9,046 research outputs found
Design Equations for Tensile Rupture Resistance of Bolted Connections in Cold-Formed Steel Members
This paper summarises and re-examines the authors’ previous research results concerning the tensile rupture resistance of cold-formed steel bolted connections in a flat sheet, in a channel’s web, and in one leg of an angle section. Staggered bolted connections are also included. The fundamental shortcomings of the design equations given in the 2012 North American Specification for the Design of Cold-formed Steel Structural Members are described, and the alternative design equations proposed by the authors are shown. The alternative equations are checked against laboratory test results obtained by the authors and other researchers where the bolts had not been snug-tightened and the failure modes were correctly identified. The reliability analyses previously carried out by the authors are repeated using additional test data and the statistical data provided in the current North American specification. A uniform resistance factor of 0.70 is recommended for all the proposed equations for determining the tensile rupture resistance of bolted connections in cold-formed steel members
A buckling model for the stability design of steel columns with intermediate gravity loads
This paper points out an accurate buckling model for determining the flexural effective length of a steel column subjected to intermediate gravity loads, for applications in the 2D second-order elastic analysis based design procedure. The proposed buckling model has notional horizontal restraints where equivalent horizontal forces have been applied, and can be readily programmed into a structural analysis/design software. Thirty columns having various end restraints and subjected to concentrated gravity loads within their unsupported lengths are analysed to demonstrate the merits of the proposed buckling model. It is shown that, in most of the cases analysed, the proposed buckling model leads to more liberal column capacities compared to the use of the unity effective length factor or the buckling model described in the European drive-in rack design code. The more liberal capacities are very close to the ultimate loads determined through second-order plastic-zone analysis
In-plane Shear Lag of Bolted Connections
This paper points out that the shear lag factors embedded in the design equations specified in the North American, European and Australasian cold-formed steel structures codes for determining the net section tension capacity of bolted connections in flat steel sheets either yield “anomalous” results or become irrelevant when they exceed unity. The anomaly is demonstrated through laboratory tests and is explained using simple calculus. A proper mathematical expression for the in-plane shear lag factor, which does not suffer from the anomaly of the code equations and never implies shear lag factors greater than unity for any configuration, is presented and found to yield improved results compared to the current code equations. A resistance factor of 0.8 for the proposed equation is determined with respect to the LRFD approach given in the North American specification for the design of cold-formed steel structures
Induced folding in RNA recognition by Arabidopsis thaliana DCL1
DCL1 is the ribonuclease that carries out miRNA biogenesis in plants. The enzyme has two tandem double stranded RNA binding domains (dsRBDs) in its C-terminus. Here we show that the first of these domains binds precursor RNA fragments when isolated and cooperates with the second domain in the recognition of substrate RNA. Remarkably, despite showing RNA binding activity, this domain is intrinsically disordered. We found that it acquires a folded conformation when bound to its substrate, being the first report of a complete dsRBD folding upon binding. The free unfolded form shows tendency to adopt folded conformations, and goes through an unfolded bound state prior to the folding event. The significance of these results is discussed by comparison with the behavior of other dsRBDs.Fil: Suarez, Irina Paula. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Centro CientĂfico TecnolĂłgico Conicet - Rosario. Instituto de BiologĂa Molecular y Celular de Rosario. Universidad Nacional de Rosario. Facultad de Ciencias BioquĂmicas y FarmacĂ©uticas. Instituto de BiologĂa Molecular y Celular de Rosario; ArgentinaFil: Burdisso, Paula. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Centro CientĂfico TecnolĂłgico Conicet - Rosario. Instituto de BiologĂa Molecular y Celular de Rosario. Universidad Nacional de Rosario. Facultad de Ciencias BioquĂmicas y FarmacĂ©uticas. Instituto de BiologĂa Molecular y Celular de Rosario; ArgentinaFil: Benoit Matthieu P. M. H.. Institut de Biologie Structurale Jean Pierre Ebel; FranciaFil: Boisbouvier, Jerome. Institut de Biologie Structurale Jean Pierre Ebel; FranciaFil: Rasia, Rodolfo Maximiliano. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Centro CientĂfico TecnolĂłgico Conicet - Rosario. Instituto de BiologĂa Molecular y Celular de Rosario. Universidad Nacional de Rosario. Facultad de Ciencias BioquĂmicas y FarmacĂ©uticas. Instituto de BiologĂa Molecular y Celular de Rosario; Argentin
The Orbits of Meteorites from Natural Thermoluminescence
