Wet Etching and Surface Analysis of Chemically Treated InGaN Films

This paper discusses the performance of different wet chemical etchants on InGaN. It is shown that certain etchants can be used to chemically etch and remove appreciable amounts of InGaN even though the etch rate is not as high as observed for other III-V materials. The performance of etchants studied here were (i) two different ratios of HF, HNO3, (ii) cyclic usage of NH4OH followed by HCl, (iii) hot H2SO4 and H3PO4 mixture, and (iv) conc. NH4OH. The etched surfaces have then been analyzed by x-ray photoelectron spectroscopy (XPS). Different etch residues were observed on the top surface. These results suggest an alternative to reactive plasma etching or photo-enhanced electrochemical etching of InGaN type materials. Based on the observed performance of the etchants studied, it was also possible to segregate the surface cleaning protocols and etchants

Conductivity in Jurkat cell suspension after ultrashort electric pulsing

Ultrashort electric pulses applied to similar cell lines such as Jurkat and HL-60 cells can produce markedly different results , which have been documented extensively over the last few years. We now report changes in electrical conductivity of Jurkat cells subjected to traditional electroporation pulses (50 ms pulse length) and ultrashort pulses (10 ns pulse length) using time domain dielectric spectroscopy (TDS). A single 10 ns, 150 kV/cm pulse did not noticeably alter suspension conductivity while a 50 ms, 2.12 kV/cm pulse with the same energy caused an appreciable conductivity rise. These results support the hypothesis that electroporation pulses primarily interact with the cell membrane and cause conductivity rises due to ion transport from the cell to the external media, while pulses with nanosecond duration primarily interact with the membranes of intracellular organelles. However, multiple ultrashort pulses have a cumulative effect on the plasma membrane, with five pulses causing a gradual rise in conductivity up to ten minutes post-pulsing

An efficient computer forensics selective imaging model

Selective imaging is a new concept in computer forensics. It is used for collecting only the data that is relevant to the crime and helps in improves the scalability of the investigation process. However, the current selective imaging approaches directly image the identified data without considering their offsets on the targeted user storage. This paper investigates the impact of the relevant data offsets on the efficiency of the selective imaging process. A practical selective imaging model is presented which includes a digital evidence ordering algorithm (DEOA) for ordering the selected relevant data items. The proposed selective imaging model has been implemented and evaluated in different types of storage devices. The evaluation result shows that even if our proposed algorithm has a small efficiency negative impact before the imaging process starts; it has a large positive effect on the efficiency of the selective imaging process itself

Nanosecond electric pulses penetrate the nucleus and enhance speckle formation

Nanosecond electric pulses generate nanopores in the interior membranes of cells and modulate cellular functions. Here, we used confocal microscopy and flow cytometry to observe Smith antigen antibody (Y12) binding to nuclear speckles, known as small nuclear ribonucleoprotein particles (snRNPs) or intrachromatin granule clusters (IGCs), in Jurkat cells following one or five 10 ns, 150 kV/cm pulses. Using confocal microscopy and flow cytometry, we observed changes in nuclear speckle labeling that suggested a disruption of pre-messenger RNA splicing mechanisms. Pulse exposure increased the nuclear speckled substructures by 2.5-fold above basal levels while the propidium iodide (PI) uptake in pulsed cells was unchanged. The resulting nuclear speckle changes were also cell cycle dependent. These findings suggest that 10 ns pulses directly influenced nuclear processes, such as the changes in the nuclear RNA–protein complexes

Triple Aims Healthcare Policy Voices of Graduate Student Interprofessional Team Members

The purpose of this study is to share the voices of healthcare graduate students participating in an interprofessional course experience, particularly as their voice relate to fundamental healthcare issues care embodied in the Triple Aims. Two research questions guided study efforts: (1) how do graduate students perceive the value of interprofessional learning experiences for their professional development as future healthcare providers? and (2) based on these experiences, how do students perceive the potential for interprofessional teams to address the Triple Aims of health care? This study was based on the qualitative approach of inductive thematic coding (Braun & Clarke, 2006). Findings indicated that course experiences led to favorable perspectives towards interprofessional practice, with students citing particular benefits regarding more effective and efficient patient service. Students also perceived that interprofessional healthcare would advance current practice regarding the first two triple aims (patient healthcare outcomes and patient satisfaction) due its focus on patient-centered care, improved provider communication, and better-informed treatment decisions. Regarding the third triple aim (reduced costs), students noted that healthcare cost savings were possible, but these must be viewed with a macro lens from a long-term perspective

Modelling the Wolbachia incompatible insect technique: strategies for effective mosquito population elimination

