Development and testing of hermetic, laser-ignited pyrotechnic and explosive components

During the last decade there has been increasing interest in the use of lasers in place of electrical systems to ignite various pyrotechnic and explosive materials. The principal driving force for this work was the requirement for safer energetic components which would be insensitive to electrostatic and electromagnetic radiation. In the last few years this research has accelerated since the basic concepts have proven viable. At the present time it is appropriate to shift the research emphasis in laser initiation from the scientific arena--whether it can be done--to the engineering realm--how it can be put into actual practice in the field. Laser initiation research and development at EG&G Mound was in three principal areas: (1) laser/energetic material interactions; (2) development of novel processing techniques for fabricating hermetic (helium leak rate of less than 1 x 10(exp -8) cu cm/s) laser components; and (3) evaluation and testing of laser-ignited components. Research in these three areas has resulted in the development of high quality, hermetic, laser initiated components. Examples are presented which demonstrate the practicality of fabricating hermetic, laser initiated explosive or pyrotechnic components that can be used in the next generation of ignitors, actuators, and detonators

Report of the Terrestrial Bodies Science Working Group. Volume 7: The Galilean satellites

The formational and evolutionary history of natural satellites, their mineralogical composition and other phenomena of scientific interest are discussed. Key scientific questions about IO, Ganymede, Callisto, and Europa are posed and the measurements and instruments required for a Galilean satellite lander in the 1980's are described

The kinematics of the quadrupolar nebula M1-75 and the identification of its central star

The link between the shaping of bipolar planetary nebulae and their central stars is still poorly understood. The kinematics and shaping of the multipolar nebula M 1-75 are hereby investigated, and the location and nature of its central star are briefly discussed. Fabry-Perot data from GHaFAS on the WHT sampling the Doppler shift of the [N II] 658.3 nm line are used to study the dynamics of the nebula, by means of a detailed 3-D spatio-kinematical model. Multi-wavelength images and spectra from the WFC and IDS on the INT, and from ACAM on the WHT, allowed us to constrain the parameters of the central star. The two pairs of lobes, angularly separated by ~22 degrees, were ejected simultaneously approx. ~3500-5000 years ago, at the adopted distance range from 3.5 to 5.0 kpc. The larger lobes show evidence of a slight degree of point symmetry. The shaping of the nebula could be explained by wind interaction in a system consisting of a post-AGB star surrounded by a disc warped by radiative instabilities. This requires the system to be a close binary or a single star which engulfed a planet as it died. On the other hand, we present broad- and narrow-band images and a low S/N optical spectrum of the highly-reddened, previously unnoticed star which is likely the nebular progenitor. Its estimated V-I colour allows us to derive a rough estimate of the parameters and nature of the central star.Comment: 8 pages, 6 figures, accepted for publication in Astronomy & Astrophysic

Mixed Early and Late-Type Properties in the Bar of NGC 6221: Evidence for Evolution along the Hubble Sequence?

Rotation curves and velocity dispersion profiles are presented for both the stellar and gaseous components along five different position angles (P.A.=5, 50, 95, 125 and 155 degrees) of the nearby barred spiral NGC 6221. The observed kinematics extends out to about 80" from the nucleus. Narrow and broad-band imaging is also presented. The radial profiles of the fluxes ratio [NII]/Halpha reveal the presence of a ring-like structure of ionized gas, with a radius of about 9" and a deprojected circular velocity of about 280 km/s. The analysis of the dynamics of the bar indicates this ring is related to the presence of an inner Lindblad resonance (ILR) at 1.3 kpc. NGC6221 is found to exhibit intermediate properties between those of the early-type barred galaxies: the presence of a gaseous ring at an ILR, the bar edge located between the ILR's and the corotation radius beyond the steep rising portion of the rotation curve, the dust-lane pattern, and those of the late-type galaxies: an almost exponential surface brightness profile, the presence of Halpha regions along all the bar, the spiral-arm pattern. It is consistent with scenarios of bar-induced evolution from later to earlier-type galaxies.Comment: 1 File ds7406.tar.gz which contains: one latex file (ds7406.tex), and 10 encsulated postscript figures (ds7406f**.eps). To be compiled with aa-l latex2e macro style. To be published in A&A Sup. Serie

Evolution of the anti-truncated stellar profiles of S0 galaxies since z=0.6z=0.6 in the SHARDS survey: I - Sample and Methods

The controversy about the origin of the structure of S0--E/S0 galaxies may be due to the difficulty of comparing surface brightness profiles with different depths, photometric corrections and PSF effects (almost always ignored). We aim to quantify the properties of Type-III (anti-truncated) discs in a sample of S0 galaxies at 0.2<z<0.6. In this paper, we present the sample selection and describe in detail the methods to robustly trace the structure in their outskirts and correct for PSF effects. We have selected and classified a sample of 150 quiescent galaxies at 0.2<z<0.6 in the GOODS-N field. We perform a quantitative structural analysis of 44 S0-E/S0 galaxies. We corrected their surface brightness profiles for PSF distortions and analysed the biases in the structural and photometric parameters when the PSF correction is not applied. Additionally, we have developed Elbow, an automatic statistical method to determine whether a possible break is significant - or not - and its type and made it publicly available. We found 14 anti-truncated S0-E/S0 galaxies in the range 0.2<z<0.6 (~30% of the final sample). This fraction is similar to the those reported in the local Universe. In our sample, ~25% of the Type-III breaks observed in PSF-uncorrected profiles are artifacts, and their profiles turn into a Type I after PSF correction. PSF effects also soften Type-II profiles. We found that the profiles of Type-I S0 and E/S0 galaxies of our sample are compatible with the inner profiles of the Type-III, in contrast with the outer profiles. We have obtained the first robust and reliable sample of 14 anti-truncated S0--E/S0 galaxies beyond the local Universe, in the range 0.2<z<0.6. PSF effects significantly affect the shape of the surface brightness profiles in galaxy discs even in the case of the narrow PSF of HST/ACS images, so future studies on the subject should make an effort to correct them.Comment: Accepted for publishing in Astronomy & Astrophysics. 75 pages, 57 figure

Production and quality assurance automation in the Goddard Space Flight Center Flight Dynamics Facility

The Flight Dynamics Facility (FDF) at the NASA Goddard Space Flight Center (GSFC) generates numerous products for NASA-supported spacecraft, including the Tracking and Data Relay Satellites (TDRS's), the Hubble Space Telescope (HST), the Extreme Ultraviolet Explorer (EUVE), and the space shuttle. These products include orbit determination data, acquisition data, event scheduling data, and attitude data. In most cases, product generation involves repetitive execution of many programs. The increasing number of missions supported by the FDF has necessitated the use of automated systems to schedule, execute, and quality assure these products. This automation allows the delivery of accurate products in a timely and cost-efficient manner. To be effective, these systems must automate as many repetitive operations as possible and must be flexible enough to meet changing support requirements. The FDF Orbit Determination Task (ODT) has implemented several systems that automate product generation and quality assurance (QA). These systems include the Orbit Production Automation System (OPAS), the New Enhanced Operations Log (NEOLOG), and the Quality Assurance Automation Software (QA Tool). Implementation of these systems has resulted in a significant reduction in required manpower, elimination of shift work and most weekend support, and improved support quality, while incurring minimal development cost. This paper will present an overview of the concepts used and experiences gained from the implementation of these automation systems