17 research outputs found
Экстравазальная коррекция клапанов глубоких вен у пациентов с рецидивом варикозной болезни нижних конечностей
варикозное расширение вен /хирвеныконечность нижняя /хи
On the EU-Japan roadmap for experimental research on corium behavior
A joint research roadmap between Europe and Japan has been developed in severe accident field of light water reactors, focusing particularly on reactor core melt (corium) behavior. The development of this roadmap is one of the main targets of the ongoing EU project SAFEST. This paper presents information about ongoing severe accident studies in the area of corium behavior, rationales and comparison of research priorities identified in different projects and documents, expert ranking of safety issues, and finally the research areas and topics and their priorities suggested for the EU-Japan roadmap and future bilateral collaborations. These results provide useful guidelines for (i) assessment of long-term goals and proposals for experimental support needed for proper understanding, interpretation and learning lessons of the Fukushima accident; (ii) analysis of severe accident phenomena; (iii) development of accident prevention and mitigation strategies, and corresponding technical measures; (iv) study of corium samples in European and Japanese laboratories; and (v) preparation of Fukushima site decommissioning
Numerical assessment for entry condition of severe accident management guidelines in a Swedish nuclear power plant
The entry conditions of severe accident management guidelines (SAMGs) in pressurized water reactors (PWRs) rely on the indication of core exit temperature (CET). Yet, the setpoints for the CET may be different from plant to plant. Most Westinghouse PWR designs adopt the setpoint of CET at 650℃ as the entry condition of the SAMGs, since this setpoint is an effective indicator of core damage in a wide spectrum of accident sequences. Motivated by the interest in the verification & validation of SAMS after the Fukushima accidents, the present study is conducted numerically to verify the effectiveness of the CET setpoint for the transition from emergency operation procedures (EOPs) to SAMGs in a Swedish nuclear power plant. For this purpose, six representative severe accident sequences covering the main contributors to the core damage frequency (CDF) are analyzed using the MELCOR code. Moreover, different CET readings and alternative entry conditions are also investigated. The simulation results show that the average CET = 650 °C is the effective setpoint as the entry condition of SAMGs, i.e., given this setpoint the transition from EOPs to SAMGs will take place slightly before the occurrence of core degradation, which secures the intended mitigation of SAMGs while keeping EOPs active as long as possible. On the other hand, it is too conservative if the maximum CET = 650 °C is used as the setpoint of entry condition of SAMGs, i.e., it will result in an excessive realization of SAMGs over EOPs. The coolant temperature in the primary circuits, the water level in the RPV and the hydrogen concentration in the containment can also be applied as reference indications of core damage states in the accident management. QC 20220216</p
Sensitivity Study of Steam Explosion Characteristics to Uncertain Input Parameters Using TEXAS-V Code
Release of core melt from failed reactor vessel into a pool of water is adopted in several existing designs of light water reactors (LWRs) as an element of severe accident mitigation strategy. Corium melt is expected to fragment, solidify and form a debris bed coolable by natural circulation. However, steam explosion can occur upon melt release threatening containment integrity and potentially leading to large early release of radioactive products to the environment. There are many factors and parameters that could be considered for prediction of the fuel-coolant interaction (FCI) energetics, but it is not clear which of them are the most influential and should be addressed in risk analysis. The goal of this work is to assess importance of different uncertain input parameters used in FCI code TEXAS-V for prediction of the steam explosion energetics. Both aleatory uncertainty in characteristics of melt release scenarios and water pool conditions, and epistemic uncertainty in modeling are considered. Ranges of the uncertain parameters are selected based on the available information about prototypic severe accident conditions in a reference design of a Nordic BWR. Sensitivity analysis with Morris method is implemented using coupled TEXAS-V and DAKOTA codes. In total 12 input parameters were studied and 2 melt release scenarios were considered. Each scenario is based on 60,000 of TEXAS-V runs. Sensitivity study identified the most influential input parameters, and those which have no statistically significant effect on the explosion energetics. Details of approach to robust usage of TEXAS-V input, statistical enveloping of TEXAS-V output and interpretation of the results are discussed in the paper. We also provide probability density function (PDF) of steam explosion impulse estimated using TEXAS-V for reference Nordic BWR. It can be used for assessment of the uncertainty ranges of steam explosion loads for given ranges of input parameters.QC 20150427</p
Dynamic hybrid reliability studies of a decay heat removal system
International audienceSome critical safety systems exhibit the characteristics of hybrid stochastic class whose performance depends on the dynamic interactions of deterministic variables of physical phenomena and probabilistic variables of system failures. However, conventional probabilistic safety assessment (PSA) method involves static event and linked fault tree analysis and does not capture the dynamic interactions of such hybrid stochastic systems. Additionally, the existing dynamic PSA methods do not considers any repair possibility of some failed components during safety assessment. To address these issues, this paper presents a dynamic hybrid reliability assessment scheme for performance studies of repairable nuclear safety systems during a mission time. This scheme combines the features of reliability block diagram (RBD) for system compositions and partial differential equations for system physics using a customized stochastic hybrid automata tool implemented on Python platform. A case study of decay heat removal (DHR) systems has been performed using the introduced scheme. The impacts of failure rates and repair rates on sodium temperature evolution over a mission time have been analyzed. The results provide useful safety insights in mission safety tests of DHR systems. In sum, this work advances the dynamic safety assessment approach for complex system designs including nuclear power plants
Insight into steam explosion in stratified melt-coolant configuration
Release of core melt from failed reactor vessel into a pool of water is adopted in several existing designs of light water reactors (LWRs) as an element of severe accident mitigation strategy. When vessel breach is large and water pool is shallow, released corium melt can reach containment floor in liquid form and spread under water creating a stratified configuration of melt covered by coolant. Steam explosion in such stratified configuration was long believed as of secondary importance for reactor safety because it was assumed that considerable mass of melt cannot be premixed with the coolant. In this work we revisit these assumptions using recent experimental observations from the stratified steam explosion tests in PULiMS facility. We demonstrate that (i) considerable melt-coolant premixing layer can be formed in the stratified configuration with high temperature melts, (ii) mechanism responsible for the premixing is apparently more efficient than previously assumed Rayleigh-Taylor or Kelvin-Helmholtz instabilities. We also provide data on measured and estimated impulses, energetics of steam explosion, and resulting thermal to mechanical energy conversion ratios. QC 20131212</p