Statistical properties of one dimensional attractive Bose gas

Using classical field approximation we present the first study of statistical properties of one dimensional Bose gas with attractive interaction. The canonical probability distribution is generated with the help of a Monte Carlo method. This way we obtain not only the depletion of the condensate with growing temperature but also its fluctuations. The most important is our discovery of a reduced coherence length, the phenomenon observed earlier only for the repulsive gas, known as quasicondensation.Comment: 4 pages, 4 figure

Star forming galaxies in the AKARI deep field south : identifications and spectral energy distributions

Aims. We investigate the nature and properties of far-infrared (FIR) sources in the AKARI deep field south (ADF-S). Methods. We performed an extensive search for the counterparts to 1000 ADF-S objects brighter than 0.0301 Jy in the WIDE-S (90 μm) AKARI band in the public databases (NED and SIMBAD). We analyzed the properties of the resulting sample: statistics of the identified objects, quality of position determination of the ADF-S sources, their number counts, redshift distribution, and comparison of morphological types, when the corresponding information was available. We performed a simplifield analysis of the clustering properties of the ADF-S sources and compliled spectral energy distributions (SEDs) of objects with the highest quality photometry, using three different models. Results. Among 1000 investigated ADF-S sources, 545 were identified with sources at other wavelengths in public databases. From them, 518 are known galaxies and 343 of these were previously known as infra-red sources. Among the remaining sources, there are two quasars and both infrared and radio sources of unknown origin. Among six stellar identifications, at least five are probably the effect of contamination. We measured the redshifts of 48 extragalactic objects and determined the morphological types of 77 galaxies. We present SED models of 47 sources with sufficiently good photometric data. Conclusions. We conclude that the bright FIR point sources observed in the ADF-S are mostly nearby galaxies. Their properties are very similar to the properties of the local population of optically bright galaxies, except for unusually high ratio of peculiar or interacting objects and a lower percentage of elliptical galaxies. The percentage of lenticular galaxies is the same as in the optically bright population, which suggests that galaxies of this type may frequently contain a significant amount of cool dust. It is possible that source confusion plays a significant role in more than 34% of measurements. The SEDs correspond to a variety of galaxy types, from very actively star forming to very quiescent. The AKARI long wavelength bands data have enabled us to determine for the first time that these galaxies are objects with very cool dust

Enhancement of Rydberg-mediated single-photon nonlinearities by electrically tuned Förster resonances

We demonstrate experimentally that Stark-tuned Förster resonances can be used to substantially increase the interaction between individual photons mediated by Rydberg interaction inside an optical medium. This technique is employed to boost the gain of a Rydberg-mediated single-photon transistor and to enhance the non-destructive detection of single Rydberg atoms. Furthermore, our all-optical detection scheme enables high-resolution spectroscopy of two-state Förster resonances, revealing the fine structure splitting of high-n Rydberg states and the non-degeneracy of Rydberg Zeeman substates in finite fields. We show that the ∣50S1/2,48S1/2⟩↔∣49P1/2,48P1/2⟩ pair state resonance in 87Rb enables simultaneously a transistor gain G>100 and all-optical detection fidelity of single Rydberg atoms F>0.8. We demonstrate for the first time the coherent operation of the Rydberg transistor with G>2 by reading out the gate photon after scattering source photons. Comparison of the observed readout efficiency to a theoretical model for the projection of the stored spin wave yields excellent agreement and thus successfully identifies the main decoherence mechanism of the Rydberg transistor

Prognostic model to predict postoperative acute kidney injury in patients undergoing major gastrointestinal surgery based on a national prospective observational cohort study.

Background: Acute illness, existing co-morbidities and surgical stress response can all contribute to postoperative acute kidney injury (AKI) in patients undergoing major gastrointestinal surgery. The aim of this study was prospectively to develop a pragmatic prognostic model to stratify patients according to risk of developing AKI after major gastrointestinal surgery. Methods: This prospective multicentre cohort study included consecutive adults undergoing elective or emergency gastrointestinal resection, liver resection or stoma reversal in 2-week blocks over a continuous 3-month period. The primary outcome was the rate of AKI within 7 days of surgery. Bootstrap stability was used to select clinically plausible risk factors into the model. Internal model validation was carried out by bootstrap validation. Results: A total of 4544 patients were included across 173 centres in the UK and Ireland. The overall rate of AKI was 14·2 per cent (646 of 4544) and the 30-day mortality rate was 1·8 per cent (84 of 4544). Stage 1 AKI was significantly associated with 30-day mortality (unadjusted odds ratio 7·61, 95 per cent c.i. 4·49 to 12·90; P < 0·001), with increasing odds of death with each AKI stage. Six variables were selected for inclusion in the prognostic model: age, sex, ASA grade, preoperative estimated glomerular filtration rate, planned open surgery and preoperative use of either an angiotensin-converting enzyme inhibitor or an angiotensin receptor blocker. Internal validation demonstrated good model discrimination (c-statistic 0·65). Discussion: Following major gastrointestinal surgery, AKI occurred in one in seven patients. This preoperative prognostic model identified patients at high risk of postoperative AKI. Validation in an independent data set is required to ensure generalizability

