Forest vegetation management in Europe: current practice and future requirements

The book provides a record of the co-operation within Europe in the field of forest vegetation management through the Cost Action E47. The aims are: i)to provide a summary of the current state of the art' as it applies to forest vegetation management in Europe for scientists, practitioners and policymakers, affiliated to state, non-governmental or private commercial organizations; ii)to document existing forest weed control practices across Europe, and hence provide a resource of alternative solutions for individual countries sharing similar conditions and challenges; and iii)to identify common information gaps and future research needs, and hence potential future areas of collaboration for forest vegetation management scientists across Europe, along with barriers that may need to be overcome to achieve that aim.FORET;PEUPLEMENT FORESTIER;VEGETATION;CONCURRENCE VEGETALE;LUTTE;MODE DE TRAITEMENT;COOPERATION INTERNATIONALE;RECHERCHE DEVELOPPEMENT;DEVELOPPEMENT DURABLE;AMENAGEMENT FORESTIER;MAUVAISE HERBE;CONTROLE DE LA VEGETATION;PESTICIDE;LUTTE PHYTOSANITAIRE;IMPACT SUR L'ENVIRONNEMENT;DYNAMIQUE DE VEGETATION;HERBICIDE;BIODIVERSITE;ECOSYSTEME;HISTOIRE;GESTION FORESTIERE;EUROPE;VEGETATION FORESTIERE;ADVENTICE;ALTERNATIVES AUX HERBICIDES;

The catalytic removal of ammonia and nitrogen oxides from spacecabin atmospheres

Investigations were made on methods for the removal of ammonia and to a lesser extent nitrogen oxides in low concentrations from air. The catalytic oxidation of ammonia was studied over a temperature range of 250 F to 600 F and a concentration range 20 ppm to 500 ppm. Of the catalysts studied, 0.5 percent ruthenium supported on alumina was found to be superior. This material is active at temperatures as low as 250 F and was found to produce much less nitrous oxide than the other two active catalysts, platinum on alumina and Hopcalite. A quantitative design model was developed which will permit the performance of an oxidizer to be calculated. The ruthenium was found to be relatively insensitive to low concentrations of water and to oxygen concentration between 21 percent and 100 percent. Hydrogen sulfide was found to be a poison when injected in relatively large quantities. The adsorption of ammonia by copper sulfate treated silica gel was investigated at temperatures of 72 F and 100 F. A quantitative model was developed for predicting adsorption bed behavior

Effect of Crystallization of the Grain-Boundary Phase on the Thermal Diffusivity of a Sialon Ceramic

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/65865/1/j.1151-2916.1984.tb19519.x.pd

Cognitive Restoration in Children Following Exposure to Nature: Evidence From the Attention Network Task and Mobile Eye Tracking

Exposure to nature improves cognitive performance through a process of cognitive restoration. However, few studies have explored the effect in children, and no studies have explored how eye movements “in the wild” with mobile eye tracking technology contribute to the restoration process. Our results demonstrated that just a 30-min walk in a natural environment was sufficient to produce a faster and more stable pattern of responding on the Attention Network Task, compared with an urban environment. Exposure to the natural environment did not improve executive (directed) attention performance. This pattern of results supports suggestions that children and adults experience unique cognitive benefits from nature. Further, we provide the first evidence of a link between cognitive restoration and the allocation of eye gaze. Participants wearing a mobile eye-tracker exhibited higher fixation rates while walking in the natural environment compared to the urban environment. The data go some way in uncovering the mechanisms sub-serving the restoration effect in children and elaborate how nature may counteract the effects of mental fatigue

Predicting adolescents' continuation in club sports: A prospective cohort study of the importance of personal and contextual motivational factors in five sports in Denmark

Purpose: The purpose of this prospective cohort study was to investigate the influence of types of motivation, basic psychological needs satisfaction and of a coach-created motivational climate on continued participation in youth sports across types of sport, competitive levels, ages, and gender. Methods: Participants were 7110 adolescent (age 12–20 years) members of leisure time club organized in basketball, handball, football, badminton, and gymnastics in Denmark. Motivational regulation was measured with BRSQ-6, basic psychological needs satisfaction and frustration were measured with PNSS-S, and coach-created climate was measured with the EDMCQ-C. The participants' continuation or dropout was measured at the beginning of the following season with a short electronic questionnaire. Results: Intrinsic motivation, identified behavior regulation, experiences of competence, relatedness, and autonomy, as well as a coach-created empowering motivational climate, were associated with continuation both in the sport and in the club the following season across different sports, genders, age groups, and competitive levels. Introjected and external behavior regulation, frustrations with the need to experience competence, relatedness, and autonomy, as well as a disempowering coach-created climate, were associated with dropout. Conclusion: In Danish youth sports, autonomous motivation, satisfaction of basic psychological needs, and an empowering coach-created motivational climate have a positive impact on the continuation of the sport and the club the following season. In contrast, controlled types of motivation, needs frustration, and a disempowering coach-created climate are associated with dropout. This is the case at both elite and recreational levels, for boys and girls, adolescents, and youth

