,054 unigenes and 53,731 unigenes were assembled in loach and yellow catfish, respectively. A total of 640 (460 up- and 180 down-regulated) and 4446 (2340 up- and 2106 down-regulated) differentially expressed genes (DEGs) were respectively observed in RS/OS of loach and yellow catfish. Subsequently, the two DEG datasets were clustered in GO, KOG and KEGG databases, and further analyzed by comparison and screening. Consequently, tens of genes and thirteen key pathways were targeted, indicating that these genes and pathways had strong ties to cutaneous skin air-breathing in loach. This study provides new insights into the formation mechanism of cutaneous air-breathing and also offers a substantial contribution to the gene expression profiles of skin regeneration in fish

Reduced graphene oxide directed self-assembly of phospholipid monolayers in liquid and gel phases

The response of cell membranes to the local physical environment significantly determines many biological processes and the practical applications of biomaterials. A better understanding of the dynamic assembly and environmental response of lipid membranes can help understand these processes and design novel nanomaterials for biomedical applications. The present work demonstrates the directed assembly of lipid monolayers, in both liquid and gel phases, on the surface of a monolayered reduced graphene oxide (rGO). The results from atomic force microscopy indicate that the hydrophobic aromatic plane and the defect holes due to reduction of GO sheets, along with the phase state and planar surface pressure of lipids, corporately determine the morphology and lateral structure of the assembled lipid monolayers. The DOPC molecules, in liquid phase, probably spread over the rGO surface with their tails associating closely with the hydrophobic aromatic plane, and accumulate to form circles of high area surrounding the defect holes on rGO sheets. However, the DPPC molecules, in gel phase, prefer to form a layer of continuous membrane covering the whole rGO sheet including defect holes. The strong association between rGO sheets and lipid tails further influences the melting behavior of lipids. This work reveals a dramatic effect of the local structure and surface property of rGO sheets on the substrate-directed assembly and subsequent phase behavior of the supported lipid membranes

Self-assembly of monolayered lipid membranes for surface-coating of a nanoconfined Bombyx mori silk fibroin film

Regenerated Bombyx mori (B. mori) silk fibroin is a type of widely used biomaterial. The β-sheet structure of it after methanol treatment provides water-insolubility and mechanical stability while on the other side leads to a hydrophobic surface which is less preferred by biological systems. In this work we prepare a novel type of nanoconfined silk fibroin film with a thickness below 100 nm. The film has a flat while hydrophobic surface because of its β-sheet structure due to the z-direction confinement during formation. Different types of lipid monolayers, DOPC, DPPC and MO, are assembled on the silk film surface. The lipid coating, especially the DPPC membrane, provides a much smoother and more hydrophilic surface due to the gel phase tails of the lipids, in comparison with the DOPC and MO ones which are in a liquid phase and have a much stronger interfacial association between silk film surface and lipid tails. Such a lipid coating preserves the biocompatibility and cellular affinity of the silk film which promises potential applications as surface coatings for materials for biological use

Global CO2 uptake by cement from 1930 to 2019

Because of the alkaline nature and high calcium content of cements in general, they serve as a CO2- absorbing agent through carbonation processes, resembling silicate weathering in nature. This carbon uptake capacity of cements could abate some of the CO2 emitted during their production. Given the scale of cement production worldwide (4.10 Gt in 2019), a life-cycle assessment is necessary to determine the actual net carbon impacts of this industry. We adopted a comprehensive analytical model to estimate the amount of CO2 that had been absorbed from 1930 to 2019 in four types of cement materials, including concrete, mortar, construction waste, and cement kiln dust (CKD). In addition, the process CO2 emission during the same period based on the same datasets was also estimated. The results show that 21.02 Gt CO2 (95 % confidence interval, CI: 18.01– 24.41 Gt CO2) had been absorbed in the cements produced from 1930 to 2019, with the 2019 annual figure mounting up to 0.89 Gt CO2 yr−1 (95 % CI: 0.76–1.06 Gt CO2). The cumulative uptake is equivalent to approximately 55 % of the process emission based on our estimation. In particular, China’s dominant position in cement production or consumption in recent decades also gives rise to its uptake being the greatest, with a cumulative sink of 6.21 Gt CO2 (95 % CI: 4.59–8.32 Gt CO2) since 1930. Among the four types of cement materials, mortar is estimated to be the greatest contributor (approximately 59 %) to the total uptake. Potentially, our cement emission and uptake estimation system can be updated annually and modified when necessary for future low-carbon transitions in the cement industry. All the data described in this study, including the Monte Carlo uncertainty analysis results, are accessible at https://doi.org/10.5281/zenodo.4459729 (Wang et al., 2021)