Sex- and age-related differences in the management and outcomes of chronic heart failure: an analysis of patients from the ESC HFA EORP Heart Failure Long-Term Registry

Aims: This study aimed to assess age- and sex-related differences in management and 1-year risk for all-cause mortality and hospitalization in chronic heart failure (HF) patients. Methods and results: Of 16 354 patients included in the European Society of Cardiology Heart Failure Long-Term Registry, 9428 chronic HF patients were analysed [median age: 66 years; 28.5% women; mean left ventricular ejection fraction (LVEF) 37%]. Rates of use of guideline-directed medical therapy (GDMT) were high (angiotensin-converting enzyme inhibitors/angiotensin receptor blockers, beta-blockers and mineralocorticoid receptor antagonists: 85.7%, 88.7% and 58.8%, respectively). Crude GDMT utilization rates were lower in women than in men (all differences: P\ua0 64 0.001), and GDMT use became lower with ageing in both sexes, at baseline and at 1-year follow-up. Sex was not an independent predictor of GDMT prescription; however, age >75 years was a significant predictor of GDMT underutilization. Rates of all-cause mortality were lower in women than in men (7.1% vs. 8.7%; P\ua0=\ua00.015), as were rates of all-cause hospitalization (21.9% vs. 27.3%; P\ua075 years. Conclusions: There was a decline in GDMT use with advanced age in both sexes. Sex was not an independent predictor of GDMT or adverse outcomes. However, age >75 years independently predicted lower GDMT use and higher all-cause mortality in patients with LVEF 6445%

Wpływ rozdrobnienia struktury na własności mechaniczne stali mikrostopowych

The goal of the present work was to study the effect of grain size and strain rate on the mechanical properties of microalloyed steels. The range of the microstructures was developed and their mechanical properties were measured under quasi-static conditions. The influence of different thermomechanical parameters on grain refinement, and thus, on final mechanical behavior of these steels seems to be very important issue, because of their application as the materials with both high strength and ductility. There is a clear lack of understanding of the role of intermediate ultrafine microstructures on the mechanical response of structural steels, which is important as this is the refinement level most likely to be achieved under industrial processes. The main scope of this research includes the development of thermomechanical treatments to produce ultra fine-grained steels with enhanced properties. These materials will be developed for the application in many industries (e.g. automotive industry, shipbuilding), and in any commercial applications where very good properties and good-quality construction materials are of paramount importance. The results of this work will allow to systematically correlate the evolution of deformation microstructure and the deformation mechanisms operating in fine-grained materials during processing. This work will also be directed towards understanding the specific strengthening mechanisms by which the plastic deformation leads to a refined grain size.Celem przeprowadzonych badań jest ocena wpływu stopnia rozdrobnienia struktury na własności mechaniczne stali mikrostopowych. Uzyskano struktury o różnym stopniu rozdrobnienia, a następnie badano ich własności mechaniczne w warunkach quasi-statycznego obciążenia. Wpływ historii przeróbki termomechanicznej na rozdrobnienie mikrostruktury, a tym samym na końcowe własności mechaniczne, jest bardzo ważnym zagadnieniem ze względu na szeroki obszar zastosowań otrzymywanych tą drogą materiałów konstrukcyjnych. Jedną z cech charakterystycznych stali mikrostopowych jest korzystna kombinacja dobrych własności wytrzymałościowych i plastycznych. Zauważyć można brak badań w zakresie zrozumienia roli stopnia rozdrobnienia mikrostruktury w mechanice plastycznego płynięcia stali mikrostopowych. Istotny jest fakt, że dyskutowane w niniejszej pracy poziomy rozdrobnienia struktury ferrytycznej są już uzyskiwane w obecnie stosowanych procesach przemysłowych. Zakres przedstawionych badań obejmuje analizę procesów przeróbki termomechanicznej (kontrolowanego walcowania) pod kątem możliwości uzyskania struktur silnie rozdrobnionych. Konsekwencją silnego rozdrobnienia ferrytu jest możliwość istotnej poprawy własności mechanicznych. Badane w pracy, drobnoziarniste stale mikrostopowe znajdują coraz szersze zastosowanie w różnych gałęziach przemysłu (np. przemysł motoryzacyjny, stoczniowy), wszędzie tam gdzie istotne jest zastosowanie materiałów konstrukcyjnych o bardzo dobrej jakości i własnościach. Wyniki niniejszych badań pozwolą na usystematyzowanie powiązań pomiędzy rozwojem mikrostruktury a mechanizmami odkształcenia występującymi w materiałach drobnoziarnistych podczas procesu wytwarzania. Opracowane wnioski pozwalają na lepsze zrozumienie związków pomiędzy historią odkształcania a rozwojem mikrostruktury w stalach mikrostopowych