The natural thermoluminescence (TL) of meteorites reflects their irradiation and thermal histories. Virtually all ordinary chondrites have been irradiated long enough to reach saturation natural TL levels, and thus natural TL levels in these meteorites are determined largely by thermal history. The primary heat source for most meteorites is the Sun, and thus natural TL levels are determined primarily by the closest approach to the Sun, i.e., perihelion. By converting natural TL levels to perihelia, using an assumed albedo typical of meteoroid bodies, it is found that most ordinary chondrites had perihelia of 0.85 to 1.0 AU prior to reaching Earth. This range is similar to that calculated from meteor and fireball observations. All common classes of ordinary chondrites exhibit similar perihelia distributions; however, H and LL chondrites that fell in the local morning differ in their natural TL distribution from those that fell in the local afternoon or evening. This is consistent with earlier suggestions that time of fall reflects orbital distribution. The data also suggest that the orbits of some of the H chondrites cluster and may have come from a debris 'stream' of meteoroids. If meteorites can exist in "orbital groups," significant changes in the types and number of meteorites reaching Earth could occur on the less than 10(exp 5)-year time scale
Geometrical Frustration and Static Correlations in Hard-Sphere Glass Formers
We analytically and numerically characterize the structure of hard-sphere
fluids in order to review various geometrical frustration scenarios of the
glass transition. We find generalized polytetrahedral order to be correlated
with increasing fluid packing fraction, but to become increasingly irrelevant
with increasing dimension. We also find the growth in structural correlations
to be modest in the dynamical regime accessible to computer simulations.Comment: 21 pages; part of the "Special Topic Issue on the Glass Transition
The Cooling History and Structure of the Ordinary Chondrite Parent Bodies
Most major meteorite classes exhibit significant ranges of metamorphism. The effects of metamorphism have been extensively characterized, but the heat source(s) and the metamorphic environment are unknown. Proposed beat sources include Al-26, Fe-60, electromagnetic induction, and impact. It is typically assumed that metamorphism occurred in parent bodies of some sort, but it uncertain whether these bodies were highly structured ("onion skins") or were chaotic mixes of material ("rubble piles"). The lack of simple trends of metallographic cooling rates with petrologic type has been considered supportive of both concepts. In this study, we use induced thermoluminescence (TL) as an indicator of thermal history. The TL of ordinary chondrites is produced by sodic feldspar, and the induced TL peak temperature is related to its crystallographic order/disorder. Ordered feldspar has TL peak temperatures of approx. 120 C, and disordered feldspar has TL peak temperatures of approx. 220 C. While ordered feldspar can be easily disordered in the laboratory by heating above 650 C and is easily quenched in the disordered form, producing ordered feldspar requires cooling at geologic cooling rates. We have measured the induced TL properties of 101 equilibrated ordinary chondrites, including 49 H, 29 L, and 23 LL chondrites. For the H chondrites there is an apparent trend of decreasing induced TL peak temperature with increasing petrologic type. H4 chondrites exhibit a tight range of TL peak temperatures, 190 C - 200 C, while H6 chondrites exhibit TL peak temperatures between 180 C and 190 C. H5 chondrites cover the range between H4 and H6, and also extend up to 210 C. Similar results are obtained for LL chondfiles and most L6 chondrites have lower induced TL peak temperatures than L5 chondrites
CPT symmetry and antimatter gravity in general relativity
The gravitational behavior of antimatter is still unknown. While we may be
confident that antimatter is self-attractive, the interaction between matter
and antimatter might be either attractive or repulsive. We investigate this
issue on theoretical grounds. Starting from the CPT invariance of physical
laws, we transform matter into antimatter in the equations of both
electrodynamics and gravitation. In the former case, the result is the
well-known change of sign of the electric charge. In the latter, we find that
the gravitational interaction between matter and antimatter is a mutual
repulsion, i.e. antigravity appears as a prediction of general relativity when
CPT is applied. This result supports cosmological models attempting to explain
the Universe accelerated expansion in terms of a matter-antimatter repulsive
interaction.Comment: 6 pages, to be published in EPL (http://epljournal.edpsciences.org/
The group A3 chondrules of Krymka: Further evidence for major evaporative loss during the formation of chondrules
Like Semarkona (type 3.0), Krymka (type 3.1) contains two distinct types of chondrule (namely groups A and B) which differ in their bulk compositions, phase compositions, and CL properties. The group A chondrules in both meteorites show evidence for major loss of material by evaporation(i.e. elemental abundance patterns, size, redox state, olivine-pyroxene abundances). Group A and B chondrules probably formed from common or very similar precursors by the same processes acting with different intensities, group A suffering greater mass-loss by evaporation and reduction of FeO and SiO2. While Krymka chondrules share many primary mineralogical and compositional properties with Semarkona chondrules, the minimal metamorphism it has suffered has also had a significant effect on its chondrules
On the signature of tensile blobs in the scattering function of a stretched polymer
We present Monte Carlo data for a linear chain with excluded volume subjected
to a uniform stretching. Simulation of long chains (up to 6000 beads) at high
stretching allows us to observe the signature of tensile blobs as a crossover
in the scaling behavior of the chain scattering function for wave vectors
perpendicular to stretching. These results and corresponding ones in the
stretching direction allow us to verify for the first time Pincus prediction on
scaling inside blobs. Outside blobs, the scattering function is well described
by the Debye function for a stretched ideal chain.Comment: 4 pages, 4 figures, to appear in Physical Review Letter
- …