Vacuum fluctuation forces between ultra-thin films

We have investigated the role of the quantum size effects in the evaluation of the force caused by electromagnetic vacuum fluctuations between ultra-thin films, using the dielectric tensor derived from the particle in a box model. Comparison with the results obtained by adopting a continuum dielectric model shows that, for film thicknesses of 1-10 nm, the electron confinement causes changes in the force intensity with respect to the isotropic plasma model which range from 40% to few percent depending upon the film electron density and the film separation. The calculated force shows quantum size oscillations, which can be significant for film separation distances of several nanometers. The role of electron confinement in reducing the large distance Casimir force is discussed

Casimir Force on Real Materials - the Slab and Cavity Geometry

We analyse the potential of the geometry of a slab in a planar cavity for the purpose of Casimir force experiments. The force and its dependence on temperature, material properties and finite slab thickness are investigated both analytically and numerically for slab and walls made of aluminium and teflon FEP respectively. We conclude that such a setup is ideal for measurements of the temperature dependence of the Casimir force. By numerical calculation it is shown that temperature effects are dramatically larger for dielectrics, suggesting that a dielectric such as teflon FEP whose properties vary little within a moderate temperature range, should be considered for experimental purposes. We finally discuss the subtle but fundamental matter of the various Green's two-point function approaches present in the literature and show how they are different formulations describing the same phenomenon.Comment: 24 pages, 11 figures; expanded discussion, one appendix added, 1 new figure and 10 new references. To appear in J. Phys. A: Math. Theo

Casimir forces and non-Newtonian gravitation

The search for non-relativistic deviations from Newtonian gravitation can lead to new phenomena signalling the unification of gravity with the other fundamental interactions. Various recent theoretical frameworks indicate a possible window for non-Newtonian forces with gravitational coupling strength in the micrometre range. The major expected background in the same range is attributable to the Casimir force or variants of it if dielectric materials, rather than conducting ones, are considered. Here we review the measurements of the Casimir force performed so far in the micrometre range and how they determine constraints on non-Newtonian gravitation, also discussing the dominant sources of false signals. We also propose a geometry-independent parameterization of all data in terms of the measurement of the constant c. Any Casimir force measurement should lead, once all corrections are taken into account, to a determination of the constant c which, in order to assess the accuracy of the measurement, can be compared with its more precise value known through microscopic measurements. Although the last decade of experiments has resulted in solid demonstrations of the Casimir force, the situation is not conclusive with respect to being able to discover new physics. Future experiments and novel phenomenological analysis will be necessary to discover non-Newtonian forces or to push the window for their possible existence into regions of the parameter space which theoretically appear unnatural.Comment: Also available at http://www.iop.org/EJ/abstract/1367-2630/8/10/23

Prediction of function in daily life following multidisciplinary rehabilitation for individuals with chronic musculoskeletal pain; a prospective study

Background: The prevalence of chronic musculoskeletal pain is high, with widespread negative economic, psychological, and social consequences for the individual. It is therefore important to find ways to predict the outcome of rehabilitation programmes in terms of function in daily life. The aims of this study were to investigate the improvements over time from multidisciplinary rehabilitation in terms of pain and function, and analyse the relative impact of individual and psychosocial factors as predictors of function in daily life in individuals with chronic musculoskeletal pain. Methods: A prospective study was conducted among one hundred and forty three (N = 143) musculoskeletal pain patients. Measures of pain, function, and functional health status were obtained at baseline, after 5 weeks of intensive training, at the end of the 57-week rehabilitation programme, and at a 1 year follow-up, using validated self-administrated measures. Linear regression analysis was applied to investigate the relative impact of musculoskeletal pain, individual- , and psychosocial factors in function. Results: The participants studied showed a significant increase in function during the 57 weeks rehabilitation period. There was also a significant increase in function from the end of the rehabilitation period (57th week) to the one year follow-up measures. Pain intensity associated significantly with pain experience over all measurement periods. High levels of pain intensity (β = .42**) and pain experience (β = .37*), and poor psychological capacity (β = -.68*) at baseline, as well as poor physiological capacity (β = -.44**) and high levels of anxiety (β = .48**) and depression (β = .58***) at the end of the rehabilitation program were the most important prognostic factors of variance in functioning over the 4 measurement periods. Conclusion: The data suggest that physical capacity, emotional distress and coping skills should be priority areas in rehabilitation programmes to improve functioning in daily life