Background: The Wolbachia incompatible insect technique (IIT) shows promise as a method for eliminating populations of invasive mosquitoes such as Aedes aegypti (Linnaeus) (Diptera: Culicidae) and reducing the incidence of vector-borne diseases such as dengue, chikungunya and Zika. Successful implementation of this biological control strategy relies on high-fidelity separation of male from female insects in mass production systems for inundative release into landscapes. Processes for sex-separating mosquitoes are typically error-prone and laborious, and IIT programmes run the risk of releasing Wolbachia-infected females and replacing wild mosquito populations. Results: We introduce a simple Markov population process model for studying mosquito populations subjected to a Wolbachia-IIT programme which exhibit an unstable equilibrium threshold. The model is used to study, in silico, scenarios that are likely to yield a successful elimination result. Our results suggest that elimination is best achieved by releasing males at rates that adapt to the ever-decreasing wild population, thus reducing the risk of releasing Wolbachia-infected females while reducing costs. Conclusions: While very high-fidelity sex separation is required to avoid establishment, release programmes tend to be robust to the release of a small number of Wolbachia-infected females. These findings will inform and enhance the next generation of Wolbachia-IIT population control strategies that are already showing great promise in field trials

High Performance Charge Breeder for HIE-ISOLDE and TSR@ISOLDE Applications

We report on the development of the HEC2 (High Energy Compression and Current) charge breeder, a possible high performance successor to REXEBIS at ISOLDE. The new breeder would match the performance of the HIE-ISOLDE linac upgrade and make full use of the possible installation of a storage ring at ISOLDE (the TSR@ISOLDE initiative [1]). Dictated by ion beam acceptance and capacity requirements, the breeder features a 2-3.5 A electron beam. In many cases very high charge states, including bare ions up to Z=70 and Li/Na-like up to Z=92 could be requested for experiments in the storage ring, therefore, electron beam energies up to 150 keV are required. The electron-beam current density needed for producing ions with such high charge states at an injection rate into TSR of 0.5-1 Hz is between 10 and 20 kA/cm2, which agrees with the current density needed to produce A/q<4.5 ions for the HIE-ISOLDE linac with a maximum repetition rate of 100 Hz. The first operation of a prototype electron gun with a pulsed electron beam of 1.5 A and 30 keV was demonstrated in a joint experiment with BNL [2]. In addition, we report on further development aiming to achieve CW operation of an electron beam having a geometrical transverse ion-acceptance matching the injection of 1+ ions (11.5 {\mu}m), and an emittance/energy spread of the extracted ion beam matching the downstream mass separator and RFQ (0.08 {\mu}m normalized / +/- 1% ).Comment: 9 pages, 8 figures, EBIST14 conference pape

A Dual TLR Agonist Adjuvant Enhances the Immunogenicity and Protective Efficacy of the Tuberculosis Vaccine Antigen ID93

With over eight million cases of tuberculosis each year there is a pressing need for the development of new vaccines against Mycobacterium tuberculosis. Subunit vaccines consisting of recombinant proteins are an attractive vaccine approach due to their inherent safety compared to attenuated live vaccines and the uniformity of manufacture. Addition of properly formulated TLR agonist-containing adjuvants to recombinant protein vaccines enhances the antigen-specific CD4+ T cell response characterized by IFN-γ and TNF, both of which are critical for the control of TB. We have developed a clinical stage vaccine candidate consisting of a recombinant fusion protein ID93 adjuvanted with the TLR4 agonist GLA-SE. Here we examine whether ID93+GLA-SE can be improved by the addition of a second TLR agonist. Addition of CpG containing DNA to ID93+GLA-SE enhanced the magnitude of the multi-functional TH1 response against ID93 characterized by co-production of IFN-γ, TNF, and IL-2. Addition of CpG also improved the protective efficacy of ID93+GLA-SE. Finally we demonstrate that this adjuvant synergy between GLA and CpG is independent of TRIF signaling, whereas TRIF is necessary for the adjuvant activity of GLA-SE in the absence of CpG

Heat tolerance in common bean derived from interspecific crosses

Many Countries could experience unprecedented heat stress because of global climate change (Battisti and Naylor,2009). Heat sensitivity in common bean is a major limiting factor that can reduce yield, quality, and lead to restricted geographic adaptation (Beebeetal.,2011). Interspecific lines developed with crosses between P.vulgaris and P. acutifolius were evaluated for their tolerance to heat stress. Results from field and greenhouse evaluation confirmed that Phaseolus acutifolius is an important and useful genetic resource for improving heat tolerance in common bean. Results from genomic analysis indicated the introgression of P. acutifolious genes into interspecific INB line that was used as apparent for developing heat tolerant SEF lines